Volcanism on Io: New insights from global geologic mapping

We produced the first complete, 1:15 M-scale global geologic map of Jupiter’s moon Io, based on a set of monochrome and color Galileo-Voyager image mosaics produced at a spatial resolution of 1 km/pixel. The surface of Io was mapped into 19 units based on albedo, color and surface morphology, and is subdivided as follows: plains (65.8% of surface), lava flow fields (28.5%), mountains (3.2%), and patera floors (2.5%). Diffuse deposits (DD) that mantle the other units cover ∼18% of Io’s surface, and are distributed as follows: red (8.6% of surface), white (6.9%), yellow (2.1%), black (0.6%), and green (∼0.01%). Analyses of the geographical and areal distribution of these units yield a number of results, summarized below. (1) The distribution of plains units of different colors is generally geographically constrained: Red-brown plains occur >±30° latitude, and are thought to result from enhanced alteration of other units induced by radiation coming in from the poles. White plains (possibly dominated by SO₂ + contaminants) occur mostly in the equatorial antijovian region (±30°, 90-230°W), possibly indicative of a regional cold trap. Outliers of white, yellow, and red-brown plains in other regions may result from long-term accumulation of white, yellow, and red diffuse deposits, respectively. (2) Bright (possibly sulfur-rich) flow fields make up 30% more lava flow fields than dark (presumably silicate) flows (56.5% vs. 43.5%), and only 18% of bright flow fields occur within 10 km of dark flow fields. These results suggest that secondary sulfurous volcanism (where a bright-dark association is expected) could be responsible for only a fraction of Io’s recent bright flows, and that primary sulfur-rich effusions could be an important component of Io’s recent volcanism. An unusual concentration of bright flows at ∼45-75°N, ∼60-120°W could be indicative of more extensive primary sulfurous volcanism in the recent past. However, it remains unclear whether most bright flows are bright because they are sulfur flows, or because they are cold silicate flows covered in sulfur-rich particles from plume fallout. (3) We mapped 425 paterae (volcano-tectonic depressions), up from 417 previously identified by Radebaugh et al. (Radebaugh, J., Keszthelyi, L.P., McEwen, A.S., Turtle, E.P., Jaeger, W., Milazzo, M. [2001]. J. Geophys. Res. 106, 33005-33020). Although these features cover only 2.5% of Io’s surface, they correspond to 64% of all detected hot spots; 45% of all hot spots are associated with the freshest dark patera floors, reflecting the importance of active silicate volcanism to Io’s heat flow. (4) Mountains cover only ∼3% of the surface, although the transition from mountains to plains is gradational with the available imagery. 49% of all mountains are lineated and presumably layered, showing evidence of linear structures supportive of a tectonic origin. In contrast, only 6% of visible mountains are mottled (showing hummocks indicative of mass wasting) and 4% are tholi (domes or shields), consistent with a volcanic origin. (5) Initial analyses of the geographic distributions of map units show no significant longitudinal variation in the quantity of Io’s mountains or paterae, in contrast to earlier studies. This is because we use the area of mountain and patera materials as opposed to the number of structures, and our result suggests that the previously proposed anti-correlation of mountains and paterae (Schenk, P., Hargitai, H., Wilson, R., McEwen, A., Thomas, P. [2001]. J. Geophys. Res. 106, 33201-33222; Kirchoff, M.R., McKinnon, W.B., Schenk, P.M. [2011]. Earth Planet. Sci. Lett. 301, 22-30) is more complex than previously thought. There is also a slight decrease in surface area of lava flows toward the poles of Io, perhaps indicative of variations in volcanic activity. (6) The freshest bright and dark flows make up about 29% of all of Io’s flow fields, suggesting active emplacement is occurring in less than a third of Io’s visible lava fields. (7) About 47% of Io’s diffuse deposits (by area) are red, presumably deriving their color from condensed sulfur gas, and ∼38% are white, presumably dominated by condensed SO₂. The much greater areal extent of gas-derived diffuse deposits (red + white, 85%) compared to presumably pyroclast-bearing diffuse deposits (dark (silicate tephra) + yellow (sulfur-rich tephra), 15%) indicates that there is effective separation between the transport of tephra and gas in many Ionian explosive eruptions. Future improvements in the geologic mapping of Io can be obtained via (a) investigating the relationships between different color/material units that are geographically and temporally associated, (b) better analysis of the temporal variations in the map units, and (c) additional high-resolution images (spatial resolutions ∼200 m/pixel or better). These improvements would be greatly facilitated by new data, which could be obtained by future missions.     

