Combination of Dependent Realizations Within the Gradual Deformation Method

Gradual deformation is a parameterization method that reduces considerably the unknown parameter space of stochastic models. This method can be used in an iterative optimization procedure for constraining stochastic simulations to data that are complex, nonanalytical functions of the simulated variables. This method is based on the fact that linear combinations of multi-Gaussian random functions remain multi-Gaussian random functions. During the past few years, we developed the gradual deformation method by combining independent realizations. This paper investigates another alternative: the combination of dependent realizations. One of our motivations for combining dependent realizations was to improve the numerical stability of the gradual deformation method. Because of limitations both in the size of simulation grids and in the precision of simulation algorithms, numerical realizations of a stochastic model are never perfectly independent. It was shown that the accumulation of very small dependence between realizations might result in significant structural drift from the initial stochastic model. From the combination of random functions whose covariance and cross-covariance are proportional to each other, we derived a new formulation of the gradual deformation method that can explicitly take into account the numerical dependence between realizations. This new formulation allows us to reduce the structural deterioration during the iterative optimization. The problem of combining dependent realizations also arises when deforming conditional realizations of a stochastic model. As opposed to the combination of independent realizations, combining conditional realizations avoids the additional conditioning step during the optimization process. However, this procedure is limited to global deformations with fixed structural parameters.     

Origin of Gold—Bearing Fluid and Its Initiative Localization Mechanism in Xiadian Gold Deposit,Shandong Province

The composition of quartz inclusions and trace elements in ore indicate that gold-bearing fluid in the Xiadian gold deposit,Shandong Province,stemmed from both mantle and magma,belonging to a composite origin.Based on theoretical analysis and high temperature and high pressure experimental studies,gold-bearing fluid initiative localization mechanism and the forming environment of ore-host rocks are discussed in the present paper.The composite fluid extracted gold from rocks because of its expanding and injecting forces and injecting forces and flew through ore-conducive structures,leading to the breakup of rocks.The generation of ore-host faults and the precipitation of gold-bearing fluid occurred almost simultaneously.This study provides fur-ther information about the relationships between gold ore veins and basic-ultrabasic vein rocks and intermediate vein rocks,the spatial distribution of gold ore veins and the rules governing the migration of ore fluids.     

Ordovician Graptolite Rhabdosome Complication and Its Implications on Sea Level Changes

A total of four times of rhabdosome complication events, i.e., the lateral branching of graptolite stipes during the Late Middle Ordovician, the secondary branching of graptolite stipes at the earliest Upper Ordovician, the early Qiantangjiangian of Upper Ordovician and the middle Qiantangjiangian, respectively, is discussed in this paper. These events and other adaptation events demonstrate close relationships between a diverse graptolite fauna and sea level changes, and consequently can be employed to study sea level fluctuations. It is safe to conclude that the complication of rhabdosome started at the maximum flooding surface (MFS) and terminated at the beginning of regression.     

Heat flow and thermal modeling of the Yinggehai Basin, South China Sea

Geothermal gradients are estimated to vary from 31 to 43 °C/km in the Yinggehai Basin based on 99 temperature data sets compiled from oil well data. Thirty-seven thermal conductivity measurements on core samples were made and the effects of porosity and water saturation were corrected. Thermal conductivities of mudstone and sandstone range from 1.2 to 2.7 W/m K, with a mean of 2.0±0.5 W/m K after approximate correction. Heat flow at six sites in the Yinggehai Basin range from 69 to 86 mW/m², with a mean value of 79±7 mW/m². Thick sediments and high sedimentation rates resulted in a considerable radiogenic contribution, but also depressed the heat flow. Measurements indicate the radiogenic heat production in the sediment is 1.28 μW/m³, which contributes 20% to the surface heat flow. After subtracting radiogenic heat contribution of the sediment, and sedimentation correction, the average basal heat flow from basement is about 86 mW/m².Three stages of extension are recognized in the subsidence history, and a kinematic model is used to study the thermal evolution of the basin since the Cenozoic era. Model results show that the peak value of basal heat flow was getting higher and higher through the Cenozoic. The maximum basal heat flow increased from 65 mW/m² in the first stage to 75 mW/m² in the second stage, and then 90 mW/m² in the third stage. The present temperature field of the lithosphere of the Yinggehai Basin, which is still transient, is the result of the multistage extension, but was primarily associated with the Pliocene extension.     

Fluid permeability of sedimentary rocks in a complete stress–strain process

The permeability of sedimentary rocks during triaxial compression tests was investigated to relate it to the complete strain–stress process. It was found that the permeability was not constant, but varied with the stress and strain states in the rocks. Prior to the peak strength, the permeability decreases with increasing load. A dramatic increase in permeability occurs during the strain softening period. In the present study, in situ measurements of fluid flow and pressure in floor strata was carried out in a double longwall mining face in the Yangzhuang colliery. These measurements show that both the strata pressure and the position with respect to the mining face influence the hydrogeologic properties. The permeability increased in the floor strata behind the mining face because those mining induced fractures opened as the strata pressure decreased. To better understand this change in hydraulic behavior around the mining faces, 3-D numerical modeling was carried out. The model provides the general picture of the stress distribution and failure zone both in the floor and roof strata. The field and model results demonstrate the importance of changes in the stress and strain states on the hydrogeology of a site.     

