A 16 ka climate record deduced from δ^13C and C/N ratio in Qinghai Lake sediments, northeastern Tibetan Plateau

1 INTRODUCTION δ13C in organic matters from lacustrine sedi- ments varies with several factors including aquatic plants, vegetation type in the catchment, atmos- pheric CO2 concentration, climate (temperature and precipitation), and properties of water, …     

基于SilverLight和REST的富网络地理信息系统框架设计

 在WebGIS的快速发展过程中,其架构方法和实现技术的研究一直是人们关注的热点。本文针对传统WebGIS开发复杂度高、交互体验性贫乏、运行效率低等不足,在对RIA/SilverLight和REST技术的研究基础上,以整体结构模块化,开发行为统一化,代码可复用及经验可复用的指导思路下,提出由空间数据服务器(数据访问层DAL)、GIS服务和Web服务服务器(业务逻辑层BLL)及部署有SilverLight插件的浏览器(表现层UI)组成的3层架构式富网络地理信息系统,并阐述了数据层中空间属性数据库的设计和建立步骤以及优化经验,分析了业务逻辑层的构成和运行机制,为提高系统开发效率使用MVVM(Model-View-View Model,模型－视图－视图模型)设计模式,将表现层分为前端用户界面和后台逻辑两部分,并描述了用户熟悉的Office Ribbon设计样式的开发方法,说明了后台逻辑架构组件各自功能及通讯路径。最后,为验证此框架能够有效提高系统开发效率、丰富用户体验和改善系统运行性能表现等优势,利用SilverLight(C#)实现了应用实例——LightGIS。系统开发和运行实验表明,该框架能够很好地达成以下目的:(1)实现优美的用户操作界面和丰富的互操作性体验;(2)提供平滑、流畅的地图服务和高响应性空间分析;(3)具备优秀的系统可扩展潜力和可配置性。     

定点潮汐形变观测与GPS大地测量

论述了我国定点潮汐形变观测与GPS在观测周期，物理量，频域，实测精度，监测优势者方面的异同，认为定点潮汐形变观测是测震学与大地测量（含GPS）的必要补充，介绍了我国定点潮汐形变观测技术的发展与台网观测技术，以及它在我国10多次中强震测报中的应用。     

胶东招掖地区滦家河花岗岩锆石U-Pb年代学、岩石地球化学及其地质意义

滦家河花岗岩体是胶东金矿区内的重要岩体,其岩性主要为中粗粒黑云母二长花岗岩。锆石LA—ICP—MS U—Pb年代学研究表明,滦家河花岗岩形成于149±2 Ma,属晚侏罗世。滦家河花岗岩Si O2的含量为64.58%~72.05%,相对较高;A/CNK值为0.98~1.22。微量元素特征显示,滦家河花岗岩富集大离子亲石元素(LILE)Rb、Ba、K,强烈亏损高场强元素(HFSE)Nb、Ta、Ti、P;稀土元素特征显示轻稀土强烈富集,重稀土极度亏损,轻微正铕异常。岩石的Nb/La和Nd/Th比值显示壳源花岗岩的特征,Rb/Sr比值暗示可能有部分幔源物质混入。结合区域地质分析认为,侏罗纪开始,太平洋板块向欧亚大陆的俯冲引发大规模幔源岩浆底侵,导致地壳物质部分熔融形成滦家河花岗岩。     

双向近场地震作用下HDR隔震梁桥地震响应研究

以HDR隔震梁桥多自由度（MDOF）模型和等效双线性单自由度（SDOF）模型为研究对象，以典型近场地震动作为输入，研究HDR支座双向耦合效应对HDR隔震梁桥地震响应的影响。研究结果表明:不考虑双向耦合效应的HDR支座滞回曲线呈典型双线性；考虑双向耦合效应的HDR支座滞回曲线面积小于不考虑双向耦合效应的HDR支座滞回曲线面积。不考虑双向耦合效应的顺桥向HDR支座位移峰值d_b大于考虑双向耦合效应时，但横桥向的结果相反。近场地震作用下，对梁桥进行HDR支座隔震设计时，忽略双向耦合效应计算得到的墩底剪力峰值和弯矩峰值均偏于保守。可忽略HDR支座双向耦合效应对HDR隔震梁桥近场地震能量的影响。     

一种用于海底类型聚类的新方法

By using sonar imaging, this paper presents a new algorithm for the clustering of seabed types based on the self-organizing feature maps （SOFM） neural network. The theory as well as data processing is studied in detail. Some valuable conclusions and suggestions are given     

