The Exhumation History of North Qaidam Thrust Belt Constrained by Apatite Fission Track Thermochronology: Implication for the Evolution of the Tibetan Plateau

Determining the spatio-temporal distribution of the deformation tied to the India-Eurasian convergence and the impact of pre-existing weaknesses on the Cenozoic crustal deformation is significant for understanding how the convergence between India and Eurasia contributed to the development of the Tibetan Plateau. The exhumation history of the northeastern Tibetan Plateau was addressed in this research using a new apatite fission track (AFT) study in the North Qaidam thrust belt (NQTB). Three granite samples collected from the Qaidam Shan pluton in the north tied to the Qaidam Shan thrust, with AFT ages clustering in the Eocene to Miocene. The other thirteen samples obtained from the Luliang Shan and Yuka plutons in the south related to the Luliang Shan thrust and they have showed predominantly the Cretaceous AFT ages. Related thermal history modeling based on grain ages and track lengths indicates rapid cooling events during the Eocene-early Oligocene and since late Miocene within the Qaidam Shan, in contrast to those in the Cretaceous and since the Oligocene-Miocene in the Luliang Shan and Yuka region. The results, combined with published the Cretaceous thermochronological ages in the Qaidam Shan region, suggest that the NQTB had undergo rapid exhumation during the accretions along the southern Asian Andean-type margin prior to the India-Eurasian collision. The Cenozoic deformation initially took place in the North Qaidam thrust belt by the Eocene, which is consistent with the recent claim that the deformation of the northeastern Tibetan Plateau initiated in the Eocene as a response to continental collision between India and Eurasia. The immediate deformation responding to the collision is tentatively attributed to the pre-existing weaknesses of the lithosphere, and therefore the deformation of the northeastern Tibetan Plateau should be regarded as a boundary-condition-dependent process.     

A Survey of the Spatio-Temporal Data Model

Traditional GIS(Geographic Information System)mostly can only describe the transient state data and does not have the ability to deal with the temporal dynamic data. When the data changes, new data will take the place of the old data, namely the transient state change into another, and the old data will disappear. Therefore, it is unable to make an analysis of the updating changes of the data and predict the development trend of the future. In this case, TGIS (Temporal Geographic Information System) emerges and expands the time dimension on the basis of traditional GIS. Spatio-temporal data model is the key to TGIS. Spatio-temporal data modeling is not only related to dynamic expression of spatio-temporal objects, but also gives an important support for spatio-temporal analysis and reasoning. This paper summarized the theories and applications status at home and abroad of spatio-temporal data model in detail, illustrated family tree of spatio-temporal data model for the nearly fifty years, discussed improvement and application status of Base State with Amendments Model, Event-based Spatio-temporal Data Model, Object-oriented Data Model and other spatio-temporal data models, and raised the existing problems of spatio-temporal data model. The current existing problems mainly includes: ①There are a lot of spatio-temporal data models put forward, but some of them only focus on semantic design and neglect the verified; ②Most of existing spatio-temporal data model are for vector data, only the Event-based Spatio-temporal Data Model is raster data structure; ③At present, the expression the time-space information of geographic entity is relative separated with spatio-temporal data model; ④Spatio-temporal data model is mainly used in cadastral management, land use and forestry data updating, less application in other fields. In the end, the future development direction was put forward of spatio-temporal data model. In the time of big data and “Internet plus”, it is necessary to explore the big data spatio-temporal data model that supports multiple data formats.     

北京后沙峪凹陷的第四纪地层划分与构造演化

通过对北京平原北部昌平、顺义、朝阳等区域的多个深孔资料、尤其后沙峪地区G3钻孔资料的深入分析,并开展磁性地层学及孢粉测试成果研究,建立了钻孔的磁性地层序列,结合南口—孙河断裂、顺义断裂以及黄庄—高丽营断裂的活动性研究成果,确定了后沙峪凹陷的第四纪地层格架,分析了凹陷的构造演化过程。结果表明,后沙峪凹陷上G3孔下更新统底界为511.7 m,中更新统底界为175.5 m,上更新统底界为31.6 m。在燕山期晚期,黄庄—高丽营断裂形成,控制了北京凹陷的西部边界,在北东向顺义断裂和北西向南口—孙河断裂共同作用下形成后沙峪凹陷。进入第四纪后,G3钻孔地层在早、中、晚更新世的沉积速率分别为0.198 mm/a、0.255 mm/a和0.243 mm/a;各条断裂活动速率的差异性客观反映出各块体之间的升降特点。由于后沙峪凹陷处于黄庄—高丽营断裂的上盘,同时也是顺义断裂的下盘,因此,断裂间的相互运动在第四纪沉积作用下形成了后沙峪凹陷。     

