渗流井合理竖井降深确定

通过采用单位面积河流在单位水头差作用下的渗漏量来表征河流渗漏能力,建立渗流井取水理想模型,分别计算了在不同河流渗漏能力和含水层渗透性能条件下,竖井降深对渗流井出水量的影响.建立渗流井取水非稳定流模型,计算了在前期稳定竖井降深不同条件下,河流断流后渗流井出水量衰减过程及竖井降深发展过程.提出渗流井合理竖井降深应根据河流与地下水是否脱节以及含水层渗透性能,在岸边渗流井中部及一侧各布设一个观测孔,根据观测孔水位进行确定.对于含水层渗透性能较强地区,渗流井竖井降深应使得渗流井范围内地下水位与河流脱节,但高于辐射孔顶面;对于含水层渗透性能较差地区,渗流井竖井降深应使得侧部观测孔水位接近河床底面或刚出现脱节.     

莒县三措并举切实搞好耕地保护工作

损毁山体严重影响城市和交通沿线景观,景观影响度可作为一个综合指标来反映损毁山体对城市景观的影响程度。应用专家评分综合评判法结合地理信息系统确定景观影响度分级标准,对损毁山体进行景观影响程度的评价与分析,得出景观影响度分类结果,为损毁山体的治理规划和有序整治提供科学依据。     

Dynamics of arrays of floating point-absorber wave energy converters with inter-body and bottom slack-mooring connections

If point absorbers are employed in the extensive exploitation of the offshore wave energy resource, they should be deployed in arrays, the distance between the elements in the array being possibly tens of meters. In such cases, it may be more convenient that the array is spread moored to the sea bottom through only some of its elements, located in the periphery, while the other array elements are prevented from drifting and colliding with each other by connections to adjacent elements. An array of identical floating point absorbers located at the grid points of an equilateral triangular grid is considered in the paper. A spread set of slack-mooring lines connect the peripheric floaters to the bottom. A weight is located at the centre of each triangle whose function is to pull the three floaters towards each other and keep the inter-body mooring lines under tension. The power take-off system (PTO) is a linear damper activated by the buoy heaving motion. The whole system–buoys, moorings and power take-off systems–is assumed linear, so that a frequency domain analysis may be employed. Hydrodynamic interference between the oscillating buoys in array is accounted for. Equations are presented for a set of three identical point absorbers. This is then extended to more complex equilateral triangular grid arrays. Results from numerical simulations, with regular and irregular waves, are presented for the motions and power absorption of hemispherical converters in arrays of three and seven elements and for different mooring parameters and wave incidence angles. Comparisons are given with the unmoored and independently-moored buoy situations.     

NUFFT-Based Iterative Reconstruction Algorithm for Synthetic Aperture Imaging Radiometers

Synthetic aperture imaging radiometers (SAIRs) are powerful sensors for high-resolution observation of the Earth at low microwave frequencies. However, the future application of this new technology is limited by its large number of element antennas and receiving channels. In order to further reduce the complexity of the whole system, the circular and rotating array configurations have been proposed. Their disadvantages lie primarily in more complicated image reconstruction, because the conventional fast Fourier transform (FFT) method could not be used directly for image reconstruction. This letter introduces an iterative method for the reconstruction of radiometric brightness temperature maps from nonuniform visibility function samples. This method combines the conjugate gradient algorithm with min-max nonuniform FFT approach, which has been shown to provide considerably improved image quality relative to the traditional gridding method. Simulations for SAIRs were performed and showed better image quality in comparison to the traditional frequency interpolation method.     

