Multi-proxy evidence of long-term changes in ecosystem structure in a Danish marine estuary, linked to increased nutrient loading

This paper presents a study of changes in eutrophication over the past 100 years in a fertile estuary. The Danish estuary Mariager Fjord is a long, narrow sill-fjord with a permanently anoxic basin. In 1997 anoxia spread from the basin to the entire inner estuary, killing almost all eukaryotes and prompting debate on the causes. This paper reports a multi-proxy survey of ²¹⁰Pb-dated sediment cores from the anoxic basin. Analyses of diatoms, dinoflagellates, pigments and geochemical proxies were used to determine changes in ecosystem structure over the past 100 years. The aim was to establish ‘base-line conditions’, for management purposes, of the biological structure prior to 1900, and to examine possible causes of changes observed. Geochemical proxies total nitrogen (TN), total carbon (TC) and biogenic silica (BSi) were consistently high throughout the sediment record. Increased concentrations of pigments and natural isotopes (δ¹³C, δ¹⁵N) suggested increasing production and nutrient loading. The main changes in the biological proxies occurred between 1915 and the 1940s, and indicated that the estuary has been somewhat eutrophic since 1900, but that the eutrophication process increased over the past 100 years. A reconstruction of TN concentration by a diatom-based transfer function supports this interpretation, with inferred TN ca. 1900 around 60 μmol l⁻¹, and an increase in TN concentration over the past century to ca. 130 μmol l⁻¹ by 1995. Inferred TN decreased to ca. 100 μmol l⁻¹ by 2001, similar to present day monitoring data.     

Sand ridges on the inner Atlantic shelf of North America: Morphometric comparisons with Huthnance stability model

Sand ridge fields on the inner shelf of the Middle Atlantic Bight are generally thought to have formed in response to northeasterly storm flows as the shoreface underwent erosional retreat with postglacial sea-level rise. However, the hydrodynamic mechanism is poorly unerstood. Coastal boundary models see the ridges as responses of the seafloor to distortions in the flow induced by the coastal boundary. Stability models propose that an irregular initial topography will evolve toward an ordered array of bedforms in response to repeated flow events. The two classes of models are not mutually exclusive, nor are members within each class mutually exclusive. Results of measurements of ridge spacing on the inner Atlantic shelf of North America agree with the predictions of stability models.     

Calculation of the added mass of circular cylinders in shallow water

The added mass of hull section shapes must be known, in order to carry out any studies of ship motions, which may be associated with either seakeeping or manoeuvring. Determination of the added mass in deep water can involve conformal mapping or surface singularity distributions. However, in shallow water the problem of determining the added mass is made more difficult by the proximity of the seabed. In this paper, three approaches to the problem of finding the added mass of semi-circular sections are explored. Although there is no known exact solution to this problem, the relationships given by the three methods are compared and the approximate nature of the solutions is examined. The first method is a series solution, which is taken here to include more terms than are normally given in the existing literature. The other two solutions are considered to be new, and so are given in some mathematical detail.     

Monazite behaviour and age significance in poly-metamorphic high-grade terrains: A case study from the western Musgrave Block, central Australia

