Using 4C OBS to reveal the distribution and velocity attributes of gas hydrates at the northern continental slope of South China Sea

To investigate the distribution and velocity attributes of gas hydrates in the northern continental slope of South China Sea, Guangzhou Marine Geological Survey conducted four-component (4C) ocean-bottom seismometer (OBS) surveys. A case study is presented to show the results of acquiring and processing OBS data for detecting gas hydrates. Key processing steps such as repositioning, reorientation, PZ summation, and mirror imaging are discussed. Repositioning and reorientation find the correct location and direction of nodes. PZ summation matches P- and Z-components and sums them to separate upgoing and downgoing waves. Upgoing waves are used in conventional imaging, whereas downgoing waves are used in mirror imaging. Mirror imaging uses the energy of the receiver ghost reflection to improve the illumination of shallow structures, where gas hydrates and the associated bottom-simulating reflections (BSRs) are located. We developed a new method of velocity analysis using mirror imaging. The proposed method is based on velocity scanning and iterative prestack time migration. The final imaging results are promising. When combined with the derived velocity field, we can characterize the BSR and shallow structures; hence, we conclude that using 4C OBS can reveal the distribution and velocity attributes of gas hydrates.     

中深层地热能同轴套管换热器储能发电系统热力学性能分析

地热能是一种极具潜力的可再生能源,已引起广泛关注。在深部地热储层中,人工改造后形成的复杂裂缝网络为热提取提供了重要通道,裂缝空间分布将会直接影响热提取率。为探究裂缝不同空间分布对采热性能的影响,以幂律分布的裂缝网络为基础,采用TOUGH2MP-FLAC^3D框架下建立的THM耦合模型,系统研究不同裂缝长度指数(a)、密度(β)的裂缝网络对新型增强型地热系统(CO₂-EGS)采热性能的影响。并以热突破时间、EGS寿命、产热率与总产热能以及产热效率5种评价指标对储层热性能进行详细评估。结果表明,在恒速注入的情况下,裂缝长度指数a越大,长裂缝占比越小,注采井之间形成的贯穿裂缝数量越少,裂缝宽度越大,致使生产温度、产热率降低越快,更早达到热突破,从而缩短EGS寿命,降低总产热能。当a相同时,裂缝密度β越大,裂缝数量越多,生产温度与产热率降低越慢,延长热突破时间与EGS寿命,提高产热量。热突破时间最高可增加15.65 a,EGS寿命增加约10 a,总产热能增加约22.77%。而当长度指数a增长时,热突破时间最多缩短了13.1 a,总产热能降低20.8%。因此,长裂缝占比提高和裂缝密度增加有助于提高注采井之间裂缝的连通性,促进流体对流换热,更好地发挥裂缝在热开采中的作用,提高采热量。研究结果为干热岩造缝增渗改造提供一定的理论指导。

     

基于累积相似度表面的空间权重矩阵构建方法

将地理要素相似度定义为属性相似度与空间相似度,提出累积相似度表面的概念,引入曲线演化理论和快速行进方法生成累积相似度表面,构建空间权重矩阵。通过趋势面模拟数据与ASTER GDEM数字高程模型数据的实验分析证明,相比于利用欧氏距离等距离测度方法,通过累积相似度表面构建的空间权重矩阵综合考虑了地理要素的属性相似度与空间相似度,体现了地理要素的局部空间特征,能够更为准确地描述地理要素空间特征变化趋势。     

一种地类图斑符号配置算法

地图符号配置是地图可视化的重要组成部分,传统的土地利用现状图制图中,地类图斑的符号化通过填充法或填绘法实现,但是这些方法不能解决符号的空间冲突问题。本文从地图认识的角度出发,归纳地类图斑的符号化规则,提出了一种地类符号配置算法,并利用C#语言、Arc Engine开发接口实现了该算法。实验结果表明,算法较好解决了地类符号与其他地物要素压盖问题。     

塔里木盆地克拉苏构造带巴什基奇克组地层水化学特征及流体成因

地层水化学特征及流体成因的分析对油气成藏的研究具有重要意义,对库车坳陷克拉苏构造带的地层水化学特征及流体成因的研究有助于油气藏的勘探开发。塔里木盆地库车坳陷克拉苏构造带构造特征复杂,地层水化学特征及流体系统缺乏系统研究。为了明确克拉苏构造带地层水化学特征及其流体系统,对地层水的溶解性总固体(TDS)、离子比例系数及压力分布特征进行了分析。研究结果表明：克拉苏构造带地层水以高TDS的卤水为主(平均值为154.92 g/L),按照苏林分类主要为CaCl₂型,按照舒卡列夫分类为Cl-Na型和Cl-Na·Ca型,为典型的沉积埋藏水。地层水的脱硫系数较低(平均值小于1.2)、变质系数较高(平均值大于6),表明地层的封闭性较好,地层水经历了较强的水岩反应。参照地层压力场、岩性特征及地层水特征,将库车凹陷克拉苏构造带划分为第四系—新近系、古近系、白垩系、侏罗系及下伏地层四套流体系统。结合研究区岩性组成、构造演化特征及地层水化学特征分析,明确了白垩系巴什基奇克组地层水的成因为白垩系原始沉积水与侏罗系烃源岩生烃时排出的有机物转化流体、沉积水及古近系膏盐层高盐度流体的混合。     

