Hydrogeology of the vicinity of Homestake mine, South Dakota, USA

The former Homestake mine in South Dakota (USA) cuts fractured metamorphic rock over a region several km² in plan, and plunges to the SE to a depth of 2.4 km. Numerical simulations of the development and dewatering of the mine workings are based on idealizing the mine-workings system as two overlapping continua, one representing the open drifts and the other representing the host rock with hydrologic properties that vary with effective stress. Equating macroscopic hydrologic properties with characteristics of deformable fractures allows the number of parameters to be reduced, and it provides a physically based justification for changes in properties with depth. The simulations explain important observations, including the co-existence of shallow and deep flow systems, the total dewatering flow rate, the spatial distribution of in-flow, and the magnitude of porosity in the mine workings. The analysis indicates that a deep flow system induced by ~125 years of mining is contained within a surface-truncated ellipsoid roughly 8 km by 4 km in plan view and 5.5 km deep with its long-axis aligned to the strike of the workings. Groundwater flow into the southern side of the workings is characterized by short travel times from the ground surface, whereas flow into the northern side and at depth consists of old water removed from storage.     

High-pressure and high-temperature Raman spectroscopic study of hydrous wadsleyite (β-Mg2SiO4)

In situ Raman spectra of hydrous wadsleyite (β-Mg₂SiO₄) with ~1.5 wt% H₂O, synthesized at 18 GPa and 1,400°C, have been measured in an externally heated diamond anvil cell up to 15.5 GPa and 673 K. With increasing pressure (at room temperature), the three most intense bands at ~549, 720 and 917 cm⁻¹ shift continuously to higher frequencies, while with increasing temperature at 14.5 GPa, these bands generally shift to lower frequencies. The temperature-induced frequency shifts at 14.5 GPa are significantly different from those at ambient pressure. Moreover, two new bands at ~714 and ~550 cm⁻¹ become progressively significant above 333 and 553 K, respectively, and disappear upon cooling to room temperature. No corresponding Raman modes of these two new bands were reported for wadsleyite at ambient conditions, and they are thus probably related to thermally activated processes (vibration modes) at high-pressure and temperature conditions.     

Structural,lithological, and geochemical constraints on the dynamic magma plumbing system of the Jinchuan Ni–Cu sulfide deposit,NW China

Eastern and western portions of the Jinchuan ultramafic intrusion have previously been interpreted as dismembered segments of a single elongate intrusion by late faults. However, the different stratigraphic sequences of the two portions indicate that they are originally two separate intrusions, referred to as Eastern and Western intrusions in this study. The Eastern intrusion is characterized by a concentric distribution of rock types with a core of sulfide dunite enveloped by lherzolite, whereas the Western intrusion is composed of the Upper and Lower units, interpreted as magmatic mega cycles with regular variations in lithology and chemistry. In the Western intrusion, the Upper unit consists of fine-grained dunite, lherzolite, and pyroxenite from its base to its top. The MgO contents decrease upward from the dunites (42–45 wt.%) to the lherzolites (36–41 wt.%), while Al₂O₃ and incompatible elements increase upward. In contrast, the Lower unit consists of coarse-grained dunites and lherzolites containing 37–40 and 28–35 wt.% MgO, respectively. Sharp contacts between the Upper and Lower units and fine-grained dunite xenoliths at the top of the Lower unit indicate that the Lower unit intruded along the base of the Upper unit. Disseminated and net-textured sulfides primarily occur in the Lower unit and comprise the no. 24 ore body. Very low S contents (<100 ppm) of the wall rocks at Jinchuan indicate that they were not the source of S causing sulfide immiscibility. Sulfide segregation more likely occurred in deep-seated magma chambers, and sulfides were deposited in the Western intrusion when sulfide-bearing magmas passed through the intrusion. In contrast, the Eastern intrusion was formed by injections of sulfide-free and sulfide-bearing olivine-crystal mushes, respectively, from another deep-seated staging magma chamber. The Eastern and Western intrusions and the deep-seated magma chambers comprise a complicated magma plumbing system at Jinchuan. Normal faults played a significant role in the formation of the magma plumbing system and provided pathways for the magmas.     