Integrated, in situ textural, chemical and electron microprobe age analysis of monazite grains in a migmatitic metapelitic gneiss from the western Musgrave Block, central Australia has identified evidence for multiple events of growth and recrystallisation during poly-metamorphism in the Mesoproterozoic. Garnet + sillimanite-bearing metapelite underwent partial melting and segregation to palaeosome and leucosome during metamorphism between 1330 and 1296 Ma, with monazite grains in leucosome recording crystallisation at 1300 Ma. Monazite breakdown during melting is inferred to have occurred in the palaeosome. During a subsequent granulite facies event at 1200 Ma, deformation and metamorphism of leucosome and palaeosome resulted in partial disturbance of ages and potential minor growth on 1300 Ma monazite in leucosome. Growth of new, high-Y (+HREE) monazite in palaeosome domains occurred during garnet breakdown in the presence of sillimanite to cordierite and spinel, as a result of post-peak isothermal decompression. Diffusive enrichment of resorbed garnet rims in Y + HREE suggests garnet breakdown occurred slower than volume diffusion of REE. Monazite in both palaeosome and leucosome were subsequently partially to penetratively recrystallised during a retrogression event that is suggested to have occurred at 1150–1130 Ma. The intensity of recrystallisation and disturbance of ages appears linked to proximity to retrogressed garnet porphyroblasts and their occurrence in the relatively reactive or ‘fertile’ local environments provided by the palaeosome/mesosome volumes, which caused localised changes in retrogressive fluids towards compositions more aggressive to monazite. Like reaction textures, it is apparent that domainal equilibrium and reaction may control or at least strongly influence monazite REE and U–Th–Pb chemistry and hence ages.     

The Port Mouton Shear Zone: intersection of a regional fault with a crystallizing granitoid pluton

The peraluminous tonalite–monzogranite Port Mouton Pluton is a petrological, geochemical, structural, and geochronological anomaly among the many Late Devonian granitoid intrusions of the Meguma Lithotectonic Zone of southern Nova Scotia. The most remarkable structural feature of this pluton is a 4-km-wide zone of strongly foliated (040/subvertical) monzogranites culminating in a narrow (10–30 m), straight, zone of compositionally banded rocks that extends for at least 3 km along strike. The banded monzogranites consist of alternating melanocratic and leucocratic compositions that are complementary to the overall composition of that part of the pluton, suggesting an origin by mineral–melt and mineral–mineral sorting. Biotite and feldspar are strongly foliated in the plane of the compositional bands. These compositional variations and foliations originated by a process of segregation flow during shearing of the main magma with a crystallinity of 55–75%. Subsequent minor brittle fracturing of feldspars, twinning of microcline, development of blocky sub-grains in quartz, and kinking of micas demonstrate overprinting by a high-temperature deformation straddling the monzogranite solidus. Small folds and late sigmoidal dykes indicate dextral movement on the shear zone. This Port Mouton Shear Zone (PMSZ) is approximately co-linear with the only outcrops of Late Devonian mafic intrusions in the area, two of which are syn-plutonic with well-developed mingling textures in the marginal tonalite of the Port Mouton Pluton. Also closely co-linear with the mafic intrusions are a granitoid dyke that extends well beyond the outer contact of the Port Mouton Pluton, a swarm of large aligned angular xenolithic slabs, a zone of thin wispy schlieren banding, a large Be-bearing pegmatite, and a breccia pipe with abundant garnetiferous metapelitic xenoliths. In various ways, the shear zone may control all of these features. The Port Mouton Shear Zone is parallel to many other NE-trending faults and shear zones in the northern Appalachians, probably related to the docking of the Meguma Zone along the Cobequid–Chedabucto Fault system.     

The interpretation of reaction textures in Fe‐rich metapelitic granulites of the Musgrave Block,central Australia: constraints from mineral equilibria calculations in the system K2O–FeO–MgO–Al2O3–SiO2–H2O–TiO2–Fe2O3

