Boron incorporation into mullite

Summary Boron-doped mullites were synthesized using aluminium nitrate-nonahydrate, tetraethoxysilane and boric acid in a sol–gel process with subsequent annealing at 950 and 1300 °C for five hours. Two different bulk compositions with constant Al₂O₃ contents (60 and 70 mol%, respectively) and varying SiO₂ plus B₂O₃ contents were investigated. X-ray powder diffraction analyses yielded a linear decrease of the lattice parameters with increasing bulk B₂O₃ content, which was interpreted as to be due to boron incorporation. Related to the increasing boron content, corresponding infrared spectra revealed a slight and continuous shift for most of the absorption bands. These data show that mullite is able to incorporate large amounts of boron into its structure (up to about 20 mol% B₂O₃ depending on the bulk composition of the starting materials). Infrared analyses suggest that boron is incorporated into the mullite structure in form of planar three-fold coordinated BO₃ groups. Author’s address: A. Beran, Institut für Mineralogie und Kristallographie, Universit?t Wien-Geozentrum, Althanstra?e 14, 1090 Wien, Austria     

Spatial Variability of Rock Depth in Bangalore Using Geostatistical, Neural Network and Support Vector Machine Models

Geospatial technology is increasing in demand for many applications in geosciences. Spatial variability of the bed/hard rock is vital for many applications in geotechnical and earthquake engineering problems such as design of deep foundations, site amplification, ground response studies, liquefaction, microzonation etc. In this paper, reduced level of rock at Bangalore, India is arrived from the 652 boreholes data in the area covering 220 km². In the context of prediction of reduced level of rock in the subsurface of Bangalore and to study the spatial variability of the rock depth, Geostatistical model based on Ordinary Kriging technique, Artificial Neural Network (ANN) and Support Vector Machine (SVM) models have been developed. In Ordinary Kriging, the knowledge of the semi-variogram of the reduced level of rock from 652 points in Bangalore is used to predict the reduced level of rock at any point in the subsurface of the Bangalore, where field measurements are not available. A new type of cross-validation analysis developed proves the robustness of the Ordinary Kriging model. ANN model based on multi layer perceptrons (MLPs) that are trained with Levenberg–Marquardt backpropagation algorithm has been adopted to train the model with 90% of the data available. The SVM is a novel type of learning machine based on statistical learning theory, uses regression technique by introducing loss function has been used to predict the reduced level of rock from a large set of data. In this study, a comparative study of three numerical models to predict reduced level of rock has been presented and discussed.     

Analysis of the 2003 Varunawat Landslide,Uttarkashi, India using Earth Observation data

Mass movements such as landslides in mountainous terrains are natural degradation processes and one of the most important landscape-building factors. Varunawat Parbat overlooking Uttarkashi town witnessed a series of landslides on 23 September 2003 and the debris slides and rock falls continued for 2 weeks. This landslide complex was triggered due to the incessant rainfall prior to the event, and its occurrence led to the blockage of the pilgrim route to Gangotri (source of the Ganges river) and evacuation of thousands of people to safer places. Though there was no loss of lives due to timely evacuation, heavy losses to the property were reported. High-resolution stereoscopic earth observation data were acquired after the incidence to study the landslide in detail with emphasis on the cause of the landslide and mode of failure. Areas along the road and below the Varunawat foothill region are mapped for landslide risk. It was found that the foothill region of the Varunawat Parbat was highly disturbed by man-made activities and houses are dangerously located below steep slopes. The potential zones for landslides along with the existing active and old landslides are mapped. These areas are critical and their treatment with priority is required in order to minimise further landslide occurrences.     

天津地面沉降区土水比论述

天津市地面沉降分布广,沉降速率大。本文针对当前地面沉降研究和防治过程中所遇到的勘查资料严重缺乏、禁采难以全面实现等难题,提出了土水比指标量。通过概念分析和对多年数据的分析,认为土水比可以检验地下水开采量数据的统计精度,指示地下水资源补给及土层释水条件,并表明沉降的严重程度,反映地下水资源的保障程度。建议在沉降防治工作中,以土水比作为指标,通过相关分析模型来制定压采量。     

加强技术创新服务地质调查——庆祝探矿工艺研究所成立30周年

为加强地质探矿技术力量,改变地质装备落后现状,经国务院批准,1978年8月8日成立了探矿工艺研究所。30年来,经过新老两代工艺所人的艰苦奋斗、刻苦钻研、勇于创新,在科研攻关、成果转化、基地建设和管理等方面都取得了可喜的成绩,为国家的地质科学事业做出了贡献,目前已成为一个“以勘查技术为基础,以承担地质调查任务和科研项目、提供勘查与监测技术方法和技术服务为手段,以服务国家经济建设、社会发展和地质工作为目标,以探矿工艺技术和地质灾害监测防治技术研发为主业”的地质调查科研机构。回顾了工艺所艰苦创业、改革进取的发展历程,对科技体制改革、专业结构调整、人事分配制度改革、地质调查和科研工作进行了总结,展示了丰硕的科研成果和强劲的科技实力;指出了工艺所在“十一五”期间地质调查和科研工作的重点领域和优先发展方向。     

螺旋钻进技术在杉木树煤矿强突出煤层中的应用

通过目前瓦斯抽放孔成孔工艺的比较,介绍了杉木树矿强突出煤层采用螺旋钻进工艺试验的工艺过程及其优势,并介绍了在该煤矿的具体试验情况。     

螺杆钻进技术在煤田地质勘探中的应用

在煤田地质钻探生产中,由于地质因素、钻进方法、操作不当等综合因素,出现钻孔偏斜严重超限或发生复杂的孔内事故无法处理时,采用传统的纠斜方法和造斜手段来处理,不但费工费时,事故处理和纠偏的效果不佳,而且会给后继施工带来更大的安全隐患。利用螺杆定向钻进技术快速纠斜和绕过复杂的事故孔段,顺利完成施工任务,达到设计目的,收到了很好的效果。     

气举反循环采矿方法单井试验及应用探讨

湖南道县一个矿区,铁锰矿体储量约2200万t。由于复杂的水文地质和工程地质条件,从20世纪70年代发现后,一直没有开采。笔者通过多年大直径工程井的实践经验,查阅国内外资料后,提出了钻井-气举反循环法试开采的方法,并在现场进行了单孔开采试验,获得了比较满意的效果。以该矿体Ⅱ号矿为例,介绍了钻井-气举反循环法采矿的适用条件、工艺过程以及试采情况,并就以后大面积开采提出了若干技术措施。     

采用钻孔倾斜仪监测滑坡深部水平位移方法和仪器的研究

介绍了目前滑坡深部水平位移钻孔倾斜仪人工监测方法存在的问题,钻孔深部位移自动化监测通信方法的选择。地质滑坡灾害监测中广泛使用钻孔倾斜仪,介绍了CZ-2型钻孔倾斜仪的构成及现场测试方法。     

深井旋转轴套流场的CFD模拟

旋转轴套在超深井工作时,其井下流动是三维湍流流动,旋转轴套的旋转和表面曲率效应以及随之而来的哥氏力和离心力,使流场在超深井的流动中极其复杂,同时,由于流体介质泥浆属于液固两相流,更致使内部流场测试困难,而且超深井中的工况在使用常规方法已很难得到较准确的数据。为此,将计算流体力学软件Fluent应用于超深井下流场的模拟,基于Navier-Stokes方程和Reynolds应力方程模型,建立多种仿真模型,在相同条件下,使用CFD仿真软件Fluent模拟仿真的不同结果,优化与旋转轴套叶片设计相关的几何参数,提高