Formation of the Upper Pleistocene terraces of Lake Van (Turkey)

Sedimentological and geomorphological studies of terraces around Lake Van (1647 m) provided a preliminary framework for lake‐level variations. The elevations of terraces and past lake level were measured with a differential global positioning system. A chronology is developed using ²³⁴U/²³⁰Th dating of travertines, ³⁹Ar/⁴⁰Ar dating of pyroclastites and ¹⁴C dating of organic matter. Facies and stratigraphic correlations identify four transgressions (C1′, C1″, C2′ and C2″), each followed by a regression which ended with low lake levels that caused river incision and terrace formation. Evidence of the oldest transgression (C1′) is found in the uppermost reaches of valleys up to 1755 m, an altitude higher than the present lake threshold (1736 m). This C1′ transgression may be related to pyroclastic flows which dammed an outlet located in the western part of the lake basin and which is dated to before 105 ka. After 100 ka, a second transgression (C1″) reached 1730/1735 m, possibly related to a younger ignimbrite flow, in association with high water inflow (warm and/or wetter conditions). The two younger transgressions reached 1700–1705 m. The first one (C2′) is dated to 26–24.5 cal. ka BP and the second one (C2″) to 21–20 cal. ka BP. Available data suggest that the long‐term lake‐level changes responded mainly to climate oscillations. Additional events such as river captures caused by volcanic falls filling valleys, tectonism, erosion and karstic diversion may have impacted these long‐term lake‐level changes. Copyright © 2010 John Wiley & Sons, Ltd.     

Institutional design propositions for the governance of adaptation to climate change in the water sector

This paper provides an evidence-based contribution to understanding processes of climate change adaptation in water governance systems in the Netherlands, Australia and South Africa. It builds upon the work of Ostrom on institutional design principles for local common pool resources systems. We argue that for dealing with complexities and uncertainties related to climate change impacts (e.g. increased frequency and intensity of floods or droughts) additional or adjusted institutional design propositions are necessary that facilitate learning processes. This is especially the case for dealing with complex, cross-boundary and large-scale resource systems, such as river basins and delta areas in the Netherlands and South Africa or groundwater systems in Western Australia. In this paper we provide empirical support for a set of eight refined and extended institutional design propositions for the governance of adaptation to climate change in the water sector. Together they capture structural, agency and learning dimensions of the adaptation challenge and they provide a strong initial framework to explore key institutional issues in the governance of adaptation to climate change. These institutional design propositions support a “management as learning” approach to dealing with complexity and uncertainty. They do not specify blueprints, but encourage adaptation tuned to the specific features of local geography, ecology, economies and cultures.     

Détection des transitions lithologiques par l'analyse de la composante fractale des diagraphies par transformée continue en ondelettes

The frequency analysis of many log data permits to verify that their stochastic component show ‘power-law-type’ spectral densities, characteristic of $1/f$ noise. They can be modelled by fractional Brownian motions. Continuous Wavelet Transformation (CWT) provides us with very efficient methods to determine the local spectral exponents of these scaling laws. These new attributes are related to the local fractality of these signals. We first present some theoretical results and an application to a fractional Brownian motion. The second application concerns a dataset recorded in the MAR203 borehole. We show that clustering of these new pseudo-logs leads to a good resolution between different lithofacies. To cite this article: N. Zaourar et al., C. R. Geoscience 338 (2006).     

The SEASWAB experiment

Abstract

SEASWAB is one element of the Delta Project of the U.S. Geological Survey, a cooperative effort with several universities and other governmental agencies to investigate the processes that cause marine‐sediment instability. The basic purpose of the SEASWAB experiment was to obtain field measurements of sediment motion and pore‐pressure variations in soft sediment affected by wave‐pressure perturbations. This article serves as an introduction to the six papers that follow and that together make up a report on the results of SEASWAB.     

The identified origin of a linear slope near Chi–Chi earthquake rupture combining 2D, 3D resistivity image profiling and geological data

A slope on the west border of the foothill near 921 surface rupture (caused by the 1999 Chi-Chi earthquake) in central Taiwan shows distinctive topographic expression that was prone to be considered as a fault scarp formed by a preexisting active fault. The 2D and 3D resistivity images clearly delineate rock surfaces which show steep, deep, gentle, and subvertical displacement beneath the slope, the toe of slope, the non-lateritic terrace, and 921 surface rupture, respectively, which can be attributed to the significant contrast of resistivity between gravel and rock. The horizontal sand bed and clast-supported gravel were deposited in a fluvial environment, whereas wedge-shaped gravel and colluvium were scarp-induced colluvial deposits in the trench profile. The layers shown in the depth of excavation, except for rock, has no offset or disturbance by fault ever since at least 2,480 ± 50 year B.P., based on carbon 14 dating of charcoal sample at the bottom of trench profile. According to information from two boreholes close to the slope, an over 20-m-thick marker bed with transported shell fragments, was found for correlation. This correlation further implies the slope was not formed by fault. On the other hand, two boreholes which are far from the slope and located on the flat non-lateritic terrace frequently show fractured and sheared features. By comparison, the locations around these two boreholes indicate a reverse fault or faults that occurred before the deposition of gravel. Later on, the paleostream was developed along the foot of fault scarp that was subjected to erosion and led to subsequent retrogression or retreat of the slope. Consequently, the incision of paleostream is believed to be responsible for the high relief of rock surface around the slope. Furthermore, from resistivity and borehole data, the rock surface underlying terrace is gentle where no faults occur after the deposition of gravel. The result of RIP crossing the 921 surface rupture displays about 10 m difference in elevation of rock surface on both sides, which is greater than that of 3–4 m caused by Chi-Chi earthquake. This indicates that the 921 surface rupture is a preexisting thrust fault that resulted from several thrusting events since terrace gravel was deposited. So it is not necessary to establish an extra restricted zone for construction in study area, except close to the 921 surface rupture.     

