Surveys in Geophysics - Until now, the prismatic mass approximation of the topography and the constant density assumption have been mostly utilized in topographic reductions, which are rough... 相似文献
Mega-earthquakes and extreme climate events accompanied by intrinsic fragile geology lead to numerous landslides along mountain highways in Taiwan, causing enormous life and economic losses. In this study, a system for rapid slope disaster information integration and assessment is proposed with the aim of providing information on landslide occurrence, failure mechanisms, and subsequent landslide-affected areas to the highway authority rapidly. The functionality of the proposed system is deployed into three units: (1) geohazard rapid report (GeoPORT I), (2) multidisciplinary geological survey report (GeoPORT II), and (3) site-specific landslide simulation report (GeoPORT III). After landslide occurrence, the seismology-based monitoring network rapidly provides the initial slope disaster information, including preliminary location, event magnitude, earthquake activity, and source dynamics, within an hour. Within 3 days of the landslide, a multidisciplinary geological survey is conducted to collect high-precision topographical, geological, and remote-sensing data to determine the possible failure mechanism. After integrating the aforementioned information, a full-scale three-dimensional landslide simulation based on the discrete element method is performed within 10 days to reveal the failure process and to identify the areas potentially affected by subsequent disasters through scenario modeling. Overall, the proposed system can promptly provide comprehensive and objective information to relevant authorities after the event occurrence for hazard assessment. The proposed system was validated using a landslide event in the Central Cross-Island Highway of Taiwan.
Acta Geotechnica - Slope engineering is a complex nonlinear system. It is difficult to respond with a high level of precision and efficiency requirements for stability assessment using conventional... 相似文献
Acta Geotechnica - Hydrophobized sands have been suggested as materials for hydraulic barriers in infrastructure. When placed at the interface ground–atmosphere, environmental factors such as... 相似文献
Sulfur speciation and concentration in geothermal water are of great significance for the research and utilization of the water resources. In most situations, it is necessary to determine the total sulfur in geothermal water. In this study, the method was established for the determination of determining total sulfur content — the inductively coupled plasma-atomic emission spectrometry (ICP-AES), with the wavelength of 182.034 nm selected in spectral line of sulfur. It was identified that the optimal working conditions of the ICP-AES instrument were 1 200 W for high frequency generator power 9 mm for vertical observation height, 0.30 MPa atomizer pressure, and 50 r/min analytical pump speed. The matrix interference of the method was eliminated by the matrix matching method. Using this method, sulfur detection limit and minimum quantitative detection limit were 0.028 mg/L and 0.110 mg/L, respectively, whilst the linear range was 0.0–100.0 mg/L. The recovery rate of sample was between 90.67% and 108.7%, and the relative standard deviation (RSD) was between 0.36% and 2.14%. The method was used to analyze the actual samples and the results were basically consistent with the industry standard method. With high analysis efficiency, the method has low detection limit and minimum quantitative detection limit, wide linear range, good precision and accuracy, and provides an important detection method for the determination of total sulfur in geothermal water. 相似文献