Overwater dispersion in coastal regions

Air pollution sources such as oil platforms and ships are sometimes located near coastlines where the plumes can impact population centers. Models of overwater dispersion must account for the stability of the overwater boundary layer. An overwater dispersion model based on the standard Gaussian formula is described which uses measurements of the air-sea temperature difference, the wind speed, and the mixing depth to predict concentration patterns at the coastline. Internal boundary layers and complex terrain at the coastline are accounted for. This new model is evaluated using the results of three tracer experiments in United States coastal zones.     

Mn(II) partitioning between calcium and magnesium sites in studies of dolomite origin

In an Electron Spin Resonance (ESR) study of over 30 dolomites, representing a variety of probable sedimentary origins, we observed a Mg-site to Ca-site ratio in the Mn distribution that suggests two groups of dolomite. In one group the dolomites have a Mn distribution ratio near 5.0 and an excess of Ca; in the other group the dolomites are near-stoichiometric but have a Mn distribution ratio that varies from near 5 to near 70. We suggest that these two groups reflect different origins for the dolomites. The wide variation in the manganese distribution ratio for the near-stoichiometric dolomites supplies a parameter against which other variables can be plotted in studies of dolomite origin.     

Stable isotope geochemistry of acid mine drainage: Experimental oxidation of pyrite

Sulfate and water from experiments in which pyrite was oxidized at a pH of 2.0 were analyzed for sulfur and oxygen stable isotopes. Experiments were conducted under both aerobic and anaerobic sterile conditions, as well as under aerobic conditions in the presence of Thiobacillus ferrooxidans, to elucidate the pathways of oxidation. Oxygen isotope fractionation between SO^2?₄ and H₂O varied from +4.0 %. (anaerobic, sterile) to + 18.0 %. (aerobic, with T. ferrooxidans.). The oxygen isotope composition of dissolved oxygen utilized in both chemical and microbially-mediated oxidation was also determined (+11.4 %., by T. ferrooxidans; +18.4 %., chemical). Contributions of water-derived oxygen and dissolved oxygen to the sulfate produced in the oxidation of pyrite could thus be estimated. Water-derived oxygen constituted from 23 to ~ 100 percent of the oxygen in the sulfate produced in the experiments, and this closely approximates the range of contribution in natural acid mine drainage. Oxidation of sulfides in anaerobic, water-saturated environments occurs primarily by chemical oxidation pathways, whereas oxidation of sulfides in well-aerated, unsaturated zone environments occurs dominantly by microbially mediated pathways.     

An Integrated Hydrochemical Approach to Deduce the Response of an Aquifer System During Its History of Abstraction

The investigation of the regional flow characteristics of aquifers is important with respect to aquifer management. To determine regional flows, use can be made of hydraulic and hydrochemical data. In a study of a Chalk Aquifer System in the south of Lincolnshire, England, a combined hydrochemical approach using major, minor and isotope chemistry is described. The chemical data have been used because hydraulic information is difficult to interpret both locally and regionally as a consequence of multi-layered hydraulic zones, nonhomogeneous fissure zones, and variable erosional features. By characterizing ground-water types on the basis of major ion chemistry, and subsequently interrelating with minor ion distributions (notably iodide supported by strontium), a reasonable assessment of operative flow paths and mechanisms has been made. Substantiation of the conclusions reached using major and minor ion chemistry is provided by the environmental isotope data of carbon and tritium.     

A Simple Pneumatic Device and Technique for Performing Rising Water Level Slug Tests

Transmissivity can be estimated by several well documented methods employing data from rising water level slug tests in wells. A very simple and relatively inexpensive system can be constructed to lower the water level in a well. Compressed air is injected through a sealed device called a well head manifold, which screws onto the casing top and contains an air pressure gauge, an air entry valve, a quick release valve and a multi-channel water level indicator or a pressure transducer. Either of the latter is lowered into the well prior to pressurization.
Compressed air is injected into the casing at a low rate through the manifold, depressing the water level a desired amount. After stabilization, the quick release valve is opened and the air pressure inside the casing is reduced to atmospheric pressure instantaneously; the water level then starts to rise. Successive elevations of the rising water level are determined with the indicator or transducer and their elapsed times from valve opening are recorded. Plots of water level recovery vs. time can then be used to estimate transmissivity by the published methods of Cooper, Bredehoeft and Papadopulos (1967), Ferris and Knowles (1954) and Hvorslev(1951).
All of the items used for construction, with the exception of the quick release valve, can be bought off the shelf. The valve can be easily constructed in a machine shop. The total cost of the device, exclusive of the transducer, should be less than $500.     

