Approximating constant‐Q seismic propagation in the time domain

In this study, we investigate the accuracy of approximating constant‐Q wave propagation by series of Zener or standard linear solid (SLS) mechanisms. Modelling in viscoacoustic and viscoelastic media is implemented in the time domain using the finite‐difference (FD) method. The accuracy of numerical solutions is evaluated by comparison with the analytical solution in homogeneous media. We found that the FD solutions using three SLS relaxation mechanisms as well as a single SLS mechanism, with properly chosen relaxation times, are quite accurate for both weak and strong attenuation. Although the RMS errors of FD simulations using a single relaxation mechanism increase with increasing offset, especially for strong attenuation (Q = 20), the results are still acceptable for practical applications. The synthetic data of the Marmousi‐II model further illustrate that the single SLS mechanism, to model constant Q, is efficient and sufficiently accurate. Moreover, it benefits from less computational costs in computer time and memory.     

多极距地电阻率观测系统的分布式电极控制器研制

详述数字电极的系统构成、电路结构、通信协议和其他关键技术。该系统的通信网络结构基于RS-485现场总线,通过环境测试和台站试验,发现数字电极技术适用于多极距电阻率系统。     

Finite element analysis of steep excavation slope failure by CFS theory

The distribution of Coulomb failure stress (CFS) change in the steep excavation slope is calculated by finite element method in this paper, and the failure mechanics under different conditions have been investigated. Comparing the CFSs before and after the slope excavation (stress loading and unloading processes), the dangerous internal zone and the most likely failure external area are attained. Given the shear cracks on the top surface while tensile stress or cracks along the toe of the slope, we analyze the high cutting-angle steep slope in Kaixian county of the Three Gorges Reservoir region. We bring forward that the peak value of CFS after excavation can reach to the order of 0.1 MPa, which is greatly higher than that of before. Our preliminary results are useful for optimizing the reinforcement structure during the steep slope stabilization engineering.     

碳酸盐岩储层缝洞发育带预测:以塔河油田为例

塔河油田碳酸盐岩为古岩溶喀斯特化与受后期构造叠置改造的孔、洞、缝等组成的非均质储层,储层具有规模不同、空间形态不规则、充填性质各异的复杂组合特征以此为对象通过分解地震波场不同特征信号,开发了一系列针对不同储层目标的叠前叠后地震预测技术,不同特征地震预测结果经综合叠置验证分析,实现了残丘体上叠置的孔、洞、缝及古地貌的精细刻画及表征,展示了缝洞空间纵横交错的叠置关系,提高了复杂储层空间展布规律的认识及精确定位。     

Ore-forming fluid and mineralization of Caijiaying and Dajing polymetallic ore deposits

Fluid inclusions from the Dajing and Caijiaying deposits have nearly the same ho-mogenization temperature. Correlation between temperature and salinity shows that both Sn-and Cu-bearing fluids Sn and Cu were present in the Dajing deposit but only one kind of fluids continuously evolved in the Caijiaying deposit. Study on rare earth elements (REE) in ancient fluid from the inclusions indicates that the fluid of Sn mineralizing stage in Dajing was derived from remelting magma of the continental crust, and the fluid of Cu-Pb-Zn mineralizing stage in the Dajing deposit and the fluid of Cu-Pb-Zn mineralization in the Caijiaying deposit were derived from the mantle. It is concluded that the Cu-Pb-Zn mineralizations in the Dajing and Caijiaying deposits resulted from the identical tectono-thermal event of magma-fluids induced by Mesozoic tectonic transition and extension in the eastern part of North China Craton.     

东海八角亭海洋深井台地震监测

上海市地震局设计、建设的中国第1个真正意义上的海洋深井地震观测台位于东海石油平台上,井深780 m,安装2套JDF-1型地震计进行观测。通过对陆域地震台站记录的大地震进行分析比较、方位校准,采用单台地震分析方法,确定2009年5月—2011年6月记录到的136个地震参数,总结海域地震波形特征。结果表明,该海域地震活动性特征与当地地质构造一致。     