Stoichiometry of a dissolution reaction of a trioctahedral vermiculite at pH 2.7

Transformation of vermiculite to hydroxy-interlayered vermiculites (HIV) significantly modifies the physicochemical properties of the original mineral. HIV is a common phase in acid soils, nevertheless its formation remains poorly understood. The main goal of this paper was to clarify the kinetics and process of interlayer aluminization of pure vermiculite using an experimental design. For this purpose, we monitored the dissolution of Na-saturated vermiculite in dilute HCL at pH 2.7, at 50 °C for 672 h in stirred flow-through reactors. Both reacted samples at different dissolution steps, and the leaching of elements, were investigated. The main result was a rapid change to hydroxy-interlayered vermiculite, with a decrease in CEC and a progressive displacement of d(0 0 1) reflection near 1.4 nm after K saturation, resulting from formation of hydroxy-interlayer material. Vermiculite was found to dissolve non-stoichiometrically for 500 h; after that, the release rate for Si, Mg and Al became stoichiometric with respect to vermiculite chemistry. By contrast, Fe sustained non-stoichiometric release throughout the whole experiment. At the steady state, i.e., after 500 h, a dissolution rate of 8.8 ± 0.1 × 10⁻¹¹ mol vermiculite m⁻² s⁻¹ was found with respect to Si. Both Al and Fe precipitated in the interlayer space, and their amounts calculated at the end of the experiment were 3.74 × 10⁻⁴ mol g⁻¹ of vermiculite for Al and 8.74 × 10⁻⁵ for Fe. The rate of interlayer aluminization increased for 60 h and then regularly decreased. Al-interlayering stopped after 288 h, but Fe still precipitated in the interlayer space.A comparison with the same mineral incubated for three years in acid soils revealed that the reaction was proton-promoted. The same pattern of CEC decrease and interlayer aluminization was observed, but the kinetics were slower due to soil environmental conditions.     

Sr isotopes as a tracer of weathering processes and dust inputs in a tropical granitoid watershed, Luquillo Mountains, Puerto Rico

Sr isotope data from soils, water, and atmospheric inputs in a small tropical granitoid watershed in the Luquillo Mountains of Puerto Rico constrain soil mineral development, weathering fluxes, and atmospheric deposition. This study provides new information on pedogenic processes and geochemical fluxes that is not apparent in watershed mass balances based on major elements alone. ⁸⁷Sr/⁸⁶Sr data reveal that Saharan mineral aerosol dust contributes significantly to atmospheric inputs. Watershed-scale Sr isotope mass balance calculations indicate that the dust deposition flux for the watershed is 2100 ± 700 mg cm⁻² ka⁻¹. Nd isotope analyses of soil and saprolite samples provide independent evidence for the presence of Saharan dust in the regolith. Watershed-scale Sr isotope mass balance calculations are used to calculate the overall short-term chemical denudation velocity for the watershed, which agrees well with previous denudation rate estimates based on major element chemistry and cosmogenic nuclides. The dissolved streamwater Sr flux is dominated by weathering of plagioclase and hornblende and partial weathering of biotite in the saprock zone. A steep gradient in regolith porewater ⁸⁷Sr/⁸⁶Sr ratio with depth, from 0.70635 to as high as 0.71395, reflects the transition from primary mineral-derived Sr to a combination of residual biotite-derived Sr and atmospherically-derived Sr near the surface, and allows multiple origins of kaolinite to be identified.     

Dynamics of Sunspot Light Bridges as Revealed by High-Resolution Images from <Emphasis Type="Italic">Hinode</Emphasis>

We present G-band and Ca ii H filtergrams of two sunspot light bridges in NOAA AR 10953 taken from the 50-cm Solar Optical Telescope onboard the Japanese space satellite Hinode on 1 May 2007. The two light bridges differ in structure, with one of them resembling the filamentary penumbra and the other possessing a dark central lane running along the axis of the bridge having a width of 170 km, which is close to the diffraction limit of the telescope. Velocity measurements of the light bridges using proper motion displacements of inhomogeneities, averaged over the entire time series, show a nonuniform flow with velocities peaking at 250 and 180 m s⁻¹ for the two bridges, respectively. We report observations of an archlike structure over one of the light bridges in the Ca images. Brightness enhancements are seen traveling along this arch as well as along the light bridge. Observations suggest that these enhancements over light bridges could possibly be a signature of lower chromospheric heating.     

On hurricane energy

Warm seawater is the energy source for hurricanes. Interfacial sea-to-air heat transfer without spray ranges from 100?W?m^?2 in light wind to 1,000?W?m^?2 in hurricane force wind. Spray can increase sea-to-air heat transfer by two orders of magnitude and result in heat transfers of up to 100,000?W?m^?2. Drops of spray falling back in the sea can be 2–4?°C colder than the drops leaving the sea, thus transferring a large quantity of heat from sea to air. The heat of evaporation is taken from the sensible heat of the remainder of the drop; evaporating approximately 0.3?% of a drop is sufficient to reduce its temperature to the wet bulb temperature of the air. The heat required to evaporate hurricane precipitation is roughly equal to the heat removed from the sea indicating that sea cooling is due to heat removal from above and not to the mixing of cold water from below. The paper shows how case studies of ideal thermodynamic processes can help explain hurricane intensity.