Push-pull tests for assessing in situ aerobic cometabolism

Three types of single-well push-pull tests were developed for use in assessing the feasibility of in situ aerobic cometabolism of chlorinated aliphatic hydrocarbons (CAHs). These included transport tests, biostimulation tests, and activity tests. Transport tests are conducted to evaluate the mobility of solutes used in subsequent tests. These included bromide or chloride (conservative tracers), propane (growth substrate), ethylene, propylene (CAH surrogates), dissolved oxygen (electron acceptor), and nitrate (a minor nutrient). Tests were conducted at an experimental wellfield of Oregon State University. At this site, extraction phase breakthrough curves for all solutes were similar, indicating apparent conservative transport of the dissolved gases and nitrate prior to biostimulation. Biostimulation tests were conducted to stimulate propane-utilizing activity of indigenous microorganisms and consisted of sequential injections of site ground water containing dissolved propane and oxygen. Biostimulation was detected by the increase in rates of propane and oxygen utilization after each injection. Activity tests were conducted to quantify rates of substrate utilization and to confirm that CAH-transforming activity had likely been stimulated. In particular, the transformation of injected CAH surrogates ethylene and propylene to the cometabolic byproducts ethylene oxide and propylene oxide provided evidence that activity of the monooxygenase enzyme system, responsible for aerobic cometabolic transformations of CAHs, had likely also been stimulated. Estimated zero-order transformation rates decreased in the order propane > ethylene > propylene. The series of push-pull tests developed and field tested in this study should prove useful for conducting rapid, low-cost feasibility assessments for in situ aerobic cometabolism of CAHs.     

Cytochrome P4501A expression,chemical contaminants and histopathology in roach,goby and sturgeon and chemical contaminants in sediments from the Caspian Sea,Lake Balkhash and the Ily River Delta,Kazakhstan

Roach, goby and sturgeon were examined for cytochrome P4501A (CYP1A) expression and histopathology, in relation to contaminant burdens in fish and sediment. Gradients of induction of CYP1A were observed. Roach from the Ural and Ily River Deltas and roach and goby from the two stations nearest the Caspian Sea oil fields displayed higher levels of CYP1A expression in several organs than was observed in fish from further offshore. Great sturgeon and Russian sturgeon showed higher levels of CYP1A expression than was seen in starred sturgeon and gobies in the Ural delta. No fish showed evidence of contaminant-related histopathologies in the organs examined, despite the elevated CYP1A levels. Low levels of polychlorinated biphenyls and elevated levels of inshore and riverine petroleum hydrocarbons from these habitats suggest that this ongoing hydrocarbon exposure, and that from natural sources and long-term oil exploration on the Northeastern Caspian shore, contributed to the CYP1A induction observed.     

Synrift stratigraphic geometry in a transfer zone coarse-grained delta complex, Miocene Pohang Basin, SE Korea

The Gojusan fan delta is a coarse‐grained delta complex on the western margin of the Miocene Pohang Basin, SE Korea. The deposits consist of five facies associations (FA): alluvial‐fan conglomerates (FA I), shallow‐marine mouth‐bar sandstones (FA II), fluvial and mouth‐bar conglomerates (FA III), Gilbert‐type foreset conglomerates (FA IV) and hemipelagic mudstones (FA V). Different facies associations characterize the northern, central and southern parts of the delta complex. To the north, FA IV is laterally juxtaposed with FA I or the basement, with scarp‐derived breccias along the contact. Centrally, and to the south, FA I is laterally juxtaposed with FA II, with an abrupt facies change and local inliers of basement rocks along the contact. Early alluvial fan and mouth‐bar deposits are overlain by the topset (FA III) and truncated by the foreset (FA IV) of a Gilbert‐type delta in the central part of the fan delta complex, whereas FA II passes transitionally upward into FA III in the south, with the latter extending basinward into a gently inclined shoal water delta front. Gilbert‐type and shoal‐water geometries are therefore developed in the same delta complex. The composite delta geometry is interpreted as reflecting (1) its development near an extensional transfer zone where the hangingwall relief was variable over short distances along strike, and (2) the operation of intrabasinal faults. This interpretation contrasts with previous studies that viewed the delta complex as having formed along a pull‐apart basin margin.     

Fusion of multispectral and panchromatic Satellite images using the curvelet transform

A useful technique in various applications of remote sensing involves the fusion of different types of satellite images, namely multispectral (MS) satellite images with a high spectral and low spatial resolution and panchromatic (Pan) satellite image with a low spectral and high spatial resolution. Recent studies show that wavelet-based image fusion provides high-quality spectral content in fused images. However, the results of most wavelet-based methods of image fusion have a spatial resolution that is less than that obtained via the Brovey, intensity-hue-saturation, and principal components analysis methods of image fusion. We introduce an improved method of image fusion which is based on the amelioration de la resolution spatiale par injection de structures (ARSIS) concept using the curvelet transform, because the curvelet transform represents edges better than wavelets. Because edges are fundamental in image representation, enhancing the edges is an effective means of enhancing spatial resolution. Curvelet-based image fusion has been used to merge a Landsat Enhanced Thematic Mapper Plus Pan and MS image. The proposed method simultaneously provides richer information in the spatial and spectral domains.     

