Production and Certification of Synthetic Selenium Isotopic Reference Materials

Due to intensive research into selenium isotopes in recent years, the increasing requirement for reliable and comparable measurement results has created a strong demand for selenium isotopic certified reference materials (iCRM) that were previously not available. To address this, eleven selenium iCRMs were developed, including ten synthetic iCRMs (GBW 04447–GBW 04456) and one natural iCRM (GBW 04457). The synthetic iCRMs were prepared with ⁷⁶Se, ⁷⁸Se, ⁸⁰Se and ⁸²Se solutions and a natural selenium solution; the natural iCRM was prepared with highly pure selenium material. The property values of isotope ratios in these iCRMs were certified by calibrated mass spectrometry with a collision cell multi‐collector ICP‐MS. The mass discrimination effect of the instrument was corrected with corresponding ⁷⁸Se/⁷⁶Se isotope mixtures and ⁸²Se/⁷⁶Se isotope mixtures, which were gravimetrically prepared with purified, isotopically enriched selenium materials. Homogeneity and stability tests were performed, and no significant influences were found. The uncertainty of the property values of the iCRMs was evaluated according to the Guide to the Expression of Uncertainty in Measurement (GUM) of ISO/BIPM and ISO Guide 35. The δ^82/76Se value of GBW 04457 relative to NIST SRM 3149 was also calculated. These iCRMs are intended for use in calibration of instruments and evaluation of methods for the determination of selenium isotope ratios.     

Effects of size and strain rate on the mechanical behaviors of rock specimens under uniaxial compression

Size and strain rate are two key factors that dramatically influence the estimation of rock mechanical behaviors. To better understand the effects of size and strain rate on measured rocks, rock specimens with six different sizes were tested at six different strain rates under uniaxial compression using the MTS 815 Rock Mechanics Test System. Having determined that the size and strain rate significantly affect the peak strain, peak stress, elastic modulus, acoustic emission (AE), and failure pattern of the rock specimens, the relation was established between the strength and the size and strain rate of red sandstone. And the variation was revealed among the size and strain rate, the AE, and the failure pattern. It turned out that the peak stress was negatively correlated with the rock size and was positively correlated with the strain rate. When the length to diameter ratio (L/D) of the rock specimen was less than 2.0, the AE appeared mildly. The AE quantities gradually increased before the peak stress, and then sharply decreased after the peak stress. The failure pattern of the rock specimen was relatively complicated, with a fracture plane appearing along the axial direction. Conical failure type was also presented. When the L/D ratio of the specimen was greater than 2.0, the AE characteristics of red sandstone showed the radical model. There were relatively few AE rings before the peak stress. But the AE rings increased suddenly and dramatically during the peak stress. The rock specimens primarily failed with a single shear plane. Moreover, with an increase in the strain rate, the AE activities were enhanced and the AE quantities increased. When the strain rate of the rock specimen was less than 5.0?×?10^?4/s, the rock specimen failed with a shear or tensile-shear pattern. And when the strain rate was greater than 5.0?×?10^?4/s, the rock specimen tended to fail in a conical pattern.     

南海北部潮汕坳陷侏罗系沉积特征及对储层的控制作用研究

南海北部潮汕坳陷侏罗系具有很大的油气勘探潜力,沉积特征对其储层的发育具有明显的控制作用。通过对研究区最新地震资料精细解释,可以划分出4个典型地震反射界面和3个地震反射层,根据层序界面圈出侏罗系分布特征和残留厚度;通过地震相-沉积相转换对比分析研究,识别出侏罗纪地层不同时期的沉积相类型及其分布特征,重塑了潮汕坳陷侏罗系沉积演化史。该区主要发育5类沉积相、8种沉积亚相,其中滨岸三角洲前缘亚相和深水扇中亚相分别控制了碎屑流砂岩优质储层的发育;此外,浊流砂岩储层主要受控于物源供给的影响,距离三角洲砂体朵叶越近,滑塌浊积体数量越多,面积也越大。总体上,滨岸三角洲前缘亚相、深水扇中亚相和滑塌浊积体是研究区良好的储集相带,该类储集体由于埋藏较深加之被泥岩覆盖,对油气聚集较为有利。     

中国航磁大地构造单元划分

本文以我国截止到2011年基本覆盖陆域及部分海域的航磁数据编制的全国航磁系列图为基础,以航磁反映的区域磁场和磁性基底起伏特征为依据,汲取主流大地构造观的划分理念,以板块构造理论及大陆动力学思想为指导,以磁场反映的构造特征为切入点,结合重力、遥感、地质资料对中国陆域构造单元进行划分。大地构造单元划分4个级别:一级构造单元为陆块区和造山系,共划分出8个;二级构造单元为陆块、弧盆系和地块,共划分出32个;三级构造单元为盆地、坳陷带(区)和隆起带(区),共划分出85个;四级构造单元为隆起和坳陷,共划分出332个。本划分方案旨在为油气地质构造背景研究及油气勘探提供一份地球物理资料。文中重点讨论了一、二级构造单元界线厘定的磁场依据及与前人划分存在的不同之处,而三、四级构造单元完全依据磁场及磁性基底起伏情况进行划分,并在盆地和坳陷区给出了深度信息,这为油气勘探者提供了必要的技术支撑。同时,借助丰富的航磁信息提示出一些地质构造方面难解现象,供同行专家参考与讨论。     