渗流井合理竖井降深确定

通过采用单位面积河流在单位水头差作用下的渗漏量来表征河流渗漏能力,建立渗流井取水理想模型,分别计算了在不同河流渗漏能力和含水层渗透性能条件下,竖井降深对渗流井出水量的影响.建立渗流井取水非稳定流模型,计算了在前期稳定竖井降深不同条件下,河流断流后渗流井出水量衰减过程及竖井降深发展过程.提出渗流井合理竖井降深应根据河流与地下水是否脱节以及含水层渗透性能,在岸边渗流井中部及一侧各布设一个观测孔,根据观测孔水位进行确定.对于含水层渗透性能较强地区,渗流井竖井降深应使得渗流井范围内地下水位与河流脱节,但高于辐射孔顶面;对于含水层渗透性能较差地区,渗流井竖井降深应使得侧部观测孔水位接近河床底面或刚出现脱节.     

2005年1月18日乳山ML4.3地震序列

对2005年1月18日乳山ML4.3地震序列特征及烈度分布进行了介绍, 认为乳山ML4.3地震序列是一次能量衰减较快、频度起伏衰减的主-余型地震序列, 序列本身不具有明显的前兆意义.     

A new approach of selecting real input ground motions for seismic design: The most unfavourable real seismic design ground motions

This paper presents a new way of selecting real input ground motions for seismic design and analysis of structures based on a comprehensive method for estimating the damage potential of ground motions, which takes into consideration of various ground motion parameters and structural seismic damage criteria in terms of strength, deformation, hysteretic energy and dual damage of Park & Ang damage index. The proposed comprehensive method fully involves the effects of the intensity, frequency content and duration of ground motions and the dynamic characteristics of structures. Then, the concept of the most unfavourable real seismic design ground motion is introduced. Based on the concept, the most unfavourable real seismic design ground motions for rock, stiff soil, medium soil and soft soil site conditions are selected in terms of three typical period ranges of structures. The selected real strong motion records are suitable for seismic analysis of important structures whose failure or collapse will be avoided at a higher level of confidence during the strong earthquake, as they can cause the greatest damage to structures and thereby result in the highest damage potential from an extended real ground motion database for a given site. In addition, this paper also presents the real input design ground motions with medium damage potential, which can be used for the seismic analysis of structures located at the area with low and moderate seismicity. The most unfavourable real seismic design ground motions are verified by analysing the seismic response of structures. It is concluded that the most unfavourable real seismic design ground motion approach can select the real ground motions that can result in the highest damage potential for a given structure and site condition, and the real ground motions can be mainly used for structures whose failure or collapse will be avoided at a higher level of confidence during the strong earthquake. Copyright © 2007 John Wiley & Sons, Ltd.     

Ensemble retrieval of atmospheric temperature profiles from AIRS

ABSTRACT Satellite-based observations provide great opportunities for improving weather forecasting. Physical retrieval of atmo spheric profiles from satellite observations is sensitive to the uncertainty of the first guess and other factors. In order to improve the accuracy of the physical retrieval, an ensemble methodology was developed with an emphasis on perturbing the first guess. In the methodology, a normal probability density function （PDF） is used to select the optimal profile from the ensemble retrievals. The ensemble retrieval algorithm contains four steps： （1） regression retrieval for original first guess; （2） perturbation of the original first guess to generate new first guesses （ensemble first guesses）; （3） using the ensemble first guesses and nonlinear iterative physical retrieval to generate ensemble physical results; and （4） the final optimal profile is selected from the ensemble physical results by using PDE Temperature eigenvectors （EVs） were used to generate the pertur- bation and generate the ensemble first guess. Compared with the regular temperature profile retrievals from the Atmospheric InfraRed Sounder （AIRS）, the ensemble retrievals RMSE of temperature profiles selected by the PDF was reduced between 150 and 320 hPa and below 400 hPa, with a maximum improvement of 0.3 K at 400 hPa. The bias was also reduced in many layers, with a maximum improvement of 0.69 K at 460 hPa. The combined optimal （CombOpt） profile and a mean optimal （MeanOpt） profile of all ensemble physical results were improved below 150 hPa. The MeanOpt profile was better than the CombOpt profile, and was regarded as the final optimal （FinOpt） profile. This study lays the foundation for improving temperature retrievals from hyper-spectral infrared radiance measurements.