内蒙古呼伦湖表层沉积物的矿物组成和沉积速率

呼伦湖表层沉积物的取样和分析表明,沉积物主要由碎屑矿物和自生碳酸盐矿物组成。碳酸盐含量为10％—18％。碳酸盐沉积作用与湖水的较高含盐量和碳酸盐过饱和度有关。湖泊中心HL8号柱样的~(210)Pb测定结果是,10cm以上平均沉积速率0.25cm/a,10—12cm为0.05cm/a。60年代开始随湖泊水位上涨沉积物输入量迅速加大。     

基于不同雨型的裴河小流域山洪灾害临界雨量分析

临界雨量是山洪灾害预警的重要指标,为分析小流域雨型对临界雨量的影响,首先对流域降雨过程按照雨峰出现位置的不同进行归类和划分,定性分析流域常出现的各种典型雨型;在此基础上,采用PilgrimCordery法定量确定流域各种典型雨型的时程分配,并通过试算法计算其相应的临界雨量;利用流域近期发生的成灾洪水,采用临界雨量偏离度指标进一步分析论证雨型对临界雨量的影响。以河南省新县裴河典型小流域为实例进行应用研究,结果表明:设计雨型不能完全代表该流域的降雨类型,其属于雨峰偏后式雨型,由此确定的临界雨量与该流域常出现的雨峰偏前式雨型临界雨量相差33%,与多峰雨型临界雨量差异较大,相差43%。实时预警时,根据实时雨型类型,采用相应的临界雨量,可以提高山洪灾害预警预报水平。     

电刺激诱导栉孔扇贝雌核发育的相关参数的筛选

电刺激可诱导卵子雌核发育,但在海洋生物中尚无报道。为获得电刺激诱导栉孔扇贝雌核发育的最佳条件,采用正交设计的方法,分别研究了电场强度、电容、脉冲次数、卵子密度及缓冲液种类对诱导效果的影响。结果表明:(1)不同缓冲液的诱导效果差异不显著(P>0.05),但甘露醇缓冲液的诱导效果优于Zimmerman氏缓冲液和山梨醇缓冲液;最佳卵子密度为11.25×104个/mL,场强的最适范围为1.00～1.75kV/cm。最优电刺激诱导条件组合是:0.30mol/L甘露醇缓冲液,卵子密度11.25×104个/mL,脉冲强度1.20kV/cm,电容3μF,2次电脉冲。(2)应用优化后的电刺激参数诱导雌核发育,获得了最佳的诱导效果,得到的卵裂率为28.16%,胚胎存活率为98.37%。本研究首次成功应用电刺激法诱导了栉孔扇贝的雌核发育,并得到了单倍体胚胎,初步建立了栉孔扇贝中该诱导法的参数体系。     

Detection of the end point temperature of thermal denatured protein in fish and chicken meat through SDS-PAGE electrophoresis

Sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) was applied in the detection of the end point temperature (EPT) of thermal denatured protein in fish and meat in this study. It was also used in studying the thermal denatured temperature range of proteins in salmon and chicken meat. The results show that the temperature ranges of denatured proteins were from 65 ℃ to 75 ℃ , and these temperature ranges were influenced by the processing methods. Through SDS-PAGE, the features of repeated he...     

Microstructure characteristics and forming environment of late Quaternary Period loess in the Loess Plateau of China

Since the late Quaternary Period, the rapid rising of the northeastern Qinghai-Tibetan Plateau has greatly changed the East Asian climate and formed different regional monsoon climates. Various microstructures of the loess in northern China have formed under a variety of climatic conditions. The scanning electron microscope (SEM) and energy spectrum analysis are used in this paper to study the relationship between the indexes of loess microstructures and the forming climates, and the indexes include the diameter of sand grains, Ca/Fe value and the characteristic shapes of the loess from SEM microstructures pictures. In terms of their respective climatic circumstances, the major microstructures of regional loess may be classified into nine categories according to their forms and particle sizes, such as loess formed in near-sand source, loess of granule sand dropping, and loess formed in hot and rainy places, i.e. with the loess SEM pictures, climates of about 15 ka b.p. in different places may be evaluated. In conclusion, the clear and distinguishable loess microstructures and their indexes in the Loess Plateau of China can also deduce the evolution of climate, such as warm or cold and wet or dry, and even sandstorm activities when the loess is deposited.