Seasonal trend of particulate PAHs at Gosan, a background site in Korea between 2001 and 2002 and major factors affecting their levels

The concentrations of particulate Polycyclic aromatic hydrocarbons (PAHs) were measured at Gosan, a background site in Korea for 1 year between November 2001 and November 2002. The total concentrations of 14 PAH compounds at Gosan were between 0.52 and 14.76 ng m^− 3 and about 3–15 times higher than those at other rural or remote sites in the world. Seasonal trend was observed for particulate PAHs concentrations at Gosan with higher levels during heating season due to increased fossil fuel usage and the movement of air parcels from Asian continent. Principal component factor analysis (PCF) for PAHs showed three factors; combination of coal combustion and vehicular emission, natural gas combustion, and unidentified one. However, PCF for the combined data of PAHs, inorganic ions, and elements revealed that the unidentified factor consists of crustal species, sea salts, and four PAH compounds. Thus, this factor is thought to be transport of crustal species with organics from combustion sources. The major variables which determine the sources of PAHs are the heating season and the movement of air parcels from Asian continent.     

Fracture Toughness Measurements and Acoustic Emission Activity in Brittle Rocks

Fracture toughness measurements under static loading conditions have been carried out in Barre and Lac du Bonnet granites. An advanced AE technique has been adopted to monitor real-time crack initiation and propagation around the principal crack in these tests to understand the processes of brittle failure under tension and related characteristics of the resulting fracture process zone. The anisotropy of Mode I fracture toughness has been investigated along specific directions. Microcrack density and orientation analysis from thin section studies have shown these characteristics to be the primary cause of the observed variation in fracture toughness, which is seen to vary between 1.14 MPa.(m)^1/2 and 1.89 MPa.(m)^1/2 in Barre granite. The latter value represents the case in which the crack is propagated at right angles to the main set of microcracks. The creation of a significant fracture process zone surrounding the propagating main crack has been confirmed. Real-time imaging of the fracture process and formation of fracture process zone by AE techniques yielded results in very good agreement with those obtained by direct optical analysis.     

Quantifying Damage, Saturation and Anisotropy in Cracked Rocks by Inverting Elastic Wave Velocities

Crack damage results in a decrease of elastic wave velocities and in the development of anisotropy. Using non-interactive crack effective medium theory as a fundamental tool, we calculate dry and wet elastic properties of cracked rocks in terms of a crack density tensor, average crack aspect ratio and mean crack fabric orientation from the solid grains and fluid elastic properties. Using this same tool, we show that both the anisotropy and shear-wave splitting of elastic waves can be derived. Two simple crack distributions are considered for which the predicted anisotropy depends strongly on the saturation, reaching up to 60% in the dry case. Comparison with experimental data on two granites, a basalt and a marble, shows that the range of validity of the non-interactive effective medium theory model extends to a total crack density of approximately 0.5, considering symmetries up to orthorhombic. In the isotropic case, Kachanov's (1994) non-interactive effective medium model was used in order to invert elastic wave velocities and infer both crack density and aspect ratio evolutions. Inversions are stable and give coherent results in terms of crack density and aperture evolution. Crack density variations can be interpreted in terms of crack growth and/or changes of the crack surface contact areas as cracks are being closed or opened respectively. More importantly, the recovered evolution of aspect ratio shows an exponentially decreasing aspect ratio (and therefore aperture) with pressure, which has broader geophysical implications, in particular on fluid flow. The recovered evolution of aspect ratio is also consistent with current mechanical theories of crack closure. In the anisotropic cases—both transverse isotropic and orthorhombic symmetries were considered—anisotropy and saturation patterns were well reproduced by the modelling, and mean crack fabric orientations we recovered are consistent with in situ geophysical imaging. Our results point out that: (1) It is possible to predict damage, anisotropy and saturation in terms of a crack density tensor and mean crack aspect ratio and orientation; (2) using well constrained wave velocity data, it is possible to extrapolate the contemporaneous evolution of crack density, anisotropy and saturation using wave velocity inversion as a tool; 3) using such an inversion tool opens the door in linking elastic properties, variations to permeability.     

Forest fire ash impact on micro- and macroalgae in the receiving waters of the east coast of South Korea

Mountain forest fire ash flushed into the eastern coastal waters of South Korea is known to contain cadmium as one of its significant constituents. To study its impact, two representatives of the micro- and macroalgal communities, Ulva pertusa and Nannochloropsis oculata, were exposed to the concentration range of Cd indicated from the forest fire localities. At low concentrations of 0.224–0.448 mg L⁻¹, a 20% reduction in growth rate of N. oculata was observed. Chlorophyll a pigment concentration was proportionate to the growth reduction while at higher concentrations (1.792 mg L⁻¹) pigments were completely leached. In the macrophyte U. pertusa, a similar trend of pigment leaching was observed. Bioaccumulation factors obtained for these rapidly growing algal species revealed excessive bioconcentration of Cd. Variations in the concentration of Cd among the samples collected along the Korean coast clearly indicated the additional source of metal influx from the forest fires.