贵州沿河萤石矿稀土元素地球化学特征及成因探讨

为了研究沿河县萤石矿成因,主要针对研究区内具代表性的水田坝和丰水岭两个矿床地质特征进行研究,并运用等离子质谱(ICP-MS)对稀土元素进行了系统分析。研究结果表明,围岩的稀土总量、轻稀土和重稀土的含量远高于萤石矿石,但是萤石的稀土配分型式与围岩相似。根据Moller等(1976)的Tb/Ca_Tb/La关系图,结合矿体特征和区地质背景研究,认为该区萤石矿为热水(热卤水)再造沉积岩(或矿床)。     

点苍山-哀牢山杂岩带中北段嘎洒地区变沉积岩的成因矿物学与变质演化特征

点苍山-哀牢山变质杂岩带中北段嘎洒地区出露了多种典型的变沉积岩,其中夕线石榴黑云二长片麻岩和二云母片岩保存多期/多阶段矿物相转变特征,本文通过岩相学和矿物化学的综合分析,并结合传统矿物对温压计的估算结果,限定上述典型变沉积岩峰期角闪-麻粒岩相(M1)阶段、近等温减压-高温剪切变形阶段(M2)和晚期退变质(M3)阶段的矿物组合及变质温压条件。峰期角闪-麻粒岩相(M1)阶段的矿物组合为:石榴石(Grt)+板柱状夕线石(Sil1)+黑云母(Bt1)+钾长石(Kfs)+斜长石(Pl)+石英(Qtz)+钛铁矿(Ilm),变质温度压力条件为t=690~750℃,p=690~810 MPa;近等温减压-高温剪切变形阶段(M2)阶段,稳定矿物组合为:Grt+Sil2+Bt2+Kfs+Pl+Qtz+Ilm,黑云母在强烈走滑剪切作用下发生脱水熔融反应:2 Bt→Sil+6(Mg,Fe)O+K_2O+5 Qtz+2 H_2O,石榴石、黑云母和夕线石等受到剪切变形影响而发生强烈定向,形成的温度压力条件为t=650~720℃,p=450~630 MPa;晚期退变质阶段(M_3)的稳定矿物组合为:Qtz+Bt+Ms+Pl,退变的温度压力条件为t=580~640℃,p=400~500MPa。其变质演化p-T轨迹样式具有近等温减压的顺时针型式,表明点苍山-哀牢山变质杂岩带曾经历了一次明显的俯冲-碰撞造山事件,峰期变质可达到角闪-麻粒岩相;在碰撞后的构造折返过程中,上述变质岩石发生强烈的高温剪切变形作用,并伴随着黑云母等含水矿物的脱水熔融。     

澜沧江杂岩带小黑江-上允地区蓝片岩的成因及变质演化

通过对澜沧江杂岩带小黑江-上允地区蓝片岩的岩相学、地球化学、成因矿物学以及相平衡模拟的综合研究,阐述蓝片岩的原岩以及变质演化过程。地球化学分析结果显示,蓝片岩具有一致的稀土元素配分模式,具弱Eu正或负异常,稀土元素和微量元素特征与OIB相似,其原岩可能为OIB型玄武岩。详细矿物学研究表明,本区蓝片岩记录了俯冲峰期蓝片岩相变质和峰期后绿片岩相变质两个变质阶段,其矿物组合分别为蓝闪石+钠长石+多硅白云母+绿泥石+绿帘石和蓝闪石+钠长石±阳起石+绿泥石+绿帘石。通过Na_2O-Ca O-Fe O-MgO-Al_2O_3-SiO_2-H_2O-O体系相平衡计算,得到两个阶段的压力范围分别约为0.95 GPa和0.40 GPa。     