Determination of groundwater flow-through regimes of shallow lakes and wetlands from numerical analysis of stable isotope and chloride tracer distribution patterns

A numerical model previously developed to systematically examine groundwater flow in vertical section near shallow surface water bodies such as lakes, wetlands and ponds is further developed to include simulation of the distribution patterns of hydrogeochemical and stable isotopic tracers in relation to the surface water body and the geometry of distribution patterns of the tracers in the groundwater release zone of the lake. Many different possible flow regimes are identified, however, in this paper attention is focused on flow-through water bodies, as these are the flow regimes observed in field validation. Two shallow lakes on the Swan Coastal Plain of south-west Western Australia are the subject of field studies where hydrogeochemical and stable isotopes are used to validate the flow-through groundwater flow regime predicted by the modelling confirming the validity of the approach. The flow regime transition diagrams introduced in earlier papers are extended to include consideration of the hydrogeochemical and stable isotopic indices Cl_L/Cl₊ and (1000+δ_L)/(1000+δ₊). These ratios are introduced as an additional two of nine non-dimensional ratios that are necessary to analyse the problem. The ratios represent the chloride and isotopic composition (Cl_L and δ_L), respectively, in the groundwater release zones of the lakes, relative to these parameters in the groundwater capture zone (Cl₊ and δ₊) for the lake. Field data from the case studies plotted on appropriately configured transition diagrams demonstrates the overall validity of the modelling approach and its underlying assumptions. It is concluded that isotopic and hydrogeochemical data are invaluable in interpreting the interaction between lakes or wetlands and regional aquifers as it is very difficult to make physical or hydraulic measurements in the field that allow an understanding of lake–aquifer interaction. The tools and concepts developed that are summarized in the presented transition diagrams are invaluable starting points for the consideration and analysis of other case-specific examples of groundwater–surface water interaction and will improve the scientific basis of decision-making concerning lake and wetland management and groundwater interaction by water resource and environmental managers.     

Hydrostratigraphy and geochemistry at a coastal sandfill in Singapore

A characterization study was carried out in a 10-m-thick sandfill, formed by hydraulic filling with marine sand, in Singapore. Placement methods and compaction were found to influence hydrostratigraphy. The deepest part of the sandfill consists of a loose sand layer and is overlain by a medium sand layer extending to mean sea level (MSL). At certain locations, a thin silty-sand layer was found. The different layers within the saturated zone were found to have different values for hydraulic conductivity (K) and groundwater flow velocity. Estimates for K increase according to the following sequence of methods: repacked sand column, step-pumping test, grain-size analysis and slug test. Slug tests and grain-size analysis yielded comparable estimates of K. The freshwater lens in the older part of the sandfill is about 2 m thicker than in a recently completed area. Comparisons of Ca²⁺/Cl^?, Mg²⁺/Cl^?, K ⁺/Cl^? and \({\text{Cl}}^{{\text{ - }}} {\text{/}}{\left( {{\text{Cl}}^{{\text{ - }}} {\text{ + HCO}}^{{\text{ - }}}_{{\text{3}}} } \right)}\) ratios indicate that the chemical composition of the groundwater at shallower depths has probably been altered by mineral dissolution. Weathering of carbonate minerals was found to be a major contributor to the major ions at these depths. The molar ratios approach the value for seawater at greater depths. The groundwater is close to equilibrium with calcite.     

Late‐Summer Peak in Sediment Accumulation in Two Lakes with Contrasting Watersheds,Alaska

The timing of clastic sedimentation in two glacial‐fed lakes with contrasting watersheds was monitored using sequencing sediment traps for two consecutive years at Allison Lake (Chugach Range, Alaska) and four months at Shainin Lake (Brooks Range, Alaska). Shainin Lake is a weakly stratified lake fed by distant glaciers, whereas Allison Lake is more strongly stratified and fed predominantly by proximal glaciers. At Shainin Lake, sediment accumulation started in late June and reached its maximum in mid‐August, just before lake mixing and during a period of low river discharge. The grain size of the sediment reaching the sediment trap in Shainin Lake was homogenous throughout the summer. At Allison Lake, pulsed sedimentation of coarse particles during late summer and early fall storms were superimposed on the fine‐grained sedimentation pattern similar to that observed at Shainin Lake. These storms triggered underflows that were observed in the thermal structure of the lake and deposited abundant sediment. The sequencing sediment traps reveal a lag between fluvial discharge and sediment deposition at both lakes, implying limitations to interpreting intra‐annual sedimentary features in terms of inflow discharge.     

Shoreline erosion: a cautionary note in using small farm dams to determine catchment erosion rates

Data from 10 small farm dams in SE Australia show that shoreline erosion due to farm livestock access to the dams can account for a significant proportion (up to 85%) of sediment contained in the dam. The volumes of sediment resulting from such shoreline erosion may be of the same order as the volumes produced by gully erosion in the dams' catchments, prompting caution in using farm dams to which livestock have access to determine small catchment erosion rates. Other issues, related to the trap efficiency, also mean that erosion estimates based on farm dam sedimentation should be treated with caution. © 1998 John Wiley & Sons, Ltd.     

Daily rainfall erosivity as an indicator for natural disasters: assessment in mountainous regions of southeastern Brazil

Natural Hazards - Rainfall erosivity is defined as the rainfall potential to cause erosion. Its concept is based on the kinetic energy of rainfall, rainfall intensity, and maximum rainfall...