Nonlinear dynamics of gravity flows in sloping channels

Doklady Earth Sciences -     

Reconstructing historic Glacial Lake Outburst Floods through numerical modelling and geomorphological assessment: Extreme events in the Himalaya

Recession of high‐mountain glaciers in response to climatic change frequently results in the development of moraine‐dammed glacial lakes. Moraine dam failure is often accompanied by the release of large volumes of water and sediment, termed a Glacial Lake Outburst Flood (GLOF). Chukhung Glacier is a small (~3 km²) receding valley glacier in Mt. Everest (Sagarmatha) National Park, Nepal. Unlike many Himalayan glaciers, which possess a thick mantle of supraglacial debris, its surface is relatively clean. The glacier terminus has receded 1.3 km from its maximum Holocene position, and in doing so provided the space for an ice‐contact moraine‐dammed lake to develop. The lake had a maximum volume of 5.5 × 10⁵ m³ and drained as a result of breaching of the terminal moraine. An estimated 1.3 × 10⁵ m³ of material was removed from the terminal moraine during breach development. Numerical dam‐breach modelling, implemented within a Generalised Likelihood Uncertainty Estimation (GLUE) framework, was used to investigate a range of moraine‐dam failure scenarios. Reconstructed outflow peak discharges, including failure via overtopping and piping mechanisms, are in the range 146–2200 m³ s^‐1. Results from two‐dimensional hydrodynamic GLOF modelling indicate that maximum local flow depths may have exceeded 9 m, with maximum flow velocities exceeding 20 m s^‐1 within 700 m of the breach. The floodwaters mobilised a significant amount of material, sourced mostly from the expanding breach, forming a 300 m long and 100 m wide debris fan originating at the breach exit. moraine‐dam. These results also suggest that inundation of the entire floodplain may have been achieved within ten minutes of initial breach development, suggesting that debris fan development was rapid. We discuss the key glaciological and geomorphological factors that have determined the evolution of a hazardous moraine‐dammed lake complex and the subsequent generation of a GLOF and its geomorphological impact. © 2014 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.     

Geochemical processes controlling the spatial distribution of selenium in soil and water,west central South Dakota,USA

Selenium (Se) is essential in the human diet, but has a low threshold for toxic concentration. It is recommended that nutrients such as Se should be consumed through foods as part of a normal diet. Se concentrations in crops and meat depend on the amount of labile Se in the soil where crops and forage are grown. Therefore, managing agriculture for optimal Se in grain crops and forage requires an understanding of the distribution and mobility of Se. Elevated concentrations of Se occur in waters, soils, and forage 120 km west of Pierre in west central South Dakota, USA. The research site lies in an elevated, dissected plain where soils developed on gently dipping Pierre Shale. Soils were sampled along catena transects and waters collected from soil, ponds, and shallow borings in areas of known elevated forage and crop Se. Soil extracts from saturated-paste extraction and acid (aqua regia and hydrofluoric acid) extraction were analyzed. Selenate was the dominant Se species in both acid and saturated-paste extracts; selenite and organic Se were below detection (<0.2 ppb) in the same soil extracts. On average, 98% of soil Se was not water-soluble. The distribution of total Se shows much less spatial variation than water-soluble Se in the areas sampled. Se shows correlation with organic carbon in soils and waters, suggesting its association with organic carbon. Ca shows some correlation to Se in acid extracts, but not in saturated-paste extracts or in waters. Total Se shows no significant correlation to Na, Mg, and total S in the soils. Se in saturated-paste extracts and water samples shows good correlations with Na, Mg, and SO₄, suggesting that evaporitic Na–Mg–sulfate minerals may temporarily concentrate water-soluble Se in shallow soils. The dissolution and precipitation of these Na–Mg–sulfate salts together with pH and oxidation–reduction conditions apparently control water-soluble Se distribution and mobilization in shallow subsurface environments.     

Recognition of the Cambrian Timan–Severnaya Zemlya orogen and timing of geological evolution of the North Kara sedimentary basin based on detrital zircon dating

New data on the ages of detrital zircons from folded basement rocks and cover sediments of the Severnaya Zemlya archipelago and Izvestiy TSIK islands have been obtained. The basement age is defined as Cambrian (pre-Ordovician). The Ordovician and Silurian sandstones were mainly formed by erosion of the basement rocks. The Devonian sandstones were formed by debris sourced from the Caledonian orogen. The Carboniferous–Early Permian molasse was formed simultaneously with the erosion of the Carboniferous granitoids and weathering of the Ordovician volcanic arc rocks and the Cambrian basement. The North Kara basin was formed in the Ordovician as a back-arc basin. It experienced its main compression deformations at the boundary of the Devonian and Carboniferous and in the Carboniferous.     

