Assessing suitability of rural settlements using an improved technique for order preference by similarity to ideal solution

Land suitability assessment is a prerequisite phase in land use planning; it guides toward optimal land use by providing information on the opportunities and constraints involved in the use of a given land area. A geographic information system-based procedure, known as rural settlement suitability evaluation (RSSE) using an improved technique for order preference by similarity to ideal solution (TOPSIS), was adopted to determine the most suitable area for constructing rural settlements in different geographical locations. Given the distribution and independence of rural settlements, a distinctive evaluation criteria system that differed from that of urban suitability was established by considering the level of rural infrastructure services as well as living and working conditions. The unpredictable mutual interference among evaluation factors has been found in practical works. An improved TOPSIS using Mahalanobis distance was applied to solve the unpredictable correlation among the criteria in a suitability evaluation. Uncertainty and sensitivity analyses obtained via Monte Carlo simulation were performed to examine the robustness of the model. Daye, a resource-based city with rapid economic development, unsatisfied rural development, and geological environmental problems caused by mining, was used as a case study. Results indicate the following findings: 1) The RSSE model using the improved TOPSIS can assess the suitability of rural settlements, and the suitability maps generated using the improved TOPSIS have higher information density than those generated using traditional TOPSIS. The robustness of the model is improved, and the uncertainty is reduced in the suitability results. 2) Highly suitable land is mainly distributed in the northeast of the study area, and the majority of which is cultivated land, thereby leading to tremendous pressure on the loss of cultivated land. 3) Lastly, 12.54% of the constructive expansion permitted zone and 8.36% of the constructive expansion conditionally permitted zone are situated in an unsuitable area, which indicates that the general planning of Daye lacks the necessary verification of suitability evaluation. Guidance is provided on the development strategy of rural settlement patches to support decision making in general land use planning.     

Subduction/obduction rate in the North Pacific diagnosed by an eddy-resolving model

Ventilation in the North Pacifi c is examined using data from the eddy-resolving 1/12° global HYbrid Coordinate Ocean Model(HYCOM) and Quik SCAT wind stress data. For the period January 2004 to December 2006 and area 20°–40°N, the total annual subduction rate is estimated at 79 Sv, and the obduction rate 41 Sv. Resolving the small-scale and high-frequency components of the eddy fi eld can increase the subduction rate by 42 Sv, and obduction by 31 Sv. Lateral induction is the dominant contributor to enhancement of subduction/obduction, and temporal change of mixed layer depth has a secondary role. Further analysis indicates that the high-frequency components of the eddy fi eld, especially those with timescale shorter than 10 days, are the most critical factor enhancing subduction/obduction.     

Analysis of phenotypic and genetic parameters for growthrelated traits in the half smooth tongue sole, <Emphasis Type="Italic">Cynoglossus semilaevis</Emphasis>

Phenotypic and genetic parameters for growth-related traits in the half-smooth tongue sole, Cynoglossus semilaevis, were estimated in 22 full-sib families produced by normal and neo-male breeding stocks. As phenotypic males with female genotypes, neo-males are harmful in C. semilaevis aquaculture because they reduce overall production. The present study evaluated the difference in the growth-related traits: total length (TL), body weight (BW) and square root of body weight (SQ_BW) at the age of 570 days between normal and neo-male offspring (neo-males used as male parents). The difference in the proportion of females between normal and neo-male offspring was also assessed. Based on the linear mixed model, restricted maximum likelihood (REML) and best linear unbiased prediction (BLUP) were used to estimate various (co)variance components and estimated breeding values (EBVs) of growth-related traits. As a result, all the mean values of the three studied traits were significantly larger in normal offspring than in neo-male offspring. Additionally, the female proportion was significantly larger in normal offspring than in neo-male offspring. Heritability was 0.128±0.066 2 for TL, 0.128±0.065 5 for BW and 0.132±0.062 9 for SQ_BW, all of which were low level heritabilities. The correlation coefficients of EBVs and phenotypic values of the target traits were 0.516 for TL, 0.524 for BW and 0.506 for SQ_BW, all of which were highly significant (P <0.01). Genetic correlations among TL, BW and SQ_BW were positive high (0.921–0.969) and higher than those of phenotype (0.711–0.748), both of which had low standard errors (0.063–0.123 for genotype, and 0.010–0.018 for phenotype). Compared with normal offspring, neo-male offspring have lower breeding values for each studied trait through EBVs comparison. Therefore, neo-male offspring should not be used as broodstock in a C. semilaevis breeding programs.     

