Early formed regional antiforms and synforms that fold younger matrix schistosities: their effect on sites of mineral growth

In the metamorphic cores of many orogenic belts, large macroscopic folds in compositional layering also appear to fold one or more pervasive matrix foliations. The latter geometry suggests the folds formed relatively late in the tectonic history, after foliation development. However, microstructural analysis of four examples of such folds suggests this is not the case. The folds formed relatively early in the orogenic history and are the end product of multiple, near orthogonal, overprinting bulk shortening events. Once large macroscopic folds initiate, they may tighten further during successive periods of sub-parallel shortening, folding or reactivation of foliations that develop during intervening periods of near orthogonal shortening. Reactivation of the compositional layering defining the fold limbs causes foliation to be rotated into parallelism with the limbs.Multiple periods of porphyroblast growth accompanied the multiple phases of deformation that postdated the initial development of these folds. Some of these phases of deformation were attended by the development of large numbers of same asymmetry spiral-shaped inclusion trails in porphyroblasts on one limb of the fold and not the other, or larger numbers of opposite asymmetry spirals on the other limb, or similar numbers of the same asymmetry spirals on both limbs. Significantly, the largest disparity in numbers from limb to limb occurred for the first of these cases. For all four regional folds examined, the structural relationships that accompanied these large disparities were identical. In each case the shear sense operating on steeply dipping foliations was opposite to that required to originally develop the fold. Reactivation of the folded compositional layering was not possible for this shear sense. This favoured the development of sites of approximately coaxial shortening early during the deformation history, enhancing microfracture and promoting the growth of porphyroblasts on this limb in comparision to the other. These distributions of inclusion trail geometries from limb to limb cannot be explained by porphyroblast rotation, or folding of pre-existing rotated porphyroblasts within a shear zone, but can be explained by development of the inclusion trails synchronous with successive sub-vertical and sub-horizontal foliations.     

Significance of transition between Talchir Formation and Karharbari Formation in Lower Gondwana basin evolution — A study in West Bokaro Coal basin, Jharkhand, India

Basal part of the Gondwana Supergroup represented by Talchir and Karharbari Formations (Permo-Carboniferous) records an abrupt change-over from glacio-marine to terrestrial fluviolacustrine depositional environment. The contact between the two is an unconformity. Facies analysis of the glacio-marine Talchir Formation reveals that basal glaciogenic and reworked glaciogenic sediments are buried under storm influenced inner and outer shelf sediments. Facies associations of the Karharbari Formation suggest deposition as fluvio-lacustrine deposits in fault-controlled troughs. An attempt has been made in this paper to explain the sedimentation pattern in Talchir and Karharbari basins, and the abrupt change-over from glacio-marine to terrestrial fluviolacustrine depositional environment in terms of glacio-isostacy.     

Bleaching of the post‐IR IRSL signal: new insights for feldspar luminescence dating

Post‐infrared (pIR) stimulated luminescence dating of sedimentary feldspar largely avoids the effects of anomalous fading that affect conventional infrared stimulated luminescence (IRSL) dating. However, optical resetting of pIR signals is more difficult than resetting the conventional IRSL signal, which may undermine the crucial assumption that pIR signals were effectively bleached upon deposition and burial of sediment grains. In this study, we quantify the bleaching properties of several pIR signals on various samples using laboratory‐simulated bleaching in full sunlight and water‐attenuated sunlight. Our data show that bleaching is most efficient under full spectrum conditions for all pIR signals and that pIR signals measured at elevated temperature are increasingly harder to bleach than IR and pIR signals measured at low temperature (e.g. IR at 50°C). All bleaching curves exhibit a very slow and steady decrease, indicating that a fixed un‐bleachable residual level cannot be reached within the 11 days of solar simulator exposure undertaken here. We show that the magnitude of a laboratory‐determined residual dose depends on the adopted bleaching protocol and cannot be used as a proxy for the dose that remains in the sample at the time of burial (remnant dose). Our data emphasize the importance of finding a balance between sufficient signal stability and a minimized contribution of a remnant dose when using pIR procedures for feldspar luminescence dating.     

Multistage Variscan magmatism in the central Tauern Window (Austria) unveiled by U/Pb SHRIMP zircon data

U/Pb SHRIMP ages of nine Variscan leucocratic orthogneisses from the central Tauern Window (Austria) reveal three distinct pulses of magmatism in Early Carboniferous (Visean), Late Carboniferous (Stephanian) and Early Permian, each involving granitoid intrusions and a contemporaneous opening of volcano-sedimentary basins. A similar relationship has been reported for the Carboniferous parts of the basement of the Alps further to the west, e.g. the “External massifs” in Switzerland. After the intrusion of subduction-related, volcanic-arc granitoids (374?±?10?Ma; Zwölferkogel gneiss), collisional intrusive-granitic, anatectic and extrusive-rhyolitic/dacitic rocks were produced over a short interval at ca. 340?Ma (Augengneiss of Felbertauern: 340?±?4?Ma, Hochweißenfeld gneiss: 342?± 5?Ma, Falkenbachlappen gneiss: 343?±?6?Ma). This Early Carboniferous magmatism, which produced relatively small volumes of melt, can be attributed to the amalgamation of the Gondwana-derived “Tauern Window” terrane with Laurussia–Avalonia. Probably due to the oblique nature of the collision, transtensional phenomena (i.e. volcano-sedimentary troughs and high-level intrusives) and transpressional regimes (i.e. regional metamorphism and stacked nappes with anatexis next to thrust planes) evolved contemporaneously. The magmas are mainly of the high-K I-type and may have been generated during a short phase of decompressional melting of lithospheric mantle and lower crustal sources. In the Late Carboniferous, a second pulse of magmatism occurred, producing batholiths of calc-alkaline I-type granitoids (e.g. Venediger tonalite: 296?±?4?Ma) and minor coeval bodies of felsic and intermediate volcanics (Heuschartenkopf gneiss: 299?±?4?Ma, Peitingalm gneiss: 300?±?5?Ma). Prior to this magmatism, several kilometres of upper crust must have been eroded, because volcano-sedimentary sequences hosting the Heu- schartenkopf and Peitingalm gneisses rest unconformably on 340-Ma-old granitoids. The youngest (Permian) period of magma generation contains the intrusion of the S-type Granatspitz Central Gneiss at 271?±?4?Ma and the extrusion of the rhyolitic Schönbachwald gneiss protolith at 279?±?9?Ma. These magmatic rocks may have been associated with local extension along continental wrench zones through the Variscan orogenic crust or with a Permian rifting event. The Permian and the above-mentioned Late Carboniferous volcano-sedimentary sequences were probably deposited in intra-continental graben structures, which survived post-Variscan uplift and Alpine compressional tectonics.     