A waveguide-based flexible CO2-laser heating system for diamond-anvil cell applications

Fiber-based laser heating systems offer high flexibility and are increasingly used in high-pressure/high-temperature research. Previous fiber-based laser heating systems were based on lasers delivering radiation with 1-μm wavelength that show unfavorable heating characteristics for many sample materials. We report on the development and first experiments of a waveguide (fiber)-based CO₂-laser heating system that can be used in a flexible manner for high-temperature research and for high-pressure/temperature experiments when combined with diamond-anvil cells. The waveguide-based CO₂-laser heating system allows convenient heating of optically transparent samples without the need for adding an additional laser absorber. In a pilot experiment, the flexible heating system has been installed on a Brillouin scattering system to measure high-temperature sound-wave velocities in single-crystal MgO. The waveguide-based CO₂-laser heating system offers perspectives for a variety of scientific applications, most importantly those that require the use of synchrotron facilities where space is limited and flexible solutions are required.     

Trace and minor elements in sphalerite: A LA-ICPMS study

Sphalerite is an important host mineral for a wide range of minor and trace elements. We have used laser-ablation inductively coupled mass spectroscopy (LA-ICPMS) techniques to investigate the distribution of Ag, As, Bi, Cd, Co, Cu, Fe, Ga, Ge, In, Mn, Mo, Ni, Pb, Sb, Se, Sn and Tl in samples from 26 ore deposits, including specimens with wt.% levels of Mn, Cd, In, Sn and Hg. This technique provides accurate trace element data, confirming that Cd, Co, Ga, Ge, In, Mn, Sn, As and Tl are present in solid solution. The concentrations of most elements vary over several orders of magnitude between deposits and in some cases between single samples from a given deposit. Sphalerite is characterized by a specific range of Cd (typically 0.2-1.0 wt.%) in each deposit. Higher Cd concentrations are rare; spot analyses on samples from skarn at Baisoara (Romania) show up to 13.2 wt.% (Cd²⁺ ↔ Zn²⁺ substitution). The LA-ICPMS technique also allows for identification of other elements, notably Pb, Sb and Bi, mostly as micro-inclusions of minerals carrying those elements, and not as solid solution. Silver may occur both as solid solution and as micro-inclusions. Sphalerite can also incorporate minor amounts of As and Se, and possibly Au (e.g., Magura epithermal Au, Romania). Manganese enrichment (up to ∼4 wt.%) does not appear to enhance incorporation of other elements. Sphalerite from Toyoha (Japan) features superimposed zoning. Indium-sphalerite (up to 6.7 wt.% In) coexists with Sn-sphalerite (up to 2.3 wt.%). Indium concentration correlates with Cu, corroborating coupled (Cu⁺In³⁺) ↔ 2Zn²⁺ substitution. Tin, however, correlates with Ag, suggesting (2Ag⁺Sn⁴⁺) ↔ 3Zn²⁺ coupled substitution. Germanium-bearing sphalerite from Tres Marias (Mexico) contains several hundred ppm Ge, correlating with Fe. We see no evidence of coupled substitution for incorporation of Ge. Accordingly, we postulate that Ge may be present as Ge²⁺ rather than Ge⁴⁺. Trace element concentrations in different deposit types vary because fractionation of a given element into sphalerite is influenced by crystallization temperature, metal source and the amount of sphalerite in the ore. Epithermal and some skarn deposits have higher concentrations of most elements in solid solution. The presence of discrete minerals containing In, Ga, Ge, etc. also contribute to the observed variance in measured concentrations within sphalerite.     

Early Ordovician brachiopods from south-west Wales

The Early Ordovician brachiopods of south-west Wales (Pembrokeshire and Carmarthenshire) are identified, in most cases for the first time. That period is termed the local Arenig Stage in Britain, but it is now correlated with the Floian, Dapingian, and earlier half of the Darriwilian, which are more recently established international stages in the system of stratigraphical nomenclature. The rocks in south-west Wales were laid down as turbidites in a backarc basin which formed part of the margin of the relatively small independent microcontinent of Avalonia at that time. However, since the Rheic Ocean between Avalonia and the immense Gondwana continent was relatively narrow in the Arenig, the brachiopods reviewed here can be established to be part of the Mediterranean Province, which was also extensive in the higher-latitude sectors in and around Gondwana in the Early Ordovician. The 17 brachiopod species identified within the Arenig brachiopod faunas of south-west Wales are described, including the new species Aporthophyla prisca, Tritoechia bolohaulensis, Skenidoides pontyfennensis and Paurorthis? llangynogensis.     