Pristine or altered: low-Mg calcite shells survived from massive dolomitization? A case study from Miocene carbonates

Low-Mg calcite shells have been widely used to reconstruct the chemistry of ancient seawater. There is always a question: are the shells chemically pristine? This paper presents the isotope and elemental geochemistry of low-Mg calcite bivalve shells in late Miocene platform carbonates, SE Spain. The platform carbonates were extensively dolomitized, and limestone is restricted to older stratal units, and to units mainly in topographically higher and more landward strata. Low-Mg calcite oyster shells were completely dissolved out in the basinward dolomite, but are well preserved in the limestone. These shells appear to retain the original growth microstructures, based on hand samples. Under the microscope, however, dissolution and recrystallization, as well as pristine growth lines are all present. Sr isotopes in these shells range from that of normal Miocene seawater to radiogenic values. δ¹⁸O and δ¹³C values, and Mg, Sr, and Na concentrations in these shells are rather variable. The high end members are consistent with the typical values of modern/late Miocene normal-seawater low-Mg calcite shells, whereas the low end members are close to those of diagenetic calcite cements, which have low δ¹⁸O, δ¹³C, Sr and Na values, and radiogenic Sr. The Nijar shells were altered physically and chemically to different degrees by diagenesis, although these shells are consistent with some “criteria” of unalteration. The isotopic and trace-element data collected in altered and pristine (or less altered) portions coexisting in the same shells are clearly differentiable. Quantitative simulation of covariations of geochemical pairs indicates that solid mixing of unaltered and altered portions by sampling is consistent with the variations in isotopic and elemental data recorded in the Nijar shells. The geological significance of this study is that ancient fabric-retentive calcite shells may have been altered geochemically although they may appear pristine. Calcite shells that underwent intensive diagenesis should be examined rigorously under the microscope, coupled with investigations of multiple geochemical proxies to assess chemical alteration. Only the data of unaltered shells can be used to reconstruct the chemistry of ancient seawater.     

Geochemistry of pore waters from the Xisha Trough, northern South China Sea and their implications for gas hydrates

This paper reports all available geochemical data on sediments and pore waters from the Xisha Trough on the northern continental margin of the South China Sea. The methane concentrations in marine sediments display a downhole increasing trend and their carbon isotopic compositions (δ ¹³C = −25 to −51‰) indicate a thermogenic origin. Pore water Cl⁻ concentrations show a range from 537 to 730 mM, and the high Cl⁻ samples also have higher concentrations of Br⁻, Na⁺, K⁺, and Mg²⁺, implying mixing between normal seawater and brine in the basin. The SO₄ ²⁻ concentrations of pore waters vary from 19.9 to 36.8 mM, and show a downhole decreasing trend. Calculated SMI (sulfate-methane interfaces) depths and sulfate gradients are between 21 and 47 mbsf, and between −0.7 and −1.7 mM/m, respectively, which are similar to values in gas hydrate locations worldwide and suggest a high methane flux in the basin. Overall, the geochemical data, together with geological and geophysical evidence, such as the high sedimentation rates, high organic carbon contents, thick sediment piles, salt and mud diapirs, active faulting, abundant thermogenic gases, and occurrence of huge bottom simulating reflector (BSR), are suggestive of a favorable condition for occurrence of gas hydrates in this region.     

Dissolved inorganic carbon (DIC) and its carbon isotopic composition in sediment pore waters from the Shenhu area,northern South China Sea

The Shenhu area is one of the most favorable places for the occurrence of gas hydrates in the northern continental slope of the South China Sea. Pore water samples were collected in two piston cores (SH-A and SH-B) from this area, and the concentrations of sulfate and dissolved inorganic carbon (DIC) and its carbon isotopic composition were measured. The data revealed large DIC variations and very negative δ ¹³C-DIC values. Two reaction zones, 0–3 mbsf and below 3 mbsf, are identified in the sediment system. At site SH-A, the upper zone (0–3 mbsf) shows relatively constant sulfate and DIC concentrations and δ ¹³C-DIC values, possibly due to bioturbation and fluid advection. The lower zone (below 3 mbsf) displays good linear gradients for sulfate and DIC concentrations, and δ ¹³C-DIC values. At site SH-B, both zones show linear gradients, but the decreasing gradients for δ ¹³C-DIC and SO₄ ²⁻ in the lower zone below 3 mbsf are greater than those from the upper zone, 0–3 mbsf. The calculated sulfate-methane interface (SMI) depths of the two cores are 10.0 m and 11.1 m, respectively. The depth profiles of both DIC and δ ¹³C-DIC showed similar characteristics as those in other gas hydrate locations in the world oceans, such as the Blake Ridge. Overall, our results indicate an anaerobic methane oxidation (AMO) process in the sediments with large methane flux from depth in the studied area, which might be linked to the formation of gas hydrates in this area.     