金沙江支流黑水河松新电站短须裂腹鱼（Schizothorax wangchiachii）过坝后上溯行为

鱼类过坝后的上溯行为对鱼类寻找适宜的产卵、索饵等功能性栖息地至关重要。现阶段我国大多数研究聚焦于鱼类上溯通过鱼道的游泳行为量化,而过坝后的上溯行为分析鲜有报道。本研究在金沙江下游支流黑水河松新坝址处利用PIT(passive integrated transponder)遥测技术对松新电站过鱼对象短须裂腹鱼(Schizothorax wangchiachii)过坝后的上溯行为开展监测,考虑监测过程中水文情势变化对过坝后上溯行为的影响,采用生存分析方法,构建了耦合多因素(流量、水温、河道涨落水率、昼夜节律、肥满度等)的Cox风险比例回归模型,利用AIC模型准则筛选出最优模型参数,识别了影响鱼类过坝后上溯成功率的关键因素。结果表明:(1)短须裂腹鱼在松新鱼道的上溯效果显著优于河道;(2)水温及河道涨落率是影响短须裂腹鱼过坝后上溯效果的关键因素;(3)水温与短须裂腹鱼过坝后河道上溯成功率呈负相关,当水温超过短须裂腹鱼最适温度后,河道上溯成功率随着温度的上升呈递减趋势;河道涨落水率与短须裂腹鱼过坝后河道上溯成功率呈正相关,其中涨水情势下短须裂腹鱼河道成功上溯的概率高于落水,河道上溯成功率随着涨...     

不同仪器烈度算法在四川地区 历次地震中的比较应用

强震观测资料包括强震动时程记录资料和宏观震害调查资料两大类, 前者是定量的微观数据, 后者则是定性的宏观指标. 本文明晰给出了微观仪器烈度与宏观仪器烈度、 微观考察烈度与宏观考察烈度的概念, 并在此基础上提出了只有在宏观仪器烈度与宏观考察烈度之间进行比较才具有实质性的意义;同时对国内外常见的仪器烈度算法进行了比较性研究, 得出了袁一凡仪器烈度算法可靠性更高的结论;最后以四川地区历年来重要震例的强震动记录为依据, 对修正的袁一凡仪器烈度算法的可靠性进行了比较应用. 结果表明, 对袁一凡仪器烈度算法修正与扩展的应用是可行的, 同时也验证了将微观仪器烈度与宏观考察烈度直接进行比较会存在较大的差距.      

滇西北地区地磁短周期变化特征研究

利用滇西北地磁台阵8个测点的秒采样观测数据,对短周期事件的地磁三分量变化幅度进行统计,得到不同周期的垂直分量和水平分量变化幅度比值ΔZ/ΔH在观测区的空间分布,由此推测地下存在一条NNW走向的高导带,从地壳延伸至上地幔,且位置随深度不断变化。     

全球三大洋海山钴结壳资源量估算

钴结壳具有Co、Ni、Cu和Mn及其他金属的潜在矿产资源和储存在结壳层中古环境信息的双重意义。与深海多金属结核和热液硫化物矿床相比,具有较高Co、Ni和Pt含量的海山钴结壳有可能成为商业勘探的潜在目标。为合理地估算出全球三大洋海山钴结壳资源量,基于我国西太平洋海山钴结壳拖网采样调查资料和对太平洋海山钴结壳资源分布规律和钴结壳矿区圈定参数指标的深入研究,按海山不同高度、不同洋壳年龄赋予不同结壳厚度,进而计算出全球三大洋海山钴结壳分布面积为3 039 452.14km2和干结壳资源量为(1 081.166 1~2 162.332 2)×108 t。太平洋海山钴结壳分布面积为2 123 087.12km2和干结壳资源量为(513.244~1 026.488)×108 t,大西洋海山钴结壳分布面积为512 509.74km2和干结壳资源量为(116.503 2~233.006 4)×108 t,印度洋海山钴结壳分布面积为403 855.28km2和干结壳资源量为(81.484 9~162.969 8)×108 t。三大洋海山钴结壳的Mn、Co、Ni和Cu金属量分别为(138.848 0~277.696 0)×108 t,(3.967 6~7.935 2)×108 t、(2.793 6~5.587 2)×108 t和(0.825 1~1.650 2)×108 t。根据钴结壳的Co含量、Co通量和厚度相关分析,所赋予的钴结壳厚度占理论推测厚度的6.10%~12.20%,这与Ku等得出"钴结壳生长时间约占其整个生命史4%"的认识非常相近。三大洋海山钴结壳实测厚度与赋值厚度对比分析表明,太平洋海山钴结壳赋值厚度平均值为1.87cm,实测厚度平均值为1.77cm,相对误差为5.35%,大西洋和印度洋相对误差分别为18.18%和23.23%。研究数据表明按海山高度和洋壳年龄所赋的钴结壳厚度基本合理,估算出的钴结壳资源量基本可靠。本文首次估算出三大洋海山钴结壳资源量,为整个海盆和三大洋海山钴结壳资源量估算提供了新方法。