曹妃甸近岸及周边海区碎屑矿物组成特征及其环境意义

为探讨曹妃甸近岸及周边海区沉积物碎屑矿物组成特征以及曹妃甸大规模围填海工程对其影响,作者对2013年10月采自曹妃甸及周边海区的表层沉积物样品采用轻重矿物分离的方法进行了鉴定。结果表明:大规模围填海工程在改变曹妃甸岸线形态的同时也改变了其冲淤环境,使得碎屑矿物组分在大规模围填海前后发生一定变化。研究区的沉积物整体以轻矿物为主,平均含量为97.83%,其中曹妃甸近岸平均含量为95.57%;重矿物平均含量为2.17%,其中曹妃甸近岸平均含量为4.43%。研究区的重矿物优势矿物主要有普通角闪石、绿帘石和自生黄铁矿,其中普通角闪石所占比例在曹妃甸近岸达到最高值(36.41%);轻矿物的优势矿物主要有石英、斜长石和风化碎屑,其中石英所占比例也在曹妃甸近岸达到最高值(62.72%)。研究发现,曹妃甸近岸沉积物碎屑矿物相对含量增加而重矿物基本不变,这在一定程度上揭示了大规模人工围填海工程对曹妃甸近岸及周边海区沉积环境的影响。     

大连蜈蚣藻孢子发育及生活史的研究

在实验室条件下,对大连蜈蚣藻(Grateloupia dalianensis H.W.Wang et D.Zhao)的孢子早期发育、盘状体的形成和直立枝生长进行了详细研究,对其生活史进行了详细观察,并进行了温度和光照强度对孢子发育影响的研究。结果表明:(1)孢子发育类型为间接盘状体型;(2)生活史由雌、雄配子体、四分孢子体和果孢子体三相世代组成,配子体与孢子体形态相同,属于同型世代交替,与属模蜈蚣藻(G.filicina)一致;(3)温度对盘状体和直立枝生长均有影响,最适温度均为16℃;(4)光照强度对盘状体和直立枝生长均有影响,最适光照强度分别为7 500 lx和10 000 lx。     

Paratacamite from Gypsum Veins in Sandstones of the Kuqa Basin,Xinjiang, China: Implications for a New Epigenetic Cu Enrichment Mechanism

The Kuqa Basin filled with Paleogene evaporite series is located in the northeast of the Tarim Basin, Xinjiang, China. It is famous for sandstone‐hosted Cu deposits formed by synsedimentary processes. However, our recent studies reveal that there has been another Cu mineralization mechanism in this basin. Field investigations show that there is a close relationship among faults, salt domes, and brine. Cu deposits are mainly located in two east–west‐trending anticlinal belts in the basin, adjacent to salt domes in the belts. Cu minerals in gypsum veins of the Jidike and Kangcun formations have been investigated by SEM, EDS, and X‐ray diffraction methods. The occurrence of paratacamite in gypsum veins has been reported to coexist with glauberite and halite in the joint planes of sandstones. In addition, it occurs accompanying residual crystal salt encrustation in limestone fractures, or in sandstones in dendritic form. These features indicate that the surface‐Cu enrichment in the Kuqa Basin might have originated from Cu‐bearing brine in the underlying evaporite units, which migrated upward along fractures. In addition, the presence of H₂S in the east–west fault belt in the Kuqa Basin, and the discovery of surface sulfur, calcium carbonate, and covellite, suggest thermochemical sulfate reduction near salt domes in the deeper parts of the rock units. This process resulted in the generation of reduced brine and provided a favorable environment for Cu enrichment. Therefore, the surface‐Cu mineralization near salt domes is interpreted to be the result of Cu‐bearing brine migrating upward to the surface along faults (or joints) following the intrusion of deep salt domes. The geological evidence indicates the presence of reducing brine and Cu‐bearing brine near the salt dome in the deeper rocks of the Kuqa Basin, thus making the intrusive contact zone of the salt dome a favorable site for the epigenetic enrichment of Cu. Our study demonstrates that Cu enrichment in the Kuqa Basin resulted not only from synsedimentary deposition but also through epigenetic enrichment associated with salt dome intrusion and brine‐rich fluids.     

