Effect of scallop shells and sediment grain size on phytoplankton flux to the bed

A flume study was made of bed skin friction and phytoplankton (Thalassiosira weissf ogii) deposition about a sea scallop (Placopecten magellanicus) mimic on a coarse (mean grain dia. =1200 μm), medium (615 μm) and fine (170 μm) quarry sand. Bed skin friction immediately upstream, and at one shell diameter downstream of the mimic was 1.2–2.4 times higher than ambient values (8.1 × 10⁻² Pa). Directly downstream of the mimic there was a region of near-zero skin friction. Bed diatom density was correlated with changes in skin friction; after 21 h, cell densities were 36–87% greater in the regions of high skin friction upstream and downstream of scallop than in control experiments. The pattern of bed diatom density about the scallop was similar in the coarse and medium sands, but deposition to the fine bed was not affected by the mimic. Diatom density was significantly correlated with grain diameter; deposition in the coarse bed was 2.3 times higher than in the medium sand, and 7.4 times higher than in the fine sand. A field experiment confirmed that the coarse sand was a greater sink of phytoplankton pigment than the fine sand. Previous studies and scaling arguments suggest that the differences in bed diatom density were controlled by the magnitude of interfacial solute fluxes. Regions of high skin friction about the mimic increased the porewater exchange, resulting in greater concentrations of diatoms retained within the bed. Similarly, the more permeable coarse sand would have a greater rate of porewater exchange than the fine sand, explaining the higher bed diatom density. Differences in the predicted volume of interstitial void space as a function of grain size closely matched the observed differences in bed diatom density. Results suggest that alteration of boundary layer flows by centimetre scale topography such as scallops, increases the flux of particulate organic matter toward the bed, but whether it is retained within the bed, and thus made available to the benthos is dependent on the sediment granularity.     

巴基斯坦北Potwar形变区地震的震源机制研究

巴基斯坦北Potwar形变区是西北喜马拉雅褶皱逆冲带前陆区的一部分，绘制了该区的地震活动性图. 与相邻地区比较，该区地震并不活跃，没有显示出与地表地质构造相关的清晰地震活动图象. 做出了4次地震的震源机制解. 结果表明，有3次地震是左旋走滑断层活动，另一次地震是逆断层活动. 地震震源机制解的P轴方向为NW-SE和NE-SW. 现今的构造形变很可能也包括基底的形变.      

Estimated N2O and CO2 Emissions as Influenced by Agricultural Practices in Canada

The Denitrification-Decompostion (DNDC) model was used to estimate the impact of change in management practices on N₂O emissions in seven major soil regions in Canada, for the period 1970 to 2029. Conversion of cultivated land to permanent grassland would result in the greatest reduction in N₂O emissions, particularly in eastern Canada wherethe model estimated about 60% less N₂O emissions for thisconversion. About 33% less N₂O emissions were predicted for a changefrom conventional tillage to no-tillage in western Canada, however, a slight increase in N₂O emissions was predicted for eastern Canada. GreaterN₂O emissions in eastern Canada associated with the adoption of no-tillage were attributed to higher soil moisture causing denitrification, whereas the lower emissions in western Canada were attributed to less decomposition of soil organic matter in no-till versus conventional tilled soil. Elimination of summer fallow in a crop rotation resulted in a 9% decrease in N₂O emissions, with substantial emissions occurringduring the wetter fallow years when N had accumulated. Increasing N-fertilizer application rates by 50% increased average emissions by 32%,while a 50% decrease of N-fertilizer application decreased emissions by16%. In general, a small increase in N₂O emissions was predicted when N-fertilizer was applied in the fall rather than in the spring. Previous research on CO₂ emissions with the CENTURY model (Smith et al.,2001) allowed the quantification of the combined change in N₂O andCO₂ emissions in CO₂ equivalents for a wide range of managementpractices in the seven major soil regions in Canada. The management practices that have the greatest potential to reduce the combined N₂O andCO₂ emissions are conversion from conventional tillage to permanent grassland, reduced tillage, and reduction of summer fallow. The estimated net greenhouse gas (GHG) emission reduction when changing from cultivated land to permanent grassland ranged from 0.97 (Brown Chernozem) to 4.24 MgCO₂ equiv. ha^–1 y^–1 (BlackChernozem) for the seven soil regions examined. When changing from conventional tillage to no-tillage the net GHG emission reduction ranged from 0.33 (Brown Chernozem) to 0.80 Mg CO₂ equiv. ha^–1 y^–1 (Dark GrayLuvisol). Elimination of fallow in the crop rotation lead to an estimated net GHG emission reduction of 0.43 (Brown Chernozem) to 0.80 Mg CO₂ equiv.ha^–1 y^–1 (Dark Brown Chernozem). The addition of 50% more or 50% less N-fertilizer both resulted in slight increases in combined CO₂ and N₂O emissions. There was a tradeoff in GHG flux with greaterN₂O emissions and a comparable increase in carbon storage when 50% more N-fertilizer was added. The results from this work indicate that conversion of cultivated land to grassland, the conversion from conventional tillage to no-tillage, and the reduction of summerallow in crop rotations could substantially increase C sequestration and decrease net GHG emissions. Based on these results a simple scaling-up scenario to derive the possible impacts on Canada's Kyoto commitment has been calculated.     