Pharmacokinetics and acetylation of sulfamethoxazole in turbot <Emphasis Type="Italic">Scophthalmus maximus</Emphasis> after intravascular administration

The pharmacokinetic profiles and sulfamethoxazole (SMX) acetylation process in turbot reared at 18°C were investigated. Either SMX (parent drug) or its acetylized metabolite, N₄-acetylsulfamethoxazole (AcSMX), was administered intravascularly to turbot at a dosage of 50 mg/kg BW. Serum concentrations of the parent drug and its metabolite were both measured by HPLC, and the changes in concentration over time were analyzed in two- and non-compartment models because SMX treatment produced multiple peaks. The results demonstrated that the elimination half-life of the parent drugs, SMX and AcSMX, were 159.2 and 5.9 h, respectively. The apparent volume of distribution was 0.2 and 0.8 L/kg, and the clearance was 0.038 and 0.222 L/(h·kg), for SMX and AcSMX, respectively. SMX acetylation in turbot was 2.8%, and the deacetylation of AcSMX was 0.2%. These findings may be useful in optimizing SMX dosage regimens in turbot aquaculture.     

Contribution of phytoliths to total biogenic silica volumes in the tropical rivers of Malaysia and associated implications for the marine biogeochemical cycle

The contribution of phytoliths to total biogenic silica (BSi) volumes in rivers worldwide, and the associated implications for the biogeochemical cycle, require in-depth study. Based on samples from rivers in Peninsular Malaysia, this project investigated the source and characteristics of BSi found in Asian tropical rivers, as well as the process of reverse weathering taking place in these fluvial systems. Results indicated that BSi samples collected in sediments consisted of phytolith, diatom and sponge spicules. Phytoliths, predominantly of the elongate form, comprised 92.8%–98.3% of BSi in the Pahang River. Diatom BSi in this river consisted mainly of pennatae diatoms, but represented a relatively small proportion of the total BSi volume. However, diatom BSi (predominantly of the Centricae form) was more prevalent in the Pontian and Endau Rivers with shares of 68.8% and 79.3% of the total BSi volumes, respectively, than Pahang River. Carbon contents of the BSi particulates ranged from 1.85% to 10.8% with an average of 4.79%. These values are higher than those recorded in other studies to date, and indicate that BSi plays a major role in controlling permanent carbon burial. This study suggests that phytoliths from terrestrial plants are the primary constituents of BSi in the rivers of Peninsular Malaysia, and therefore represent a significant proportion of the coastal silica budget.     

Significant population genetic structure detected in the rock bream <Emphasis Type="Italic">Oplegnathus fasciatus</Emphasis> (Temminck &amp; Schlegel, 1844) inferred from fluorescent-AFLP analysis

Oplegnathus fasciatus (rock bream) is a commercial rocky reef fish species in East Asia that has been considered for aquaculture. We estimated the population genetic diversity and population structure of the species along the coastal waters of China using fluorescent-amplified fragment length polymorphisms technology. Using 53 individuals from three populations and four pairs of selective primers, we amplified 1 264 bands, 98.73% of which were polymorphic. The Zhoushan population showed the highest Nei’s genetic diversity and Shannon genetic diversity. The results of analysis of molecular variance (AMOVA) showed that 59.55% of genetic variation existed among populations and 40.45% occurred within populations, which indicated that a significant population genetic structure existed in the species. The pairwise fixation index F _st ranged from 0.20 to 0.63 and were significant after sequential Bonferroni correction. The topology of an unweighted pair group method with arithmetic mean tree showed two significant genealogical branches corresponding to the sampling locations of North and South China. The AMOVA and STRUCTURE analyses suggested that the O. fasciatus populations examined should comprise two stocks.     

An integrative study of larval organogenesis of American shad <Emphasis Type="Italic">Alosa sapidissima</Emphasis> in histological aspects

We describe organogenesis at a histological level in American shad (Alosa sapidissima) larvae from 0 until 45 days after hatching (DAH). Larval development was divided into four stages based on the feeding mode, external morphological features, and structural changes in the organs: stage 1 (0–2 DAH), stage 2 (3–5 DAH), stage 3 (6–26 DAH) and stage 4 (27–45 DAH). At early stage 2 (3 DAH), American shad larvae developed the initial digestive and absorptive tissues, including the mouth and anal opening, buccopharyngeal cavity, oesophagus, incipient stomach, anterior and posterior intestine, differentiated hepatocytes, and exocrine pancreas. The digestive and absorptive capacity developed further in stages 2 to 3, at which time the pharyngeal teeth, taste buds, gut mucosa folds, differentiated stomach, and gastric glands could be observed. Four defined compartments were discernible in the heart at 4 DAH. From 3 to 13 DAH, the excretory systems started to develop, accompanied by urinary bladder opening, the appearance and development of primordial pronephros, and the proliferation and convolution of renal tubules. Primordial gills were detected at 2 DAH, the pseudobranch was visible at 6 DAH, and the filaments and lamellae proliferated rapidly during stage 3. The primordial swim bladder was first observed at 2 DAH and started to inflate at 9 DAH; from then on, it expanded constantly. The spleen was first observed at 8 DAH and the thymus was evident at 12 DAH. From stage 4 onwards, most organs essentially manifested an increase in size, number, and complexity of tissue structure.     