Gold Occurrence and Ore Genesis,Yata Micro—Disseminated Gold Deposit,Guizhou,Southwest China

The mode of occurrence of gold in the Yata micro-disseminated gold deposit is ap-proached through chemical phase studies coupled with ore-dressing monitoring and micro-beam analysis.The results showed that gold occurred for the most part as ultra-microscopic particles adsorbed on the surfaces or fracture planes of pyrite and other sulphides.The proportions of gold of different occurrences were estimated solutions containing nanometer-sized gold particles were prepared following the hydrolysis-reduction procedure and the adsorption of nanometer-sized gold on ordinary sulphides and rocks was experimentally determined.It is evident that sulphides are good adsorbents of gold and this is consistent with geological observations.     

Factorial and indicator kriging methods using a geographic information system to delineate spatial variation and pollution sources of soil heavy metals

This study uses factorial and indicator kriging methods with a geographic information system (GIS), to overlay and delineate the variation and pollution sources of soil heavy metals in fields in the north of Changhua County, Taiwan. Accordingly, the spatial variation and pollution probability patterns of soil cadmium, chromium and copper are estimated to support further environmental monitoring, remediation and planning. The overlay maps of industrial plants, irrigation channels and kriging estimates, constitute a GIS. This reveals that the short- and long-range variations and soil pollution by Cd, Cr and Cu strongly corresponded to the locations of irrigation systems and industrial plants in the area of study. The maps also verify most locations of suspected pollution sources from the GIS database. Moreover, the probability spatial patterns estimated by indicator kriging, based on the pollution thresholds of Cd, Cr and Cu, were also highly correlated with irrigation channels and industrial plants. The GIS, with factorial and indicator kriging under different combinations of variations and pollution probabilities of soil Cd, Cr and Cu, provide alternative scenarios for delineating the areas that contain high variation and high pollution probability of these heavy metals, to enable decision makers to identify pollution sources, and to further investigate and remedy soil pollution.     

Dissolved and particulate trace metals and their partitioning in a hypoxic estuary: The Tanshui Estuary in Northern Taiwan

The distribution and partitioning of trace metals (Co, Cu, Fe, Mn, Ni, and Zn) between dissolved and particulate phases were studied in the Tanshui Estuary. The upper reach of the estuary is hypoxic and heavily polluted due to domestic and industrial discharges. The concentration ranges of dissolved and leachable particulate trace metals in the Tanshui Estuary were: Co: 0.3–6.1 nM, 1.8–18.6 mg kg⁻¹; Cu: 5–53 nM, 22–500 mg kg⁻¹; Fe: 388–3,364 nM, 1.08–6.67%; Mn: 57–2,914 nM, 209–1,169 mg kg⁻¹; Ni: 7–310 nM, 6–108 mg kg⁻¹; and Zn: 12–176 nM, 62–1,316 mg kg⁻¹; respectively. The dissolved concentrations of the metals were 2–35 times higher than the average values of the world river water. The distributions of dissolved and particulate studied metals, except Mn, in the estuary showed scattering, which could be attributed to the discharges from many industrial wastewater disposal works located in the upper tributaries. The daily input of dissolved metals from the disposal works to the Tanshui Estuary ranged from 0.1–0.4 tons. Dissolved Mn was nearly conservative in the region with salinity higher than 10 psu, while particulate Mn decreased in the region with salinity of 10–15 psu. The concentration increased significantly seawards, corresponding with the distribution of dissolved oxygen. The distribution coefficient (K_D) for Mn in the lower estuary was nearly three orders of magnitude higher than in the upper estuary. This phenomenon may be attributed to the diffusion of Mn from the anoxic sediment in the upper estuary and gradual oxidation into particulate Mn in the middle and lower estuary as the estuarine water became more oxygenated. The distribution coefficient for Cu decreased with increasing salinity. The percentages of trace metals bound by suspended particulate matter decreased in the following order: Fe>Zn, Cu>Co>Mn>Ni.     

1999年山西大同Ms 5.6地震的震源断层

大同震区先后在 1989、1991和 1999年发生MS >5地震 ,利用大同遥测地震台网的记录资料进行比较精确的地震序列震源定位 ,结合宏观烈度分布和震源机制解资料 ,详细地分析对比了 3次子序列的异同。结果显示 ,1999年MS5 .6地震的震源断层是走向NWW、长 16km、宽12km、埋深 5km以下、倾角近直立的左旋走滑断层。而前 2个子序列是NNE为主的右旋走滑断层活动所致 ,表明地震破裂方向发生了变化。这种 2个以上方向先后出现、并且强弱有别的地震破裂是普遍存在的 ,表明震源环境的复杂程度与地震序列的类型有关。虽然震区存在NE向的大王村断裂和NW向的团堡断裂 ,但目前没有证据说明震源断层和 2条构造断层连通。 3次子序列的震源断层都是走滑断层 ,也和 2条构造正断层有别。 1999年的子序列可能属于新破裂。     

2-D crustal structure of Changbaishan-Tianchi volcanic region determined by seismic traveltime inversion

IntroductionTrial-and-error forward modeling of wide-angle seismic reflection/refraction traveltimes for 2-D velocity structure is extremely time-consuming, even for experienced data interpreters. For wide-angle seismic reflection/refraction experiments that consist of numerous shots along a single line, it is quite difficult through repeated trial-and-error forward modeling to construct a 2-D model that fits the data within acceptable limits (Cerveny, et al, 1977; ZHANG, et al, 200 . In ad…