Mobility and accumulation of selenium and its relationship with other heavy metals in the system rocks/soils–crops in areas covered by black shale in Korea

The purpose of this study is to investigate the enrichment level and dispersion patterns of Se and associated elements in rocks, soils and crops which were collected in the Dukpyung and the Chubu areas covered with black shales of the Okchon Group in Korea. Rock and soil samples were analyzed for Se including multiple elements by ICP, ICP-MS and INAA, and crop samples by INAA. Soil pH and loss-on-ignition (LOI) were also measured.     

New estimates for Io eruption temperatures: Implications for the interior

The initial interpretation of Galileo data from Jupiter's moon, Io, suggested eruption temperatures . Tidal heating models have difficulties explaining Io's prodigious heat flow if the mantle is , although we suggest that temperatures up to may be possible. In general, Io eruption temperatures have been overestimated because the incorrect thermal model has been applied. Much of the thermal emission from high-temperature hot spots comes from lava fountains but lava flow models were utilized. We apply a new lava fountain model to the highest reported eruption temperature, the SSI observation of the 1997 eruption at Pillan. This resets the lower temperature limit for the eruption from 1600 to . Additionally, viscous heating of the magma may have increased eruption temperature by as a result of the strong compressive stresses in the ionian lithosphere. While further work is needed, it appears that the discrepancy between observations and interior models is largely resolved.     

Ridges and tidal stress on Io

Sets of ridges of uncertain origin are seen in twenty-nine high-resolution Galileo images, which sample seven locales on Io. These ridges are on the order of a few kilometers in length with a spacing of about a kilometer. Within each locale, the ridges have a consistent orientation, but the orientations vary from place to place. We investigate whether these ridges could be a result of tidal flexing of Io by comparing their orientations with the peak tidal stress orientations at the same locations. We find that ridges grouped near the equator are aligned either north-south or east-west, as are the predicted principal stress orientations there. It is not clear why particular groups run north-south and others east-west. The one set of ridges observed far from the equator (52° S) has an oblique azimuth, as do the tidal stresses at those latitudes. Therefore, all observed ridges have similar orientations to the tidal stress in their region. This correlation is consistent with the hypothesis that tidal flexing of Io plays an important role in ridge formation.     

Surface changes on Io during the Galileo mission

A careful survey of Galileo SSI global monitoring images revealed more than 80 apparent surface changes that took place on Io during the 5 year period of observation, ranging from giant plume deposits to subtle changes in the color or albedo of patera surfaces. Explosive volcanic activity was discovered at four previously unrecognized centers: an unnamed patera to the south of Karei that produced a Pele-sized red ring, a patera to the west of Zal that produced a small circular bright deposit, a large orange ring detected near the north pole of Io, and a small bright ring near Io's south pole. Only a handful of Io's many active volcanoes produced large scale explosive eruptions, and several of these erupted repeatedly, leaving at least 83% of Io's surface unaltered throughout the Galileo mission. Most of the hot spots detected from SSI, NIMS and ground-based thermal observations caused no noticeable surface changes greater than 10 km in extent over the five year period. Surface changes were found at every location where active plumes were identified, including Acala which was never seen in sunlight and was only detected through auroral emissions during eclipse. Two types of plumes are distinguished on the basis of the size and color of their deposits, confirming post-Voyager suggestions by McEwen and Soderblom [Icarus 55 (1983) 191]. Smaller plumes produce near-circular rings typically 150-200 km in radius that are white or yellow in color unless contaminated with silicates, and frequently coat their surroundings with frosts of fine-grained SO₂. The larger plumes are much less numerous, limited to a half dozen examples, and produce oval, orange or red, sulfur-rich rings with maximum radii in the north-south direction that are typically in the range from 500 to 550 km. Both types of plumes can be either episodic or quasi-continuous over a five year period. Repeated eruptions of the smaller SO₂-rich plumes likely contribute significantly to Io's resurfacing rate, whereas dust ejection is likely dominated by the tenuous giant plumes. Both types of plume deposits fade on time-scales of months to years through burial and alteration. Episodic seepages of SO₂ at Haemus Montes, Zal Montes, Dorian Montes, and the plateau to the north of Pillan Patera may have been triggered by activity at nearby volcanic centers.     

