中国兴凯湖北岸平原晚全新世花粉记录及泥炭沼泽形成

通过兴凯湖北岸平原泥炭剖面高分辩率花粉分析研究，对晚全新世花粉划分4个组合带。XKH-4组合时期(1857～1746aB．P．)为沼泽发育前期，这一时期花粉浓度小，陆生草本植物占优势，气候干冷。XKH-3组合时期(1746～1287aB．P．)为沼泽发育早期，这一时期花粉浓度较大，且水生植物花粉含量为剖面最高，喜温落叶阔叶植物大发展时期，气候温和湿润。XKH-2组合时期(1287～602aB．P．)为沼泽发育中期，这一时期花粉浓度最小，但以陆生草本植物为主，木本植物为辅，水生植物急剧减少，针叶植物出现两次高峰，气候向冷干方向发展。XKH-1组合时期(602aB．P．至今)为沼泽发育盛期，这一时期花粉浓度最大，陆生草本植物大发展时期，气候波动较大。     

上海地区湿地水生维管束植物及其区系特征

在参照相关资料基础上，结合实地调查，得出上海地区湿地水生维管束植物共49科107属179种。从植物生态型和生活型等方面来划分，上海地区水生维管束植物可主要分为内陆河湖水生植物、河口海岸滩涂植物和湿生植物3种类型。从区系组成来看，包含5种以上的12个较大科构成了上海地区水生维管束植物的主体，其中禾本科和莎草科种类最多；区内各属种数都在10种以下，包含3种以上的属有19属，共79种，分别占总属数的17．8％和总种数的44．2％。从区系分布区类型来看，水生蕨类植物种主要有4种分布区类型，世界分布为主要类型；而水生种子植物属有13种分布区类型，其中6个热带分布类型共有39属，占总属数的61．9％，6个温带分布类型共有24属，占总属数的38．1％，表明上海地区水生种子植物区系具有偏热带性质。同时，讨论了水生维管束植物在湿地生态系统以及湿地生态恢复中的重要作用。     

一种组合优化的多边形化简方法

以多边形轮廓为目标 ,依据曲线特征点将其分解为一系列的弯曲特征 ,并对此弯曲特征集实施组合优化 ,将入围弯曲首尾相连 ,即可得到最终的化简结果     

塔城市一次暴雪天气的分析

2003年2月22日塔城市出现一次暴雪天气过程。文章着重分析了此次天气过程的高空环流形势、地面形势、T—Td等，指出暖湿气流是造成暴雪的主要原因。     

山西大同-阳高地震活动背景

通过对大同盆地历史地震活动及大同盆地历史地震活动与华北地震区、山西地震带强震活动的关系的研究，得出山西大同-阳高1989年6．1级地震活动是这一地区历史地震的延续，是华北北部中强地震活动的重要组成部分，具有广义前震的重要意义，其后对应发生的河北张北6．2级地震。标志着华北地震区的地震活动期已进入尾声。     

基于二维小波变换的FMI图象分割

为了从FMI资料中定量提取参数，一个重要的步骤是从实际FMI资料中分离出反映溶孔、溶洞、裂缝的子图像。本文给出的方法，考虑图像像元邻域的特征，应用二维小波变换求出目标与背景边缘的点集，按这个边缘点集的坐标点所对应的原图像像素灰度值的平均值作为分割阈值进行图像分割。实际资料处理表明，应用这种方法可以从实际的FMI资料中准确地分割出孔洞、裂缝的子图像并且可以按深度段连续自动处理，为后续定量计算参数奠定了良好基础。     

