L波段碳湿敏元件特性试验

目前国内大部分探空站已经启用新一代探空仪——上海长望气象科技有限公司生产的L波段电子探空仪。新探空仪的数据率、测量准确度和可靠性都有较大的提高。新探空仪使用的湿度敏感元件是碳湿敏电阻。我们利用工厂添置的能测到-30℃低温的高精度湿度校准设备，进行了大量静态测试，进一步验证了碳湿敏元件与老探空仪使用的肠衣敏感元件相比，灵敏度高，滞后小，在高空低温期间感应陕，测量准确度有较大提高。     

地震资料解释中的误区与科学思维

地震资料解释是地震勘探的核心环节,但地震资料解释人员一些认识上误区在一定程度上制约了着它的发展。通过实例,介绍了当前的资料解释人员存在的七种主要误区,并分别对这些认识误区进行了深入的分析,探讨其错误实质及危害,以帮助资料解释人员树立一种地震资料解释的科学思维,提高地震资料解释水平。     

神农架大九湖15.753kaB.P.以来的孢粉记录和环境演变*

根据对大九湖297cm厚的泥炭地层10个AMS ¹⁴ C年龄的测定以及148块孢粉样品的分析,发现每块样品的孢粉(浓度)含量都很高,植物种类繁多,分属于137(科)属,可划分为6个孢粉组合带,植被类型演替大体为:含少量常绿树种的针阔叶混交林—含常绿阔叶树种的落叶阔叶林—常绿落叶阔叶林—含常绿阔叶树种的落叶阔叶林—含少量常绿树种的针阔叶混交林。孢粉带Ⅰ(15.753~11.280kaB.P.)记录了该区域晚冰期及其向全新世过渡时期冷暖波动频繁的气候条件,其中亚带Ⅰ -1(15.753~15.549kaB.P.),Ⅰ -3(14.936~14.505kaB.P.)和Ⅰ -5(12.655~11.280kaB.P.)可能分别对应最老仙女木期、老仙女木和新仙女木冷期,而亚带Ⅰ -2(15.549~14.936kaB.P.)和Ⅰ -4(14.505~12.655kaB.P.)分别对应博令和阿勒罗德暖期。孢粉带Ⅱ(11.280~9.218kaB.P.)代表了由晚冰期冷湿气候向全新世温暖气候转换的早全新世缓慢升温的过渡时期。孢粉带Ⅲ(9.218~7.530kaB.P.)代表中全新世前期的气温波动上升期,7.7kaB.P.前后达到最高温。孢粉带Ⅳ(7.530~4.051kaB.P.)代表中全新世适宜期,水热配置条件最佳。孢粉带Ⅴ(4.051~0.911kaB.P.)体现晚全新世温干的气候。孢粉带Ⅵ(0.911~0kaB.P)反映了大九湖温凉稍湿的气候。     

三门峡新一代天气雷达冰雹回波特征分析

利用三门峡新一代天气雷达资料，分析了冰雹天气时雷达产品的特征，并确定冰雹天气预报指标。     

新安县自动气象站报文传输质量分析

根据新安县自动站报文传输情况，分析了影响传输质量的因子，并提出提高报文传输质量的措施。     

北极苔原和海冰地区边界层物理过程观测研究

国家自然科学基金重点项目"北极苔原和海冰地区边界层物理过程的观测研究",通过了国家自然科学基金委员会地球科学部组织的专家组的质疑、答辩和验收.     

安哥拉下刚果盆地吉拉索尔深水油田

吉拉索尔油田位于西非安哥拉17号深水区块,水深1200～1400m,距安哥拉海岸150km。1996年发现,2001年产油,是安哥拉投入开发的第一个深水油田。油田面积约140km2,地质储量约为15.5×108bbl,可采储量约7.25×108bbl,为轻质油。油田所在的下刚果盆地主要经历了裂谷期、过渡期和热沉降期三个阶段的构造演化,相应沉积了裂谷期陆相地层、过渡期蒸发岩层和热沉降期海相地层。主要烃源岩为下白垩统Bucomazi组湖相页岩,有机质丰度高,类型好,成熟度适中,为很好的烃源岩。盆地深水区主要储层为上渐新统—中新统河道充填浊积砂岩复合体,砂岩固结差,物性良好。吉拉索尔油田主要由几个河道浊积砂岩复合体叠置组成,其中夹几个薄层席状砂岩,复合体之间被海相泥页岩分隔。上覆第三系泥岩为其主要盖层。     