Evidence for Nearly Complete Decoupling of Very Stable Nocturnal Boundary Layer Overland

Concentrations of ²²²Rn at 0.1 m and 6.5 m height above ground level and ²²²Rn flux density were measured during nights characterized by strong cooling, light winds and clear sky conditions in the Carpathian Basin in Hungary. A very stable boundary layer (vSBL) formed on 14 nights between 15 August and 3 September 2009. On 12 nights, an estimated 72% (s.d. 20%) of ²²²Rn emitted from the surface since sunset was retained within the lowest 6.5 m above the ground until sunrise the following morning. On two nights an intermittent increase in wind speed at 9.4 m height was followed by a rise in temperature at 2.0 m height, indicating a larger atmospheric motion that resulted in ²²²Rn at 0.1 m around sunrise being the same as around the preceding sunset. It does not seem to be rare in a large continental basin for a vSBL to be nearly completely decoupled from the atmosphere above for the entire period from sunset to sunrise.     

Volcanic activity at Tvashtar Catena, Io

Galileo's Solid State Imager (SSI) observed Tvashtar Catena four times between November 1999 and October 2001, providing a unique look at a distinctive high latitude volcanic complex on Io. The first observation (orbit I25, November 1999) resolved, for the first time, an active extraterrestrial fissure eruption; the brightness temperature was at least 1300 K. The second observation (orbit I27, February 2000) showed a large (∼500 km²) region with many, small, hot, regions of active lava. The third observation was taken in conjunction with Cassini imaging in December 2000 and showed a Pele-like, annular plume deposit. The Cassini images revealed an ∼400 km high Pele-type plume above Tvashtar Catena. The final Galileo SSI observation of Tvashtar (orbit I32, October 2001), revealed that obvious (to SSI) activity had ceased, although data from Galileo's Near Infrared Mapping Spectrometer (NIMS) indicated that there was still significant thermal emission from the Tvashtar region. In this paper, we primarily analyze the style of eruption during orbit I27 (February 2000). Comparison with a lava flow cooling model indicates that the behavior of the Tvashtar eruption during I27 does not match that of simple advancing lava flows. Instead, it may be an active lava lake or a complex set of lava flows with episodic, overlapping eruptions. The highest reliable color temperature is ∼1300 K. Although higher temperatures cannot be ruled out, they do not need to be invoked to fit the observed data. The total power output from the active lavas in February 2000 was at least ¹⁰¹¹ W.     

In situ identification of a CAI candidate in 81P/Wild 2 cometary dust by confocal high resolution synchrotron X-ray fluorescence