北京平原区晚中生代安山岩锆石U-Pb年代学及其地质意义

本文对北京平原区Jr173井和Jr176井安山岩进行了SHRIMP和LA-LCP-MS锆石U-Pb定年,用以精确限定北京平原区火山岩时代、盆地形成与地貌转变之间的关系。2个安山岩中的锆石多晶型良好,具有典型的生长环带和较高的Th/U比值,显示其为岩浆锆石。Jr173井底部安山岩14颗锆石的206Pb/238U年龄可分为两组,其加权平均年龄分别为122.6Ma和138.4Ma;Jr176底部安山岩53颗锆石的206Pb/238U加权平均年龄为122.63Ma,表明该期火山岩的形成时代为早白垩世晚期,与前人认为的侏罗纪有较大区别。结合前人资料,北京地区沿着黄庄-高丽营断裂一线形成断陷盆地,西部隆升为山脉,东部下降为平原,就其安山岩喷发时代、空间展布和盆地发育特征而言,可视为中国东部晚中生代构造演化的一个缩影。     

渤海蓬莱9-1中生代花岗岩体岩石地球化学特征及其区域构造意义

蓬莱9-1花岗岩体是渤海海域首次发现的中生代花岗岩,鉴于渤海海域在华北克拉通中的重要构造位置,该花岗岩的形成时代和成因机制的研究对区域构造研究具有重大意义。锆石LA-ICP-MS U-Pb定年结果表明该花岗岩体形成于中侏罗世160~165Ma。花岗岩属于高钾钙碱性系列,为准铝质-过铝质花岗岩;富Al_2O_3(14.84%~17.19%)和Sr(485×10~(-6)~909×10~(-6)),贫Y(0.66×10~(-6)~1.39×10~(-6))和Yb(小于2.0×10~(-6)),无铕的负异常,多数样品表现为铕的弱正异常,表现出C-型埃达克岩特征。表明渤海地区在160~165Ma期间处于挤压地壳增厚环境下,以地壳减薄为标志的克拉通破坏过程彼时尚未发生,其区域动力学环境可能仍处于华北板块-华南板块碰撞拼接的影响范围内。     

西藏当雄地区拉屋矿床二长花岗岩地球化学特征及构造背景

西藏拉屋矿床位于冈底斯铜铅锌多金属成矿带东段。通过对拉屋矿区出露的二长花岗岩地球化学研究表明,岩石中SiO_2、Al_2O_3和CaO等的含量均高、贫Fe和低Na_2O;w(SiO_2)含量为65.40%~74.43%,A/CNK值在1.41~2.20之间,为强过铝质花岗岩。岩石稀土总量ΣREE(不含Y)较低,为(5.08~80.38)×10~(-6),LaN/YbN值为2.43~5.65,ΣLREE/ΣHREE为1.63~3.64,稀土元素配分型式为右倾型,具负铕异常。Nb、Ti、Zr、Ce等高场强元素和Ba明显的亏损,K、Rb、Sr等大离子亲石元素明显的富集。综合研究认为,本区花岗岩的物质来源于上部陆壳,岩浆源区岩石成分为泥质岩;该岩体为形成于同碰撞构造环境、地壳加厚阶段的过铝质花岗岩。     

海洋卡盾藻对青岛大扁藻的化感作用及其对UV-B辐射的响应

本研究以海洋微藻——赤潮藻海洋卡盾藻(Chattonella marina)与饵料藻青岛大扁藻(Platymonas helgolandica var.tsingtaoensis)为研究对象,采用单培养和共培养的方法,研究二者间的竞争关系,并在此基础上研究海洋卡盾藻去藻过滤液和藻细胞裂解液对青岛大扁藻的化感作用,同时进一步探讨两种海洋微藻间的化感作用对UV-B辐射增强的响应。结果显示:共培养条件下,海洋卡盾藻在2个高浓度下对青岛大扁藻的生长产生显著抑制(P0.05);海洋卡盾藻去藻过滤液和藻细胞裂解液对青岛大扁藻的生长也具有显著抑制作用(P0.05),且藻细胞裂解液的抑制作用更强,说明海洋卡盾藻对青岛大扁藻产生化感作用,且通过细胞间直接接触传递的化感物质多于通过介质传递的。不同密度比例的2种藻共培养组用UV-B辐射(2.16J/m2)处理后,海洋卡盾藻对青岛大扁藻生长的化感作用有所减弱。