煤层气定向井的施工工艺

沁煤盆地郑庄区煤层气井设计为丛式定向井，井身结构设计为直井段、造斜段、稳斜段。其中丛式井直井段设计为二开结构。在不同井段采用不同钻具组合，钻进参数及成井工艺也各不相同。在钻进过程中，为最大限度地发挥煤层气的开采效果，全孔采用清水作为钻井液，并使用了有线随钻测量系统和大功率钻探设备，钻进效果明显，全孔满足设计要求。     

哈萨克斯坦地震地下流体监测、预测的现状及其震兆异常特征的分析

40多年来,哈萨克斯坦地震地下流体观测台网历经初期建网、系统清理、政策调整和优化提高4个阶段,目前已形成与中国北京地区流体监测网相当的规模。分析了哈萨克斯坦流体监测台网的地位、台站分布、观测项目、仪器配置及地震分析预测情况。最后,分析了哈萨克斯坦地震地下流体观测资料的特点,并就哈萨克斯坦流体交换资料的震兆异常特征进行了初步总结。     

Collision leading to multiple-stage large-scale extrusion in the Qinling orogen: Insights from the Mianlue suture

The geologic framework of the Phanerozoic Qinling–Dabie orogen was built up through two major suturing events of three blocks. From north to south these include the North China craton (including the north Qinling block), the Qinling–Dabie microblock, and the South China craton (including the Bikou block), separated by the Shangdan and Mianlue sutures. The Mianlue suture zone contains evidence for Mesozoic extrusion tectonics in the form of major strike–slip border faults surrounding basement blocks, a Late Paleozoic ophiolite and a ca. 240–200 Ma thrust belt that reformed by 200–150 Ma thrusts during A-type (intracontinental) subduction. The regional map pattern shows that the blocks are surrounded by complexly deformed Devonian to Early Triassic metasandstones and metapelites, forming a regional-scale block-in-matrix mélange fabric. Five distinct tectonic units have been recognized in the belt: (1) basement blocks including two types of Precambrian basement, crystalline and transitional; (2) continental margin slices including Early Paleozoic strata, and Late Paleozoic fluviodeltaic sedimentary rocks, proximal and distal fan clastics, reflecting the development of a north-facing rift margin on the edge of the South China plate; (3) out of sequence oceanic crustal slices including strongly deformed postrift, deep-water sedimentary rocks, sheeted dikes, basalts, and mafic–ultramafic cumulates of a Late Paleozoic ophiolite suite, developing independent of the rift margin in a separate basin; (4) out-of-sequence island-arc slices; (5) accretionary wedge slices. All the tectonic units were deformed during three geometrically distinct deformation episodes (D₁, D₂ and D₃ during 240–200 Ma). Units 2–4 involved southward thrusting and vertical then southward extrusion of about 20 km of horizontal displacement above the autochthonous basement during the D₁ episode. Thrust slices 20 km south of the Mianlue suture are related to this vertical extrusion due to the same rock assemblages, ages and kinematics. The D₂ and D₃ episodes folded all the units in a thick-skinned style about east–west (D₂) and west–northwest (D₃) axes in the Mianlue suture zone. An early foreland propagating sequence of accretion of Late Paleozoic rocks deposited above the Yangtze craton is not involved in D₁ deformation but is temporally equivalent to the D₂ and D₃ deformation in the Mianlue suture. Two stages of strike–slip faulting mainly occurred at the end of D₂ and D₃, respectively. During D₂ deformation, the Bikou block was obliquely indented to the ESE into the Mianlue suture, rather than being thrust over the Mianlue suture from the north as a part of the Qinling–Dabie microblock. During D₃ deformation, however, the Bikou block was bounded by the south boundary fault of the Mianlue suture, and the Yangpingguan fault on the south. These faults are coeval strike–slip faults, but of opposite senses, and accommodated minor southwestward extrusion of the Bikou block into Songpan–Ganze orogen. The other basement blocks north of the Mianlue suture were extruded eastward by about 20 km of lateral displacement, based on the offset of the Wudang dome, during the D₃ episode due to the northeastward indentation of the Hannan complex of the South China craton. Post-D₃ emplacement of granite, cutting across the strike–slip faults such as the Mianlue suture, provides a minimum age of 200 Ma for D₃ deformation. Therefore, based on insights from the evolution of the Mianlue suture, the D₂ and D₃ episodes in the Mianlue suture and its neighbors are not responsible for and associated with the two-stage extrusion of the Dabie UHP-HP terranes from the Foping dome to the present erosional surface (more than 350 km).