Past glacial and interglacial conditions in the Arctic Ocean and marginal seas – a review

Past changes in the Arctic Ocean and its marginal seas have been profound, even during the last 10,000 years. Understanding these changes, such as those occurring during the transition from glacial to interglacial climates, are important for research on modern processes, because this knowledge provides a framework and unique perspective in which to view the modern physical and biological processes. This paper discusses our current understanding of past environmental change and processes relative to those currently in progress. Special emphasis is placed on the most recent transition from a glacial state to the modern interglacial conditions.     

四川天宝山铅锌矿床硫化物微量元素组成:LA-ICPMS研究

"川滇黔接壤铅锌矿集区"是我国西南大面积低温成矿域的重要组成部分,对于其中铅锌矿床是否属于MVT型矿床存在较大争议。本文以该矿集区中代表性矿床——四川天宝山矿床为例,通过LA-ICPMS原位元素分析,结合元素Mapping,以认识该矿床中闪锌矿和方铅矿微量元素组成特征及其赋存状态。研究表明,矿床中闪锌矿以富集Cd、Ge贫Fe、Mn、In、Sn、Co为特征,这些元素均以类质同象形式赋存于闪锌矿中,但含量变化范围较大,这可能与其成矿流体属于低温混合流体有关,这类盆地卤水流体在长期和长距离运移过程中,流经不同基底地层,活化出其中不同微量元素,因此成分变化较大,但以低温元素为主。此外,矿床中闪锌矿Ge和Cu呈现较好正相关关系,暗示其与Zn置换方式为:nC u~(2+)+Ge~(2+)(n+1)Zn~(2+),这可能是该矿床富集Ge的重要原因之一;矿床中方铅矿以富集Ag、Sb贫Bi为特征,含微量Cd和Tl,类质同象是这些元素主要赋存形式,其置换方式为(Ag)~(1+)+(Sb)~(3+)2Pb~(2+);矿床中Ge主要赋存于闪锌矿中,而方铅矿中不含Ge。总体上,本矿床硫化物微量元素组成与MVT型矿床基本一致,明显有别于喷流沉积型矿床、岩浆热液型矿床和远源夕卡岩型矿床,其成矿温度属于低温范围,成矿流体运移方向可能为深部→浅部。结合其矿床地质地球化学特征,本文认为天宝山铅锌矿床属于MVT型矿床,但其中闪锌矿中富集Cu,而方铅矿中富集Ag,可能暗示其形成具有一定特殊性。     

Seasonal variability in Atlantic Water off Spitsbergen

A combination of 2-year-long mooring-based measurements and snapshot conductivity–temperature–depth (CTD) observations at the continental slope off Spitsbergen (81°30′N, 31°00′E) is used to demonstrate a significant hydrographic seasonal signal in Atlantic Water (AW) that propagates along the Eurasian continental slope in the Arctic Ocean. At the mooring position this seasonal signal dominates, contributing up to 50% of the total variance. Annual temperature maximum in the upper ocean (above 215 m) is reached in mid-November, when the ocean in the area is normally covered by ice. Distinct division into ‘summer’ (warmer and saltier) and ‘winter’ (colder and fresher) AW types is revealed there. Estimated temperature difference between the ‘summer’ and ‘winter’ waters is 1.2 °C, which implies that the range of seasonal heat content variations is of the same order of magnitude as the mean local AW heat content, suggesting an important role of seasonal changes in the intensity of the upward heat flux from AW. Although the current meter observations are only 1-year long, they hint at a persistent, highly barotropic current with little or no seasonal signal attached.     

Raman study of MgCO3–FeCO3 carbonate solid solution at high pressures up to 55 GPa

Magnesite, siderite and ferromagnesites Mg_1?x Fe _x CO₃ (x = 0.05, 0.09, 0.2, 0.4) were characterized using in situ Raman spectroscopy at high pressures up to 55 GPa. For the Mg–Fe-carbonates, the Raman peak positions of six modes (T, L, ν₄, ν₁, ν₃ and 2ν₂) in the dependence of iron content in the carbonates at ambient conditions are presented. High-pressure Raman spectroscopy shows that siderite undergoes a spin transition at ~40 GPa. The examination of the solid solutions with compositions Mg_0.6Fe_0.4CO₃, Mg_0.8Fe_0.2CO₃, Mg_0.91Fe_0.09CO₃ and Mg_0.95Fe_0.05CO₃ indicates that with increase in the amount of the Fe spin transition pressure increases up to ~45 GPa.