南麂列岛大沙岙沙滩贝类的时空分布

南麂列岛作为观光旅游的休闲去处正在日益升温,其中沙滩游玩是最大的活动亮点,大沙岙是南麂列岛最具代表性的沙滩,沙滩内生活着较多贝类,随大量人员的涌入和沿岸环境污染的日趋加重,大沙岙沙滩贝类的栖息地环境受到了较大程度的危害、人为活动正影响着贝类的生长发育。为探明近年来大沙岙贝类种类、数量及群落结构的变化,在南麂列岛国家海洋自然保护区建立初期(1992年)生态调查的基础上,于2003年再次对大沙岙贝类进行了采样分析,结果表明:大沙岙沙滩12种贝类的平均生物量和栖息密度分别为30.16g/m2和20个/m2,北断面开放区贝类的平均生物量和栖息密度(13.98g/m2和11个/m2)明显少于受监控的南断面核心区(46.33g/m2和30个/m2),贝类的平均生物量和栖息密度的垂直分布低潮区(48.43g/m2和31个/m2)高于中潮区(28.03g/m2和20个/m2),贝类的平均栖息密度7月高于3月,北断面贝类的季节变化、多样性和均匀度指数大于南断面。与建区初期同季调查资料比对发现,2003年北断面贝类数量下降幅度(14倍)显著大于南断面贝类下降幅度(1倍)。分析认为,自然环境变化和人为采捕是影响沙滩贝类数量下降的主要外部因子。     

海洋溢油污染对生物群落和种群的影响及生态系统的恢复

海洋溢油污染带来的最严重的威胁在于它能够改变或破坏海洋环境中正常存在的生态系统。溢油污染对生态系统的初步影响是造成生物物种多样性、丰度、均匀度下降,进一步则是敏感物种消退,另一些机会物种大量繁殖,群落结构受到扰动。受到溢油污染后的生物群落的变化和恢复过程通常呈现的是多种因素共同作用的结果。溢油作为一种外来的扰动因素,对生态系统的发展强行加注了一种相对统一的发展模式,生态系统会经历一些优势种之间强烈的相互作用,种群数量出现大幅度的波动,系统变得敏感脆弱,生态恢复需要一定的时间。本文对国内外几十年来的研究成果进行综述,总结今后应大力开展海洋石油污染调查研究工作的各个方面。     

Cr^3＋在改善三元复合驱中的作用实验研究

在三元复合驱矿场应用实践中,由于三元复合体系自身流度控制能力的局限性,必须通过聚合物凝胶前置段塞来改善吸液剖面,这就涉及到聚合物凝胶与三元复合体系的配伍性。通过向三元复合体系中加入有机铬,考察Cr^3＋对三元复合体系黏度、界面张力和阻力系数等性能影响,进而对Cr^3＋聚合物凝胶与三元复合体系配伍性以及Cr^3＋在改善三元复合体系性能方面的作用做出评价。结果表明,Cr^3＋的加入对三元复合体系黏度和界面张力影响不大,但阻力系数和残余阻力系数却明显增加。当采用Cr^3＋聚合物凝胶作为前置段塞或采用添加Cr^3＋的三元复合体系进行复合驱油实验时,其采收率增加幅度都要高于普通三元复合驱。这不仅显示出Cr^3＋聚合物凝胶与三元复合体系间良好的配伍性,而且为改善三元复合驱增油效果提供了新的途径。