The morphological characteristics of gully systems and watersheds in Dry-Hot Valley,SW China

Gully systems and watersheds are geomorphic units with clear boundaries that are relatively independent of basin landscapes and play an important role in natural geography. In order to explore the morphological characteristics of gully systems and watersheds in the Dry-Hot Valley [South West (SW) China], gullies are interpreted from online Google images with high resolution and watersheds are extracted from digital elevation model at a scale of 1:50,000. The results show that: (1) There are 17,382 gullies (with a total area of 1141.66 km²) and 42 watersheds in the study area. (2) The average gully density of the study area (D) is 4.29 km/km², gully frequency (F) is 14.39 gullies/km², the branching ratio (B) is 5.13, the length ratio (L) is 3.12, and the coefficient of the main and tributary gullies (M) is 0.06. The degree of gully erosion is strong to extremely strong, the main development intensity of gully erosion ranges from intense to moderate, and the type of gully system is tributary. (3) The watershed areas (A) are between 0.39 and 96.43 km², the relief ratio (R) is from 0.10 to 0.19, the circularity ratio (C) is from 0.30 to 0.83, the texture ratio (T) is from 0.82 to 39.35, and the dominant geomorphological texture type is fine. (4) There is a quantitative relationship between F and D:F?=?0.624D² (R?=0.84) and T is closely related to D, F, M (R²?>?0.7). A, R and C are related to M (R²?>?0.5). The development of gully systems is the result of coupling effects between multiple factors. In this area, the degree of erosion and the condition of the main and tributary gullies can be controlled by the degree of topographic breakage in the watershed, which provides some theoretical basis for the evaluation of gully erosion by the latter. In addition, the scale, relief, and shape have a significant impact on the locations of the main and tributary gullies. For tributary gullies, attention should be paid to the interception and control of runoff and sediment in the small confluence branches in order to prevent gully expansion and head advance. These features can inform the development of targeted measures for the control of soil erosion.     

Theoretical calculation of equilibrium Mg isotope fractionation between silicate melt and its vapor

Isotope fractionation during the evaporation of silicate melt and condensation of vapor has been widely used to explain various isotope signals observed in lunar soils, cosmic spherules, calcium–aluminum-rich inclusions, and bulk compositions of planetary materials. During evaporation and condensation, the equilibrium isotope fractionation factor (α) between high-temperature silicate melt and vapor is a fundamental parameter that can constrain the melt’s isotopic compositions. However, equilibrium α is difficult to calibrate experimentally. Here we used Mg as an example and calculated equilibrium Mg isotope fractionation in MgSiO₃ and Mg₂SiO₄ melt–vapor systems based on first-principles molecular dynamics and the high-temperature approximation of the Bigeleisen–Mayer equation. We found that, at 2500 K, δ²⁵Mg values in the MgSiO₃ and Mg₂SiO₄ melts were 0.141?±?0.004 and 0.143?±?0.003‰ more positive than in their respective vapors. The corresponding δ²⁶Mg values were 0.270?±?0.008 and 0.274?±?0.006‰ more positive than in vapors, respectively. The general \(\alpha - T\) equations describing the equilibrium Mg α in MgSiO₃ and Mg₂SiO₄ melt–vapor systems were: \(\alpha_{{{\text{Mg}}\left( {\text{l}} \right) - {\text{Mg}}\left( {\text{g}} \right)}} = 1 + \frac{{5.264 \times 10^{5} }}{{T^{2} }}\left( {\frac{1}{m} - \frac{1}{{m^{\prime}}}} \right)\) and \(\alpha_{{{\text{Mg}}\left( {\text{l}} \right) - {\text{Mg}}\left( {\text{g}} \right)}} = 1 + \frac{{5.340 \times 10^{5} }}{{T^{2} }}\left( {\frac{1}{m} - \frac{1}{{m^{\prime}}}} \right)\), respectively, where m is the mass of light isotope ²⁴Mg and m′ is the mass of the heavier isotope, ²⁵Mg or ²⁶Mg. These results offer a necessary parameter for mechanistic understanding of Mg isotope fractionation during evaporation and condensation that commonly occurs during the early stages of planetary formation and evolution.