Spatial differentiation in stable isotope compositions of surface waters and its environmental significance in the Issyk-Kul Lake region of Central Asia

Stable isotope values of oxygen(~(18)O) and hydrogen(~(2)H) of surface waters were used to study the origin and environmental significances in the Issyk-Kul basin of Kyrgyzstan in Central Asia, which is the most important intermountain basin in the modern Tien Shan orogen. This study is the first analysis of hydrochemical spatial differentiation in the stable isotopes of surface waters in this watershed.75 samples were collected from rivers, springs, lakes,rain and snow during the rainy season in July and August of 2016. Stable isotopes of ~(18)O and ~(2)H were studied for all samples, and cation ratios(Sr/Ca and Mg/Ca) were also determined for lake water samples.Stable isotope values from precipitation scattered around the Local Meteoric Water Line(determined from Urumqi Station of the global network of isotopes in precipitation(GNIP)), together with values of the Deuterium excess parameter(d) from 15.3‰ to30.5‰, with an average of 19.8‰, indicating that the moisture sources are primarily from regions with low relative humidity. The δ~(18)O and δ~(2)H values were significantly different between the river and lake samples, indicating that regional evaporation caused the isotopic enrichment of lake water. Geospatial autocorrelation, measured by Moran's I coefficient,indicated weak spatial autocorrelation within stable isotopes of oxygen and hydrogen in the surface waters of the studied area, which is primarily an effect of climate during the water chemistry evolution. The cation ratios Sr/Ca and Mg/Ca in lake water samples were not correlated with the concentration of total dissolved solids, but did show correlation with stable isotopic values, which is significant for paleoenvironmental reconstruction.     

PHoToNs–A parallel heterogeneous and threads oriented code for cosmological N-body simulation

We introduce a new code for cosmological simulations, PHo To Ns, which incorporates features for performing massive cosmological simulations on heterogeneous high performance computer(HPC) systems and threads oriented programming. PHo To Ns adopts a hybrid scheme to compute gravitational force, with the conventional Particle-Mesh(PM) algorithm to compute the long-range force,the Tree algorithm to compute the short range force and the direct summation Particle-Particle(PP) algorithm to compute gravity from very close particles. A self-similar space filling a Peano-Hilbert curve is used to decompose the computing domain. Threads programming is advantageously used to more flexibly manage the domain communication, PM calculation and synchronization, as well as Dual Tree Traversal on the CPU+MIC platform. PHo To Ns scales well and efficiency of the PP kernel achieves68.6% of peak performance on MIC and 74.4% on CPU platforms. We also test the accuracy of the code against the much used Gadget-2 in the community and found excellent agreement.     

动态周跳处理方法研究

通过对基于滤波进行周跳处理的 DIA(detection、identification and adaptation)方法、两步 Kalman 滤波法以及连续周跳检验法的分析,提出了接收机高动态情况下也适用的,改进的动态周跳处理方法。 通过选取“当前冶统计模型作为滤波的状态模型,联合利用载波相位和多普勒观测值进行周跳辨识,同时对周跳偏差进行即时估计和改正。 利用机载测量数据模拟不同周跳发生的情况进行计算分析表明,即使在载体运动情况变化较大的情况下, 本文所提出的算法也能够较好的抵御机动误差的影响,对于多周跳和连续周跳的问题都能够快速准确的处理。     

The impact of scour processes on a smothered reef system in the Irish Sea

The Irish Sea, like many marine areas, is threatened by anthropogenic activities. In particular the Pisces Reef system, a series of smothered rocky reefs are subject to fishing pressures as a result of their position within a Nephrops norvegicus fishery. In an area of sediment deposition and retention the reefs modify the environment by increasing the energy of near-bottom currents which results in localised scouring. This is the first study to attempt to characterise and investigate the ecological functioning of the Pisces Reef system. A multidisciplinary approach was essential for accurate investigation of the area. To facilitate more effective management of the benthic habitats of the Reef system, this study integrates acoustic, seismic, grab sampling and video ground-truthing methods for benthic habitat discrimination. Orientation of the scour hollows also suggest that seabed features could be used to infer dominant flow regimes such as the Irish Sea Gyre. The data revealed significant geology–benthos relationships. A unique biotope was described for the reef habitat and it was demonstrated that scouring may influence community composition through disturbance mechanisms. This study provides preliminary information required for management of a unique habitat within a uniform region.     