We detected additional CAI-like material in STARDUST mission samples of comet 81P/Wild 2. Two highly refractory cometary dust fragments were identified in the impact track 110 [C2012, 0, 110, 0, 0] by applying high resolution synchrotron induced confocal and conventional XRF analysis (HR SR-XRF). The use of a polycapillary lens in front of the detector for confocal spectroscopy dramatically improves the fidelity of particle measurements by removing contribution from the surrounding aerogel. The high spatial resolution (300 × 300 nm²; 300 × 1000 nm²) obtained allowed the detailed non-destructive in situ (trapped in aerogel) study of impacted grains at the sub-μm level.For the two largest particles of the track, the terminal particle and a second particle along the impact track, Ca concentration is up to 30 times higher than CI and Ti is enriched by a factor of 2 compared to CI. High resolution (HR) SR-XRF mapping also reveals that the highest concentrations of Ca, Ti, Fe (and Ni) measured within each grain belongs to different areas of the respective maps which indicate that the particles are composed of several chemically diverse mineral phases. This is in agreement with the finding of a complex phase assemblage of highly refractory minerals in the first ever detected Stardust mission CAI grain “Inti” of Track 25.Principle component analysis (PCA) is a powerful tool for extracting the dominant mineral components and was applied to the two grains indicating that regions in the terminal particle and the second particle are consistent with anorthite or grossite and gehlenite, monticellite or Dmitryivanovite (CaAl₂O₄), respectively.Our new findings demonstrate that the HR SR-XRF with confocal geometry and PCA analysis is capable of identifying CAI-like fragments without the need to extract particles from the aerogel matrix which is a time-consuming, complex and destructive process.Furthermore, the detection of new CAI-like fragments in the coma dust of comet 81P/Wild 2 strengthens the observation that strong mixing effects and, therefore, mass transport before or during comet formation must have occurred at least up to the region where Kuiper Belt comets formed (30 AU).     

The emplacement of pahoehoe toes: field observations and comparison to laboratory simulations

We observed active pahoehoe lobes erupted on Kilauea during May-June 1996, and found a range of emplacement styles associated with variations in local effusion rate, flow velocity, and strain rate. These emplacement styles were documented and quantified for comparison with earlier laboratory experiments.At the lowest effusion rates, velocities, and strain rates, smooth-surfaced lobes were emplaced via swelling, where new crust formed along an incandescent lip at the front of the lobe and the rest of the lobe was covered with a dark crust. At higher effusion rates, strain rates and velocities, lobes were emplaced through tearing or cracking. Tearing was characterized by ripping of the ductile crust near the initial breakout point, and most of the lobe surface was incandescent during its emplacement. This mechanism was observed to generate both smooth-surfaced lobes, and, when the lava encountered an obstacle, folded lobes. Cracking lobes were similar to those emplaced via tearing, but involved breaking of a thicker, brittle crust at the initial breakout of the lobe and therefore required somewhat higher flow rates than did tearing. Cracking lobes typically formed ropy folds in the center of the lobe, and smooth margins. At the highest effusion rates, strain rates, and flow velocities, the lava formed open channels with distinct levees.The final lobe morphologies were compared to results from laboratory simulations, which were designed to infer effusion rate from final flow morphology, to quantitatively test the laboratory results on the scale of individual natural pahoehoe lobes. There is general agreement between results from laboratory simulations and natural lavas on the scale of individual pahoehoe lobes, but there are disparities between laboratory flows and lava flows on the scale of an entire pahoehoe lava flow field.Editorial responsibility: A. Woods     

The final Galileo SSI observations of Io: orbits G28-I33

We present the observations of Io acquired by the Solid State Imaging (SSI) experiment during the Galileo Millennium Mission (GMM) and the strategy we used to plan the exploration of Io. Despite Galileo's tight restrictions on data volume and downlink capability and several spacecraft and camera anomalies due to the intense radiation close to Jupiter, there were many successful SSI observations during GMM. Four giant, high-latitude plumes, including the largest plume ever observed on Io, were documented over a period of eight months; only faint evidence of such plumes had been seen since the Voyager 2 encounter, despite monitoring by Galileo during the previous five years. Moreover, the source of one of the plumes was Tvashtar Catena, demonstrating that a single site can exhibit remarkably diverse eruption styles—from a curtain of lava fountains, to extensive surface flows, and finally a ∼400 km high plume—over a relatively short period of time (∼13 months between orbits I25 and G29). Despite this substantial activity, no evidence of any truly new volcanic center was seen during the six years of Galileo observations. The recent observations also revealed details of mass wasting processes acting on Io. Slumping and landsliding dominate and occur in close proximity to each other, demonstrating spatial variation in material properties over distances of several kilometers. However, despite the ubiquitous evidence for mass wasting, the rate of volcanic resurfacing seems to dominate; the floors of paterae in proximity to mountains are generally free of debris. Finally, the highest resolution observations obtained during Galileo's final encounters with Io provided further evidence for a wide diversity of surface processes at work on Io.