Middle pleistocene interglacial sediments at Tye green,Stansted Airport,Essex, England

Interglacial lake deposits at Tye Green, Stansted, resting on unweathered till and overlain by a weathered diamicton are correlated with the temperate Hoxnian Stage. The sediments represent the infilling of an isolated kettle-hole type of lake basin formed at the end of the cold Anglian Stage. Through the temperate period this basin was infilled by inorganic and organic sediments that record the development and decline of deciduous forest. Later periglacial conditions are indicated by the final infilling of the basin by reworked till. The sedimentary sequence and vegetational development recorded in the sediments at Tye Green are compared with other Hoxnian sites in eastern England. Changes in deposition rates are interpreted as representing water-table fluctuations resulting from changes in precipitation. The deposits at Tye Green provide a useful stratigraphical marker in the glacial sequence of the district. Copyright © 1999 John Wiley & Sons, Ltd.     

地气法－找深部金矿的新方法

介绍一种八十年代发展起来的找深部金矿的新方法一地气法。文中讨论了地气法的找矿机理，认为是地壳中上升气流将成矿元素微粒携带至地表而造成多元素异常。对工作方法着重讨论了地气采样与测试的系统，以及比较了积累式取样的效果。最后列出山东招远地区大尹格庄金矿８０号勘探线的地气测量多元素异常图。     

The coarsening kinetics associated with exsolution in an iron-free clinopyroxene

The coarsening kinetics of exsolution lamellae have been determined for an initial composition of 0.541 CaMgSi₂O₆–0.459 Mg₂Si₂O₆ (Di_54.1) at 1300 °, 1200 ° and 1100 ° C. Portions of this material were annealed for varying lengths of time, and the average wavelength () was obtained from measurements made by utilizing transmission electron microscopy (TEM). All experiments were conducted within the (001) coherent spinodal for this system (McCallister and Yund, 1977), and the lamellae are coherent up to and including the largest wavelength observed, 1054 Å.At all three temperatures mentioned previously the data are consistent with the following relationship: The activation energy for the process, as determined from the respective kinetic constants (k), is 99±2 Kcal/mol. This value is similar to that found for Ca self diffusion in pseudo-wollastonite and wollastonite, and suggests the possibility that the diffusion of Ca may be controlling the rate of coarsening.A comparison of exsolution microstructures in the synthetic samples with those observed in clinopyroxenes found in kimberlites and with similar Ca/Ca + Mg indicates that the latter cooled rapidly to the effective quench temperature.     

Boron substitution in diopside evaluated through 11B nuclear reaction analysis

 Nuclear reaction analyses on boron in flux-grown Me³⁺- and Na⁺-doped diopside crystals utilising the ¹¹B(p,2α)⁴He reaction in conjunction with EMP analyses for major elements and optical absorption spectroscopy for determination of Me-valence state distributions show that appreciable amounts of B may enter the diopside lattice in crystals produced in Na₂B₄O₇ fluxes. The results indicate that the substitution ^[6]Me^3+[4]B^3+[6]Mg²⁺ ₋₁ ^[4]Si⁴⁺ ₋₁ operates in the present diopside samples in addition to the coupled substitution ^[6]Me^3+[8]Na^+[6]Mg²⁺ ₋₁ ^[8]Ca²⁺ ₋₁. The specific NRA technique applied allows for quantitative, high resolution (ca. 5 μm) B analyses at ppm level as well as high-resolution and high-contrast imaging of B-concentration patterns in minerals. The estimated detection limit and relative error of the B analyses are 10 ppm and 5–10%, respectively. Received: 20 September 1999 / Accepted: 6 June 2000     

Hydraulic and sedimentary controls on the availability and use of Atlantic salmon (Salmo salar) spawning habitat in the River Dee system, north-east Scotland

The hydraulic and sedimentary characteristics of the spawning habitat of Atlantic salmon (Salmo salar) in tributary and mainstem locations in a river system in north-east Scotland are described. Salmon used spawning sites with a relatively wide range in sediment characteristics, although measures of central tendency were all in the gravel (2–64 mm) size-class. The dominant factor differentiating the sediment characteristics of study sites was the level of fine sediment, which accounted for significant differences between tributary and mainstem samples. The ranges of depth and velocity in areas used for spawning by salmonids were found to be similar in all tributary study sites. However, due to the interdependence of depth and velocity, major differences were observed between tributary and mainstem study sites in that spawning in larger streams tended to be associated with deeper, faster flowing water. Spawning locations were shown to have similar Froude number, despite different sized streams and species of salmonid. Due to its dimensionless nature and significance in characterising flow hydraulics, the Froude number is proposed as a potentially useful variable for describing the habitat of aquatic organisms.