Measurement of alkaline and earthy ions in fish otolith and sea water using a high performance ion chromatography

Fish growth and the relation between growth and environmental conditions offer a good opportunity for measuring alkaline and earthy ions in fish otoliths.The analytical method must involve high sensitivity when attempting to discriminate between fish growth and environmental conditions.The aim of this paper is to propose a chromatographic method, with low detection limits, as a new approach in determining some important micronutrients present in sea water and fish otoliths.The work samples are: coastal, off-shore and sediment waters and fish otoliths (Engraulis encrasicholus, Mullus barbatus, Umbrina cirrhosa, Sciaena umbra, Pagellus erythrinus) in the Adriatic Sea and the Canal of Sicily.The analytical method includes an IONPAC CS12A chromatographic column and a 18 mM methanesulfonic acid eluent.The detection limit readings obtained with this method, for one E. encrasicholus fish otolith, weighing 2.6 mg are equal or inferior to 0.1 μg/L for lithium (Li), 59 μg/L for sodium (Na), 46 μg/L for ammonium (NH₄), 23 μg/L for potassium (K), 13 μg/L for magnesium (Mg), 88 μg/L for manganese (Mn), 2.567 μg/L for calcium (Ca) and 13 μg/L for strontium (Sr).The HPIC method minimizes overlaps such as Na on Li, and NH₄ in seawater and Ca on Mg and Sr in fish otolith. These elements are an essential constituent present in otoliths when describing the relation between growth and environmental conditions.Good separation among analytes is achieved within 16 min.     

Prediction of Load Carrying Capacity of Corroded Reinforced Concrete Beam

A novel method for prediction of the load carrying capacity of a corroded reinforced concrete beam (CRCB) is presented in the paper. Nine reinforced concrete beams, which had been working in an aggressive environment for more than 10 years, were tested in the laboratory. Comprehensive tests, including flexural test, strength test for corroded concrete and rusty rebar, and pullout test for bond strength between concrete and rebar, were condueted. The flexural test results of CRCBs reveal that the distribution of surface cracks on the beams shows a fractal behavior. The relationship between the fractal dimensions and mechanical properties of CRCBs is then studied. A prediction model based on artificial neural network (ANN) is established by the use of the fractal dimension as the corrosion index, together with the basic intbrmation of the beam. The validity of the prediction model is demonstrated through the experimental data, and satisfactory resuits are achieved.     

Geology of the Continental Margin of Enderby and Mac. Robertson Lands, East Antarctica: Insights from a Regional Data Set

In 2001 and 2002, Australia acquired an integrated geophysical data set over the deep-water continental margin of East Antarctica from west of Enderby Land to offshore from Prydz Bay. The data include approximately 7700 km of high-quality, deep-seismic data with coincident gravity, magnetic and bathymetry data, and 37 non-reversed refraction stations using expendable sonobuoys. Integration of these data with similar quality data recorded by Japan in 1999 allows a new regional interpretation of this sector of the Antarctic margin. This part of the Antarctic continental margin formed during the breakup of the eastern margin of India and East Antarctica, which culminated with the onset of seafloor spreading in the Valanginian. The geology of the Antarctic margin and the adjacent oceanic crust can be divided into distinct east and west sectors by an interpreted crustal boundary at approximately 58° E. Across this boundary, the continent–ocean boundary (COB), defined as the inboard edge of unequivocal oceanic crust, steps outboard from west to east by about 100 km. Structure in the sector west of 58° E is largely controlled by the mixed rift-transform setting. The edge of the onshore Archaean–Proterozoic Napier Complex is downfaulted oceanwards near the shelf edge by at least 6 km and these rocks are interpreted to underlie a rift basin beneath the continental slope. The thickness of rift and pre-rift rocks cannot be accurately determined with the available data, but they appear to be relatively thin. The margin is overlain by a blanket of post-rift sedimentary rocks that are up to 6 km thick beneath the lower continental slope. The COB in this sector is interpreted from the seismic reflection data and potential field modelling to coincide with the base of a basement depression at 8.0–8.5 s two-way time, approximately 170 km oceanwards of the shelf-edge bounding fault system. Oceanic crust in this sector is highly variable in character, from rugged with a relief of more than 1 km over distances of 10–20 km, to rugose with low-amplitude relief set on a long-wavelength undulating basement. The crustal velocity profile appears unusual, with velocities of 7.6–7.95 km s⁻¹ being recorded at several stations at a depth that gives a thickness of crust of only 4 km. If these velocities are from mantle, then the thin crust may be due to the presence of fracture zones. Alternatively, the velocities may be coming from a lower crust that has been heavily altered by the intrusion of mantle rocks. The sector east of 58° E has formed in a normal rifted margin setting, with complexities in the east from the underlying structure of the N–S trending Palaeozoic Lambert Graben. The Napier Complex is downfaulted to depths of 8–10 km beneath the upper continental slope, and the margin rift basin is more than 300 km wide. As in the western sector, the rift-stage rocks are probably relatively thin. This part of the margin is blanketed by post-rift sediments that are up to about 8 km thick. The interpreted COB in the eastern sector is the most prominent boundary in deep water, and typically coincides with a prominent oceanwards step-up in the basement level of up to 1 km. As in the west, the interpretation of this boundary is supported by potential field modelling. The oceanic crust adjacent to the COB in this sector has a highly distinctive character, commonly with (1) a smooth upper surface underlain by short, seaward-dipping flows; (2) a transparent upper crustal layer; (3) a lower crust dominated by dipping high-amplitude reflections that probably reflect intruded or altered shears; (4) a strong reflection Moho, confirmed by seismic refraction modelling; and (5) prominent landward-dipping upper mantle reflections on several adjacent lines. A similar style of oceanic crust is also found in contemporaneous ocean basins that developed between Greater India and Australia–Antarctica west of Bruce Rise on the Antarctic margin, and along the Cuvier margin of northwest Australia.     