Fe‐rich metapelitic granulites of the Musgrave Block, central Australia, contain several symplectic and coronal reaction textures that post‐date a peak S2 metamorphic assemblage involving garnet, sillimanite, spinel, ilmenite, K‐feldspar and quartz. The earliest reaction textures involve spinel‐ and quartz‐bearing symplectites that enclose garnet and to a lesser extent sillimanite. The symplectic spinel and quartz are in places separated by later garnet and/or sillimanite coronas. The metamorphic effects of a later, D3, event are restricted to zones of moderate to high strain where a metamorphic assemblage of garnet, sillimanite, K‐feldspar, magnetite, ilmenite, quartz and biotite is preserved. Quantitative mineral equilibria calculations in the system K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O–TiO₂–Fe₂O₃ (KFMASHTO) using Thermocalc 3.0 and the accompanying internally consistent dataset provide important constraints on the influence of TiO₂ and Fe₂O₃ on biotite‐bearing and spinel‐bearing equilibria, respectively. Biotite‐bearing equilibria are shifted to higher temperatures and spinel‐bearing equilibria to higher pressures and lower temperatures in comparison to the equivalent equilibria in K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O (KFMASH). The sequence of reaction textures involving spinel is consistent with a D2 P–T path that involved a small amount of decompression followed predominantly by cooling within a single mineral assemblage stability field. Thus, the reaction textures reflect changes in modal proportions within an equilibrium assemblage rather than the crossing of a univariant reaction. The D3 metamorphic assemblage is consistent with lower temperatures than those inferred for D2.     

The Organization of Production in High Technology Industries: An Empirical Assessment*

Recent attention given to the concept of vertical integration and disintegration of production processes has identified the existence of a continuum, with small, flexibly specialized producers at one end and large, mass production units at the other end. Firms along the continuum constantly strive for the optimum combination of economies of scale and scope. This paper attempts to identify the organizational characteristics of high technology firms in one industrial complex of the U.S. Manufacturing Belt. A principal components analysis is performed on a number of theoretically relevant variables for a sample of high technology establishments in Northeast Ohio. The results indicate that the region contains a variety of organizational forms ranging from isolated workshops to large, vertically integrated assembly plants. These findings conform to expectations derived from recent conceptualizations in the literature. Additional empirical research will further enhance understanding of the processes that shape the organization of production in territorial complexes.     

Loess studies in central United States: evolution of concepts

Few words in the realm of earth science have caused more debate than “loess”. It is a common term that was first used as a name of a silt deposit before it was defined in a scientific sense. Because this “loose” deposit is easily distinguished from other more coherent deposits, it was recognized as a matter of practical concern and later became the object of much scientific scrutiny. Loess was first recognized along the Rhine Valley in Germany in the 1830s and was first noted in the United States in 1846 along the lower Mississippi River where it later became the center of attention. The use of the name eventually spread around the world, but its use has not been consistently applied. Over the years some interpretations and stratigraphy correlations have been validated, but others have been hotly contested on conceptual grounds and semantic issues.

The concept of loess evolved into a complex issue as loess and loess-like deposits were discovered in different parts of the US. The evolution of concepts in the central US developed in four indefinite stages: the eras of (1) discovery and development of hypotheses, (2) conditional acceptance of the eolian origin of loess, (3) “bandwagon” popularity of loess research, and (4) analytical inquiry on the nature of loess. Toward the end of the first era around 1900, the popular opinion on the meaning of the term loess shifted from a lithological sense of loose silt to a lithogenetic sense of eolian silt. However, the dual use of the term fostered a lingering skepticism during the second era that ended in 1944 with an explosion of interest that lasted for more than a decade. In 1944, R.J. Russell proposed and H.N. Fisk defended a new non-eolian, property-based, concept of loess. The eolian advocates reacted with surprise and enthusiasm. Each side used constrained arguments to show their view of the problem, but did not examine the fundamental problem, which was not in the proofs of their hypothesis, but in the definition of the term.

Between 1944 and about 1950, the debates about loess reached a maximum level of complexity. The main semantic problem was submersed in peripheral arguments about physical properties and genetic interpretations. The scholarly treatment of the subject by Fisk and Russell stimulated quality responses from a diversity of earth scientists interested in academic and applied studies, particularly geo-history, pedology, soil mechanics and stratigraphy. The long-lasting popularity of loess studies during the bandwagon era lasted to about 1970. By that time, the analytical and technical interests had attracted the mainstream into the fourth era with a focus beyond the old arguments. Although Fisk and Russell found themselves defending an unpopular theory, they stimulated a scientific interest in the late Quaternary history of the Mississippi Valley that may never be exceeded.