High-Mg potassic rocks from Taiwan: implications for the genesis of orogenic potassic lavas

Taiwan is an active mountain belt formed by oblique collision between the Luzon arc and the Asian continent. Regardless of the ongoing collision in central and southern Taiwan, a post-collisional extension regime has developed since the Plio–Pleistocene in the northern part of this orogen, and led to generation of the Northern Taiwan Volcanic Zone. Emplaced at 0.2 Ma in the southwest of the Volcanic Zone, lavas from the Tsaolingshan volcano are highly magnesian (MgO≈15 wt.%) and potassic (K₂O≈5 wt.%; K₂O/Na₂O≈1.6–3.0). Whereas these basic rocks (SiO₂≈48 wt.%) have relatively low Al₂O₃≈12 wt.%, total Fe₂O₃≈7.5 wt.% and CaO≈7.2 wt.%, they are extremely enriched in large ion lithophile elements (LILE, e.g. Cs, Rb, Ba, Th and U). The Rb and Cs abundances, >1000 and 120 ppm, respectively, are among the highest known from terrestrial rocks. In addition, these rocks are enriched in light rare earth elements (LREE), depleted in high field strength elements (HFSE), and display a positive Pb spike in the primitive mantle-normalized variation diagram. Their REE distribution patterns mark with slight Eu negative anomalies (Eu/Eu*≈0.90–0.84), and Sr and Nd isotope ratios are uniform (⁸⁷Sr/⁸⁶Sr≈0.70540–0.70551; ¹⁴³Nd/¹⁴⁴Nd≈0.51268–0.51259). Olivine, the major phenocryst phase, shows high Fo contents (90.4±1.8; 1σ deviation), which are in agreement with the whole rock Mg-values (83–80). Spinel inclusions in olivine are characterized by high Cr/Cr+Al ratios (0.94–0.82) and have compositions similar to those from boninites that originate from highly refractory peridotites. Such petrochemical characteristics are comparable to the Group I ultrapotassic rocks defined by Foley et al. [Earth-Sci. Rev. 24 (1987) 81], such as orogenic lamproites from central Italy, Span and Tibet. We therefore suggest that the Tsaolingshan lavas resulted from a phlogopite-bearing harzburgitic source in the lithospheric mantle that underwent a recent metasomatism by the nearby Ryukyu subduction zone processes. The lavas exhibit unique incompatible trace element ratios, with Rb/Cs≈8, Ba/Rb≈1, Ce/Pb≈2, Th/U≈1 and Nb/U≈0.8, which are significantly lower than the continental crust values and those of most mantle-derived magmas. Nonmagmatic enrichment in the mantle source is therefore required. Based on published experimental data, two subduction-related metasomatic components, i.e., slab-released hydrous fluid and subducted sediment, are proposed, and the former is considered to be more pervasive for causing the extraordinary trace element ratios observed. Our observations lend support to the notion that dehydration from subducting slabs at convergent margins, as a continuing process through geologic time, can account for the fractionation of these elemental pairs between the Earth's crust and mantle.     

葛洲坝垂直位移自动监测系统

本文介绍了葛洲坝垂直位移遥控监测系统的工作原理、结构、电路设计特点及实际使用效果。几年的实测结果证明了此系统量测精度高、稳定性好、自动化程度高，实现了联机实时自动监测大坝垂直位移的目标。     

云南破坏性地震与气象要素的关系

本文认为云南破坏性地震与降水和地面气温之间有着密切的关系。在雨季,震中位于发震前一月内降水分布高值中心附近,发震前半月内震中均有中雨以上的降水出现,且其中出现大～暴雨的概率为60%,发震前一月内震中降水量比同期多,年平均值偏高,震前半月内地面平均气温距平值的高值中心总是位于震中附近。而在干季则恰恰与此相反,即震中位于降水分布低值区,发震前后降水都很少,震中降水量比同期多年平均偏低,震前半月内地面平均气温距平值的高值中心总是位于震中下风方向约120km处。这些结果对提高震前短期预报水平具有现实意义。     

2004年气象因子对棉花生长的影响

针对2004年石河子气象因子对棉花减产的影响进行分析,得出棉花减产因素为:春季土墒、花期暴雨、铃期低温、病虫害、早霜,并提出了相应的对策。     

全站仪的X-Y倾斜传感器的设计方法初探

Ｘ－Ｙ倾斜（水平度）传感器是当仪器整平后,对垂直轴的剩余倾斜值作垂直角和水平角的改正。本文论及光路、电路以及传感器内部结构。     

语言的体验性与英语词汇习得研究

从语言的体验性的角度,探讨了第二语言习得中词汇习得的体验性特征,并以《大学体验英语》中词汇学习为实证进行了分析。认为语言的体验观为第二语言词汇习得研究提供了一个新的视角,有利于二语词汇的理解、把握和运用。     

InSAR技术支持下的高速铁路沿线沉降监测与预测

针对盘营铁路专线、哈大铁路专线沿线沉降监测研究较少,采用InSAR技术获取了研究区地表形变信息,还对其进行了相关分析.用SBAS-InSAR对35景Sentinel-1A SAR数据进行处理,获取VV、VH极化下的年均沉降速率及沉降序列;以年均沉降速率为研究对象,进行沿线沉降特征分析及交叉验证;利用小波变换对沉降序列降噪处理,用改进BP神经网络对降噪后沉降序列预测分析.研究结果表明,研究区内高速铁路沿线共监测出6个明显沉降区域,最大沉降速率达50mm/a;两种极化年均沉降速率具有较高的一致性,降噪处理后的沉降序列更加平滑;改进BP神经网络具有较高的收敛速度,其预测精度有较大提高.     

我国新一代VLBI数字基带转换器研制进展

数字化是目前设备研制发展的趋势,介绍了中国科学院上海天文台利用超大规模集成电路结合软件无线电技术,自主研发的我国新一代VLBI数字基带转换器(Chinese Data Acquisition System,简称CDAS).文中描述了设备的工作原理及其组成,并以VLBI观测实验数据证明其可行性.与原有的模拟设备(Anal...     

悬链线法在水平定向钻轨迹设计中的应用探究

铝孔轨迹设计是非开挖水平定向钻施工中一项重要内容。其最优化设计在国内已较成熟,但多数优化设计未从力学方面进行优化设计。针对这一情况,引入悬链线法来优化水平定向钻轨迹设计。通过悬链线法的计算可知,优化后的轨迹不仅有利于降低钻杆回转阻力和扭矩消耗,提高机械钻速,增长管道使用年限,同时与传统设计方法相比较,其计算出的轨迹长度也比传统圆弧轨迹长度略短,表明了悬链线法在水平定向钻轨迹设计上具有一定的优势。     

移动AR+VR支持下旅游GIS系统的设计与实现

随着云计算、物联网、移动通信、移动互联网等技术的发展,研发智能化、多维度、全方位的旅游管理信息系统,已成为旅游信息化的发展趋势。本文以青岛八大关为例,综合利用基于位置与多传感器的跟踪注册技术、瓦片地图技术、三维景观地图技术和移动增强现实系统虚实叠加技术,研究并实现了面向旅游业的移动化、信息化、智能化、个性化的智能旅游服务系统,为游客提供认知周围景观的全新视角,获得全新的交互体验。系统包括三维景观地图、虚拟漫游、路线导航、环境识别、历史建筑查询、热力图显示、好友足迹、个人轨迹、微信分享等功能模块,游客在享受旅途的同时可以获得更加智能便捷的服务。