Analytical methods Of assessing the image quality associated with digital and photographic imaging systems

The introduction of digital cameras for aerial survey photography and use of scanners with processed aerial film present a number of technical questions concerning the way photography is to be acquired in the future. Among the questions to be addressed are the comparative metric properties of images acquired by each system and the associated image quality characteristics. The new digital camera systems will require very careful appraisal, using well-established methods of assessing metric quality already available to survey organisations. The questions concerning image quality are more difficult to answer, as they require very specialised instrumentation if measurements are to be made directly in practice. Over the course of the past several decades a more analytical approach to assessing image quality has emerged, and one that may be used by individuals. The method is particularly effective where information on the micro-image characteristics of products is made available by the manufacturers concerned. An outline is given of some considerations that need to be taken into account when using an analytical approach, with references given for further reading.     

Aeolian abrasion and modes of fine particle production from natural red dune sands: an experimental study

A series of experiments was conducted to determine the potential for aeolian abrasion of natural dune sands to produce fine particles (< 125 µm) by (1) the release of resident fines; (2) spalling, chipping and breakage of particles; and (3) the removal of grain surface coatings. Parent samples were obtained from the surfaces of four active continental dunes and abraded using a glass ‘test tube’ chamber for up to 120 h. The fine particles produced by this abrasion process were trapped at varying time intervals and subject to detailed particle‐size analyses using a Coulter Multisizer. The abrasion of untreated parent samples produced fine particles in one of two main size classes, < 10 µm and > 50 µm, but when the parent sample was sieved to exclude particles < 250 µm, relatively more material in the range 10–50 µm was produced. For unsieved parent samples, the size range associated with the dominant mode varied according to the length of the abrasion time. The coarsest mode (> 63 µm) was dominant during the first 16 h of abrasion, then became less significant and is thought to be associated with the release of resident fines into suspension. The finest mode (< 10 µm) was absent or very weak during the first 16 h of abrasion, then became more significant and, in some instances, dominated the distribution as abrasion continued. Removal of grain surface coatings is the main source of fine material < 10 µm, and this may be a significant source of fine material in areas where sands are dominated by subrounded and rounded particles. By comparison with previous studies of aeolian particle abrasion, these natural dune sands produced very low quantities of fine material (by weight), but their spatial extent makes them potentially a significant source of dust‐sized particles at the global scale.     

Testing a statistical curve‐fitting procedure for quantifying sediment populations within multi‐modal particle‐size distributions

This paper describes a series of tests designed to evaluate the capacity of a personal computer (PC) based statistical curve‐fitting program called MIX to quantify composite populations within multi‐modal particle‐size distributions. Three natural soil samples were analysed by a Coulter Multisizer, and their particle‐size distributions analysed using MIX software to identify the modes, standard deviations and proportions of their composite populations. The particle‐size distributions of the three natural soil samples were then numerically combined in equal proportions using a spreadsheet program to create synthetic particle‐size distributions of known populations. MIX was then tested on the synthetic particle‐size distributions to see if the modes and proportions it identified were similar to those modes and proportions known to characterize the synthetic particle‐size distributions. The main outcome is that MIX can very accurately describe the modal particle size and proportions of the major composite populations within a particle‐size distribution. However MIX has difficulty in identifying small populations (those contributing <10 per cent of a total particle‐size distribution), particularly when they are located in the central sections of particle‐size distributions, overlain by larger populations, or when positioned in the fine tails of distributions. Despite these minor shortcomings, MIX is a valuable tool for the examination and interpretation of particle‐size data. Copyright © 2005 John Wiley & Sons, Ltd.     