Assessment of small-diameter shallow wells for managed aquifer recharge at a site in southern Styria,Austria

An approach to establish the recharge component of managed aquifer recharge (MAR) has recently been proposed that uses small-diameter shallow wells installed using relatively inexpensive drilling methods such as direct push. As part of further development of that approach, a generalized procedure is presented for a technical and economic assessment of the approach’s potential in comparison to other systems. Following this procedure, the use of small-diameter wells was evaluated both experimentally and numerically for a site located in southern Styria, Austria. MAR is currently done at the site using a horizontal pipe infiltration system, and system expansion has been proposed with a target rate of 12 l/s using small-diameter wells as one possible option. A short-duration single-well field recharge experiment (recharge rate 1.3–3.5 l/s) was performed (recharge by gravity only). Numerical modeling of the injection test was used to estimate hydraulic conductivity (K). Quasi-steady-state, single-well recharge simulations for different locations, as well as a long-term transient simulation, were performed using the K value calibrated from the field injection test. Results indicate that a recharge capacity of 4.1 l/s was achievable with a maximum head rise of 0.2 m at the injection well. Finally, simulations were performed for three different well fields (4, 6 and 8 wells, respectively) designed to infiltrate a target rate of 12 l/s. The experimental and numerical assessments, supported by a cost analysis of the small-diameter wells, indicate that the small-diameter wells are a viable, cost-effective recharge approach at this and other similar sites.     

A multiobjective steepest descent method with applications to optimal well control

Multiobjective optimization deals with mathematical optimization problems where two or more objective functions (cost functions) are to be optimized (maximized or minimized) simultaneously. In most cases of interest, the objective functions are in conflict, i.e., there does not exist a decision (design) vector (vector of optimization variables) at which every objective function takes on its optimal value. The solution of a multiobjective problem is commonly defined as a Pareto front, and any decision vector which maps to a point on the Pareto front is said to be Pareto optimal. We present an original derivation of an analytical expression for the steepest descent direction for multiobjective optimization for the case of two objectives. This leads to an algorithm which can be applied to obtain Pareto optimal points or, equivalently, points on the Pareto front when the problem is the minimization of two conflicting objectives. The method is in effect a generalization of the steepest descent algorithm for minimizing a single objective function. The steepest-descent multiobjective optimization algorithm is applied to obtain optimal well controls for two example problems where the two conflicting objectives are the maximization of the life-cycle (long-term) net-present-value (NPV) and the maximization of the short-term NPV. The results strongly suggest the multiobjective steepest-descent (MOSD) algorithm is more efficient than competing multiobjective optimization algorithms.     

Variations of Hydrodynamics and Submarine Groundwater Discharge in the Yellow River Estuary Under the Influence of the Water-Sediment Regulation Scheme

The “Water-Sediment Regulation Scheme” (WSRS) is critically important to the hydrologic evaluation of the Yellow River estuary since a huge pulse of water and sediment are delivered into the sea during a short period. We used the natural geochemical tracers radium (²²³Ra, ²²⁴Ra, ²²⁶Ra) and radon (²²²Rn) isotopes as well as other hydrological parameters to investigate the mixing variations and submarine groundwater discharge (SGD) in the Yellow River estuary under the influence of the 2013 WSRS. Dramatically elevated radium and radon isotopic activities were observed during this WSRS compared with activities measured during a non-WSRS period. Radium “water ages” indicated that the offshore transport rate nearly tripled when the river discharge increased from 400 to 3400 m³/s. We calculated the SGD flux in the Yellow River estuary based on a radium mass balance model as well as radium and radon time-series models. The SGD flux was estimated at 0.02~0.20 m/day during a non-WSRS period and 0.67~1.22 m/day during the 2013 WSRS period. The results also indicate that large river discharge tends to lead more intense SGD along the river channel direction with a large amount of fresh SGD.     

Stability analysis of an ancient landslide considering shear strength reduction behavior of slip zone soil

In this paper, the stability of an ancient landslide during the first impounding of a nearby reservoir is investigated through the analyses of the shear strength reduction behavior of slip zone soil. In view of the experimental observations, an empirical strain-dependent soil model is established and is then incorporated in finite element analyses. The numerical analysis results show that the failing sections progressively develop due to the soil strength declines from peak toward residual, and the shear zone propagates within the front slope. It is demonstrated in the numerical results that the toe weighting measure has a significant effect on restraining the shear displacements of the soils and preventing the progressive failure of the landslide. The field observations further confirmed the stability condition of the reinforced landslide.     

Two-dimensional landslide dynamic simulation based on a velocity-weakening friction law

Surprisingly, hypermobility (high velocity and long run-out) is a remarkable feature of large landslides and is still poorly understood. In this paper, a velocity-weakening friction law is incorporated into a depth-averaged landslide model for explaining the higher mobility mechanism of landslides. In order to improve the precision of the calculation, a coupled numerical method based on the finite volume method is proposed to solve the model equations. Finally, several numerical tests are performed to verify the stability of the algorithm and reliability of the model. The comparison between numerical results and experimental data indicates that the presented model can predict the movement of landslide accurately. Considering the effect of velocity-weakening friction law, the presented model can better reflect the hypermobility of landslide than the conventional Mohr–Coulomb friction model. This work shows that the application of a universal velocity-weakening friction law is effective in describing the hypermobility of landslide and predicting the extent of landslides.