Iceland and mid-oceanic ridges

Magnetic anomalies over Iceland, measured by Serson et al. (1968), are similar in shape and amplitude to those found over mid-oceanic ridges in general and over Reykjanes Ridge in particular. However, the geology of Iceland does not favour the simple model of sea floor spreading as formulated by Vine and Matthews. The Brunhes period volcanism can neither in place nor in time be related to an opening process of the Central Graben, which actually is a downthrown block and not an opening rift. Furthermore, the structure of Iceland is not symmetric with respect to the Central Graben. The geology of the Central Graben of Iceland does support a model proposed by Thorleifur Einarsson in 1967. In this model elongate ridges of pillow lavas are thought to have piled up on top of parallel volcanic fissures. The actual spreading is negligible. The fissures have been opening at random over a width of about 120 km, and no definite time scale can be set up for the associated magnetic anomalies. This conflict between Icelandic geology and the current views on sea floor spreading, can be evaded by supposing that the mere circumstance that Iceland is an island obscures a spreading process underneath. One might also postulate that Iceland nevertheless should stand as an example of a mid-oceanic ridge which implies that our ideas on sea floor spreading should be thoroughly revised.     

Short-term consequences of a benthic cyanobacterial bloom (Lyngbya majuscula Gomont) for fish and penaeid prawns in Moreton Bay (Queensland, Australia)

This study examined the phenology and ecological consequences of a benthic filamentous cyanobacterial bloom (Lyngbya majuscula) in Deception Bay (Moreton Bay, Queensland, Australia). Bloom initiation occurred in mid December 1999 and expanded to encompass an 8 km² area by April 2000. Small fish and penaeid prawns (<25 cm total length) were quantitatively sampled through periods designated as before, during and after the bloom using a combination of pop-netting within mangroves and beam trawling over adjacent seagrass beds. Data on larger-bodied fish were compiled from daily fishing logs provided by local commercial fishers. Changes in dry mass of bloom material caught in nets and changes in water chemistry were also measured. Mean concentrations of ammonia-N in residual water within mangroves were several orders of magnitude higher in the affected area than in the control and dissolved oxygen was markedly lower in affected areas. Across the study area, mean density, live mass and number of species declined during the bloom, with fish assemblages using mangroves showing greater decline than assemblages using seagrasses. Response at the species level was highly variable; generally, epibenthic species showed a more sustained decline than demersals. Mean monthly fish catch was significantly lower in bloom than non-bloom years. This study has also demonstrated that throughout the bloom, the affected area continued to support a highly diverse and abundant fish and prawn assemblage, and probably maintained its function as an important nursery habitat for many species.     

An ocean bottom,microprocessor based seismometer

We describe the design and construction of an ocean bottom seismometer configured as a computer, based on an Intersil IM6100 microprocessor plus appropriate peripheral devices. The sensors consist of triaxial 1 Hz seismometers and a hydrophone, each sensor channel being filtered prior to digitizing so that typical noise spectra are whitened. Digital data are recorded serially on magnetic tape. The instrument is placed on the ocean bottom by allowing it to fall freely from just below the surface. An acoustic system allows precise determination of instrument position, acoustic recall, and transmission of operational information to the surface. Release from an expendable anchor is accomplished by redundant pyrotechnic bolts which can be fired by acoustic command or by precision timers.The operational flexibility provided by the micro-computer, which executes the DEC PDP8/E instruction set, enables optimum use of the 6-hr recording capacity (at 128 samples/second/channel) in the context of the particular experiment being performed.

---