The relation of Holocene fluvial terraces to changes in climate and sediment supply,South Fork Payette River,Idaho

Well-preserved Holocene terraces along the South Fork Payette River in central Idaho provide a record of fluvial system behavior in a steep mountain watershed characterized by weathered and erodible Idaho Batholith granitic rocks. Terrace deposit ages were provided by ¹⁴C dating of charcoal fragments and optically stimulated luminescence (OSL) dating of sandy sediments. Along with pairing of many terrace tread heights, these data indicate episodic downcutting during the Holocene, with a mean incision rate of ～0.9 m/ka from ～7 ka to present. Prior to 7 ka, the river incised to within～3 m of current bankfull, but then aggraded by ～5 m over at least a ～10 km-long reach in an episode centered ～7–6 ka. Aggradation may relate to (1) increased hillslope sediment input from landslides and debris flows in steep tributary basins with abundant grussified granitic bedrock, (2) possible local landslide-damming of the channel, (3) decreased peak discharge, or (4) a combination of these factors. Middle Holocene channel aggradation ca. 7–6 ka corresponds with a period of prolonged and widespread aridity in the northern Rocky Mountains. Between ～5 and 1.3 ka, the river aggraded slightly and then remained stable, forming a prominent terrace tread at ～3 m above current bankfull. Modest aggradation to vertical stability of the South Fork Payette River at the 1.5 m terrace level ～1.0–0.7 ka corresponds with large fire-related debris flows in tributaries during Medieval droughts. Three intervals of incision (～5.5–5 ka, 1.3–1.0 ka and 0.5 ka) correspond with frequent but small fire-related sedimentation events and generally cooler, wetter conditions suggesting increased snowmelt runoff discharges. Other possible drivers of channel incision include an increase in stochastic or climate-modulated large storms and floods and a reduction in delivery of hillslope sediment to the channel. Aggradation is more confidently tied to climate through increases in hillslope sediment delivery and (or) decreased stream power, both likely related to warmer, drier conditions (including high-severity fires) that reduce snowmelt and decrease vegetation cover on steep slopes. Thus, the Holocene terraces of the South Fork Payette River do not reflect simple stepwise incision with periods of vertical stability and lateral migration, but record substantial episodes of aggradation as well. We infer that increases in hillslope erosion and mass movements combined with reduced discharges during prolonged droughts episodically reverse the post-glacial trend of downcutting, in particular during the middle Holocene. The present bedrock-dominated channel implies a strong tendency toward incision in the late Holocene.     

A middle–late Ediacaran volcano‐sedimentary record from the eastern Arabian‐Nubian shield

The Ediacaran Jibalah Group comprises volcano‐sedimentary successions that filled small fault‐bound basins along the NW–SE‐trending Najd fault system in the eastern Arabian‐Nubian Shield. Like several other Jibalah basins, the Antaq basin contains exquisitely preserved sedimentary structures and felsic tuffs, and hence is an excellent candidate for calibrating late Ediacaran Earth history. Shallow‐marine strata from the upper Jibalah Group (Muraykhah Formation) contain a diversity of load structures and intimately related textured organic (microbial) surfaces, along with a fragment of a structure closely resembling an Ediacaran frond fossil and a possible specimen of Aspidella. Interspersed carbonate beds through the Muraykhah Formation record a positive δ¹³C shift from ?6 to 0‰. U‐Pb zircon geochronology indicates a maximum depositional age of ~570 Ma for the upper Jibalah Group, consistent with previous age estimates. Although this age overlaps with that of the upper Huqf Supergroup in nearby Oman, these sequences were deposited in contrasting tectonic settings on opposite sides of the final suture of the East African Orogen.