东平-汶上铁成矿带西侧低缓磁异常区找矿前景分析

梁山东丁庄铁矿位于东平-汶上铁成矿带西侧的低缓磁异常区,为区内新发现的沉积变质型铁矿床。通过1∶1万高精度磁法面积测量工作,在区内圈定3个磁异常,并进行钻探验证,证实其中2个为隐伏磁铁矿体引起,矿体赋存于泰山岩群山草峪组中。通过研究矿体的地质特征、磁异常特征,并与区域铁矿成矿条件对比分析,认为区内矿致磁异常特征一般表现为在数十纳特的平缓背景场基础上,突然升高至数百纳特的相对高值异常,具突变特征。该类异常一般呈NW走向,与东平-汶上铁成矿带走向基本一致,其形态一般呈规则的长条带状、椭圆状或串珠状。区域上存在较多与研究区具有相似特征的低缓磁异常,且具备有利的成矿地层条件,因此认为区域上低缓磁异常区具有较大的找矿潜力,找矿前景良好。     

山东蓬莱沿海鱼类的初步调查

１９９３年７月至１９９８年８月对蓬莱沿海定置网渔获的鱼类进行初步调查,结果表明,蓬莱沿海鱼类共有１３７种,分别隶属于５９科１０８属。根据其适温类型可分为暖水性鱼类３４种,占总数的２４．８２％;暖温性鱼类８３种,占总数的６０．５８％;冷温性鱼类２０种,占总数的１４．６０％。根据食性类型,可分为３类,其中游泳动物食性的鱼类３６种,占总数的２６．２８％;浮游动物食性有２２种,占总数的１６．０６％;底栖动物食性７９种,占总数的５７．６６％．从栖息生境的多样性来看,可分为中上层鱼类３８种,占总数的２７．７４％;近底层鱼类２５种,占总数的１８．２５％;底层鱼类６４种,占总数的４６．７１％;岩礁性鱼类１０种,占总数的７．３０％。并就渔业开发与保护提出了建议。     

基于遥感和GIS的建筑物震害损失评估方法研究与实现

介绍了一种使用遥感技术进行震后损失快速评估的方法,评估流程包括震害提取和损失评估两个部分。评估方式根据需求可以分为基于震害指数的评估和基于图像分类结果的评估两种模式,前者通过震害指数与烈度的关系得到地面居民住地的宏观震害情况,结合地震应急数据进行建筑物损失评估;后者采用图像处理技术,选取典型震害样本以图像分类技术得到地面居民住地的分级分类的震害结果,然后计算参数进行损失评估。损失评估的计算根据震害提取模式而不同。这种遥感震害评估方法和计算流程结合了遥感和GIS技术,以满足实际工作需求目标,提高了震害提取的自动化程度,实现多人工作模式,通过有效率的人机交互来提高遥感震害评估的速度。     

水声环境资料质量检核评估标准规范研究

为规范水声环境资料质量检核评估工作,开展了水声环境资料质量检核评估标准规范研究,参照水声环境数据后期处理一般程序,梳理分析了原始数据、处理算法、模型运用及处理流程等数据质量误差来源;结合标准化水声环境资料处理程序及成果形式,研究了数据及数据处理全流程检核评估方法,给出数据文件、处理代码及配套文档资料应包含的内容及检查方...     

Selection of sand models and identification of parameters using an enhanced genetic algorithm

Numerous constitutive models of granular soils have been developed during the last few decades. As a consequence, how to select an appropriate model with the necessary features based on conventional tests and with an easy way of identifying parameters for geotechnical applications has become a major issue. This paper aims to discuss the selection of sand models and parameters identification by using genetic algorithm. A real‐coded genetic algorithm is enhanced for the optimization with high efficiency. Models with gradually varying features (elastic‐perfectly plastic modelling, nonlinear stress–strain hardening, critical state concept and two‐surface concept) are selected from numerous sand models as examples for optimization. Conventional triaxial tests on Hostun sand are selected as the objectives in the optimization. Four key points are then discussed in turn: (i) which features are necessary to be accounted for in constitutive modelling of sand; (ii) which type of tests (drained and/or undrained) should be selected for an optimal identification of parameters; (iii) what is the minimum number of tests that should be selected for parameter identification; and (iv) what is the suitable and least strain level of objective tests to obtain reliable and reasonable parameters. Finally, a useful guide, based on all comparisons, is provided at the end of the discussion. Copyright © 2015 John Wiley & Sons, Ltd.