碳酸盐台地的类型、特征和沉积模式--兼论华北地台寒武纪陆表海-淹没台地的沉积样式

随着对现代碳酸盐沉积环境的系统调查和解释、以及对碳酸盐沉积原理认识的深化,自20世纪60年代,一系列碳酸盐沉积相模式得以建立,其中最引人注目的是Wilson和Tucker的工作。但在镶边陆棚及缓坡模式得到了广泛认可和使用的同时,对陆表海和淹没台地型沉积未能予以足够的重视。与过去相比,现今的海平面是相对较低的,因而没有出现陆表海广泛发育的情况。但在漫长的地质历史时期,陆表海曾经覆盖了广泛的克拉通区域,是碳酸盐沉积最重要的场所之一。本文在系统总结前人成果的基础上,将用于描述大尺度碳酸盐岩沉积环境的碳酸盐台地分为镶边陆棚、缓坡、陆表海、孤立台地和淹没台地5种类型分别描述,并重点强调了陆表海和淹没台地的沉积模式。华北地台寒武系大面积分布的潮坪沉积、鲕粒滩相灰岩和竹叶状风暴砾屑灰岩,以及频繁出现的台地淹没事件,为阐明陆表海和淹没台地的沉积提供了绝佳实例。这些实例和研究表明了碳酸盐沉积环境的多样性和沉积过程的复杂性,以及将今论古的困难性,从而为碳酸盐沉积原理的认识和沉积环境的解释提供新认识和新思路。     

Simplified formulae for designing coastal forest against tsunami run-up: one-dimensional approach

In the present study, laboratory experiments were conducted to validate the applicability of a numerical model based on one-dimensional nonlinear long-wave equations. The model includes drag and inertia resistance of trees to tsunami flow and porosity between trees and a simplified forest in a wave channel. It was confirmed that the water surface elevation and flow velocity by the numerical simulations agree well with the experimental results for various forest conditions of width and tree density. Further, the numerical model was applied to prototype conditions of a coastal forest of Pandanus odoratissimus to investigate the effects of forest conditions (width and tree density) and incident tsunami conditions (period and height) on run-up height and potential tsunami force. The modeling results were represented in curve-fit equations with the aim of providing simplified formulae for designing coastal forest against tsunamis. The run-up height and potential tsunami forces calculated by the curve-fit formulae and the numerical model agreed within ± 10% error.     

西准噶尔达尔布特蛇绿岩带萨尔托海岩体深部结构、构造特征:地质与地球物理证据

西准噶尔地区分布多条蛇绿混杂岩带,地表地质已有大量研究成果,但蛇绿岩深部结构构造研究相对薄弱,一定程度上制约了该地区地质构造演化的深入认识.为此,本文选取达尔布特蛇绿混杂岩带萨尔托海段开展了大比例尺地质填图配套地面重力、磁法和可控源音频大地电磁测深(CSAMT)等综合测量,获得了该蛇绿岩体地表分布、接触关系以及深部的磁性、密度结构和电性特征,精细刻画了蛇绿岩的深部结构与构造,并进一步分析了其侵位机制和动力学过程.萨尔托海蛇绿岩具有低重力、高磁性和变化范围较宽的电阻率值,岩体整体以构造岩块状产出,表现出挤压逆冲、走滑剪切、破碎蚀变等变形变质.本文及前人研究成果表明,萨尔托海岩体是在近东西向挤压兼走滑应力作用下以斜向楔冲形式构造就位,并进一步受到后期左行走滑和岩浆作用的叠加改造.结合区域构造演化,西准噶尔蛇绿岩的构造侵位与晚石炭世板块汇聚背景下残余洋盆的收缩有关,持续的挤压兼走滑应力使残余洋盆下伏基底蛇绿岩沿断裂构造侵位于上覆沉积地层.     

基于PSR模型的地质遗迹景观脆弱性评价——以永福县为例

地质遗迹景观脆弱性是地质遗迹景观系统对人类活动和自然条件变化反映的重要指标,是评价地质遗迹景观可持续利用的重要指标。文章以永福县典型地质遗迹景观为例,运用地质遗迹景观脆弱性影响因素压力-状态-响应（PSR）模型,从压力、状态、响应3个层面选取17个评价指标,构建地质遗迹景观脆弱性评价指标体系,采用层次分析法（AHP）确定各项指标权重,并运用德尔菲专家咨询法建立5级地质遗迹景观脆弱性划分标准,最后通过综合评分法对永福县地质遗迹景观脆弱性进行评价。结果表明:永福县地质遗迹景观顶子山、小山峡评价值为16.797 0、19.142 1,属微度脆弱;福禄泉、石占溪瀑布评价值为 39.162 8、39.777 5,属低度脆弱;拉孝江、百寿河、板峡湖评价值为 58.546 5、52.330 5、 52.520 9,属中度脆弱;百寿岩、新村屯洞、永福岩评价值为 65.743 0、64.089 3、72.939 5,属高度脆弱,这与实地调查结果相吻合,反映出永福县地质遗迹现状,由此说明PSR模型评价地质遗迹景观脆弱性具有实用性。