Development and verification of the comprehensive model for physical properties of hydrate sediment

Natural gas hydrate is widely distributed all over the world and may be a potential resource in the near future, whereas hydrate dissociation during the development affects wellbore stability and drilling safety. However, the present modeling of hydrate reservoir parameters ignored the influence of effective stress and only considered the hydrate saturation. In this paper, a series of stress sensitivity experiments for the unconsolidated sandstone were carried out, and the influence of mean effective stress on physical parameters was obtained; a comprehensive model for the physical parameters of hydrate reservoir was developed subsequently. With the help of ABAQUS finite element software, the established comprehensive model was verified by the use of the wellbore stability numerical model of hydrate reservoir. The verification results show that ignoring the effect of mean effective stress on the parameters of hydrate formation aggravates the invasion of drilling fluid into the hydrate formation. Besides, ignoring the stress sensitivity of reservoir physical parameters will underestimate the wellbore instability during hydrate drilling, which will be a threat to the safety of gas hydrate drilling. At the end of the drilling operation, the maximum plastic strain of the model for considering and not considering stress sensitivity was 0.0145 and 0.0138, respectively. Therefore, the established comprehensive model will provide a theoretical support for accurately predicting the engineering geological disasters in hydrate development process.     

The determination of present and possible environmental risks in solid waste dumping site,Tunceli, Turkey

Leachate was a major cause of high risk classification. This landfill was set as one with highest possible risk classification due to high vulnerability of private water wells to contamination from leachate flows. The aim of this study is to determine the present and possible environmental risks of the leachate spreading from solid waste dumping site in Tunceli and offer solutions for those determined environmental risks. For this purpose, the characteristics of the leachate were monitored at two station points detected in the solid waste dumping site for 7 months. The characteristics of the leachate were found for pH between 7.9 and 8.7. Oxidation reduction potential (ORP) occurred between ??143 and ??48 mV while conductivity was between 2.8 and 2.6 mS. Total solid matter (TSM) and suspended solid matter (SSM) were between 1000 and 7000 mg/l, 0.2–22.5 mg/l, respectively, while total volatile solids (TVS) occurred between 300 and 1800 mg/l for the two stations. Alkalinity was approximately between 290 and 5210 mg/l, while biological oxygen demand (BOD₅) and chemical oxygen demand (COD) results were 15–606 mg/l and 60–1160 mg/l, respectively, for two stations in all sampling time. In both stations, orthophosphate, ammonium nitrogen, nitrate, sulfate, and chloride analyses stayed between 3.04 and 921.1 mg/l; 0.29–619.36 mg/l; 8.94–135.04 mg/l; 125.9–1360.9 mg/l and 99.9–1249.9 mg/l, respectively, in 6 months. As a result of the characterization studies obtained from the leachate, it was found that the amounts of water entering into the waste mass and the retention period of the water in the mass were very effective in the temporal character change of the leachate. According to the Discharge Standards for Solid Waste Assessment and Disposal Facilities and Discharge to Waste Water Infrastructure Facilities of waste management regulation, the results were found to be risky. Consequently, the site in question needs to be urgently rehabilitated when considering the environmental risks of the leachate spreading from the site.     

Atmospheric Correction Over Coastal Turbid Waters of Bay of Bengal Using OCEANSAT-I Ocean Colour Monitor (OCM) Data

Space-borne ocean-colour remote sensor-detected radiance is heavily contaminated by solar radiation backscattered by the atmospheric air molecules and aerosols. Hence, the first step in ocean-colour data processing is the removal of this atmospheric contribution from the sensor-detected radiance to enable detection of optically active oceanic constituents e.g. chlorophyll-a, suspended sediment etc. In standard atmospheric correction procedure for OCEANSAT-1 Ocean Colour Monitor (OCM) data, NIR bands centered at 765 and 865 nm wavelengths were used for aerosol characterization. Due to high absorption by water molecules, ocean surface in these two wavelengths acts as dark background, therefore, sensor detected radiance can be assumed to have major contribution from atmospheric scattering. For coastal turbid waters this assumption of dark surface fails due to the presence of highly scattering sediments which causes sufficient water-leaving radiance in NIR bands and lead to over-estimation of aerosol radiance resulting in negative water leaving radiance for λ < 700 nm. In the present study, for the turbid coastal waters in the northern Bay of Bengal, the concept of spatial homogeneity of aerosol and water leaving reflectance has been applied to perform atmospheric correction of OCAEANSAT-1 OCM data. The results of the turbid water atmospheric correction have also been validated using in-situ measured water-leaving radiance. Comparison of satellite derived water-leaving radiance for five coastal stations with in-situ measured radiance spectra, indicates an improvement over the standard atmospheric correction algorithm giving physically realistic and positive values. Root Mean Square Error (RMSE) between the in-situ measured and satellite derived water leaving radiance for wavelengths 412 nm, 443 nm, 490 nm, 512 nm and 555 nm was found to be 1.11, 0.718, 0.575, 0.611 and 0.651%, respectively, using standard atmospheric correction procedure. By the use of spatial homogeneity concept, this error was reduced to 0.125, 0.173, 0.176, 0.225, and 0.290 and the correlation coefficient arrived at 0.945, which is an improvement over the standard atmospheric correction procedure.