Soil respiration in tropical seasonal rain forest in Xishuangbanna, SW China

With the static opaque chamber and gas chromatography technique, from January 2003 to January 2004 soil respiration was investigated in a tropical seasonal rain forest in Xishuangbanna, SW China. In this study three treatments were applied, each with three replicates: A (bare soil), B (soil+litter), and C (soil+litter+seedling). The results showed that soil respiration varied seasonally, low from December 2003 to February 2004, and high from June to July 2004. The annual average values of CO2 efflux from soil respiration differed among the treatments at 1% level, with the rank of C (14642 mgCO2· m-2. h-1)＞B (12807 mgCO2· m-2. h-1)＞A (9532 mgCO2· m-2. h-1). Diurnal variation in soil respiration was not apparent due to little diurnal temperate change in Xishuangbanna. There was a parabola relationship between soil respiration and soil moisture at 1% level. Soil respiration rates were higher when soil moisture ranged from 35% to 45%. There was an exponential relationship between soil respiration and soil temperature (at a depth of 5cm in mineral soil) at 1% level. The calculated Q1o values in this study,ranging from 2.03 to 2.36, were very near to those of tropical soil reported. The CO2 efflux in 2003was 5.34 kgCO2· m-2. a-1 from soil plus litter plus seedling, of them 3.48 kgCO2· m-2. a-1 from soil (accounting for 62.5%), 1.19 kgCO2· m-2. a-1 from litter (22.3%) and 0.67 kgCO2·m-2. a-1 from seedling (12.5%).     

Delayed geochemical hazard: Concept, digital model and case study

Delayed Geochemical Hazard (DGH briefly) presents the whole process of a kind of serious ecological and environmental hazard caused by sudden reactivation and sharp release of long-term accumulated pollutant from stable species to active ones in soil or sediment system due to the change of physical-chemical conditions (such as temperature, pH, Eh, moisture, the concentrations of organic matters, etc.) or the decrease of environment capacity. The characteristics of DGH are discussed. The process of a typical DGH can be expressed as a nonlinear polynomial. The points where the derivative functions of the first and second orders of the polynomial reach zero, minimum and maximum are keys for risk assessment and harzard pridication.The process and mechanism of the hazard is due to the transform of pollutant among different species principally. The concepts of "total releasable content of pollutant", TRCP, and "total concentration of active specie", TCAS, are necessarily defined to describe the mechanism of DGH. The possibility of the temporal and spatial propagation is discussed. Case study shows that there exists a transform mechanism of "gradual release" and "chain reaction" among the species of the exchangeable and the bounds to carbonate, iron and manganese oxides and organic matter, thus causing the delayed geochemical hazard.     

Chemical forms of heavy metal contaminants in sediments of Miyun reservoir

The chemical forms, spatial distribution and sources of As, Hg, Cd, Pb and Zn in sediments of the Miyun reservoir were studied. The results of sequential extraction demonstrate that most of As, Pb and Zn were bound to the residual fraction, Hg was associated with the sulfide fraction while Cd was associated with the carbonate fraction and the residual fraction. On the vertical profiles the concentrations of the heavy metals in total and each fractions mostly decreased with increasing depths in sediments, suggesting that the heavy metals input from the upstream watershed increases yearly. Summation of the residual fraction, the sulfide fraction and the carbonate fraction accounts for 60.03%―85.60% of the total heavy metal contents in the sediments, which represent the geochemical background values of the elements and relate closely to soil erosion. Results of the main factor analysis show that most sediments of the reservoir come from the upstream soil erosion, the point source pollution and domestic waste. Moreover, the microbial activities taking place on the sediment-water interface are also one of the major factors to cause the increasing content of the organic matter fraction and the iron-manganese oxide fraction. Environmental change of the reservoir water could make the removability of the heavy metals increase, leading to the increase of their concentrations in pore water in sediments, and imperiling water quality of the reservoir.     

Least-squares wave-path migration

We present a new least-squares migration method called least-squares wave-path migration. The proposed method combines an iterative conjugate-gradient solver with a stationary-phase wave-path migration operator. Numerical tests demonstrate that (i) least-squares wave-path migration is computationally more efficient than and almost as accurate as Kirchhoff least-squares migration, and (ii) many of the artefacts seen in wave-path migration images are suppressed after several conjugate-gradient iterations. Previous results have shown that 3D wave-path migration is up to 100 times faster than a standard 3D Kirchhoff migration, but sometimes at the cost of reduced quality. With the proposed least-squares wave-path migration method, the image quality in wave-path migration can be improved at an acceptable increase in computational cost.