西沙群岛生物碳酸盐的成因和沉积:来自活体仙掌藻的证据

A recent island survey reveals that the Xuande Atoll and the Yongle Atoll in the Xisha Islands can be classified into one of two systems: the depleted atoll system and growth atoll system; the survey also indicates that the decreased area of several shoals is an unbearable burden for the Xisha Islands, of which the largest island area is 2.13 km2 and the minimum elevation is 1.4 m. According to a survey on the ecological characteristics of Halimeda in the Laolongtou breaker zone of Shidao Island in the Xisha Islands, the green and white living Halimeda are collected,the isotopic ages of 14 C contained in the Halimeda are shown to be 27 years and 55 years, respectively, and carbonate mainly occurs in five types, i.e., luster, segment, sand, sand grain, and marl in the formation. The Halimeda segments mainly provide the carbonate sediments of long-term biogenic deposits in the reef environment and the annual productivity per area is 60–100 g/m2; the characteristics of the microstructure of the Halimeda are analyzed, the aragonite raphide carbonate is deposited and enriched in the cortexes, medullas and cysts, and the Halimeda generally contain major elements such as C, O, Ca, Cl, Mg, K, Na, S and Al, and are rich in trace elements such as tellurium(Te), rhodium(Rh) and strontium. It is believed that the Halimeda grow slowly,including the biotic community of reef corals in the reef areas, thus they possess an environmental remediation capacity, but it takes much time to remedy the environment, and it is necessary to make the law to protect the diversity and vulnerability of the Xisha marine ecology, the ecology of the reef community and the island environment in a scientific way. As indicated in the survey, under the background of global warming and sea-level rise, the discovery of large amounts of Halimeda in the Laolongtou sea area is significant for the natural increase of the depleted atoll system of the Xuande Atoll, while the Halimeda segments represent the primary form of the fossil Halimeda, of which the species can be identified and preserved in great numbers under geological conditions. The Miocene was discovered in large amounts in the Xichen-1 well, therefore the study on the characteristics and mechanism of Halimeda carbonate sediments plays a pivotal role in the formation and construction of organic reefs in the South China Sea as well as oil and gas exploration.     

基于HJ-1A高光谱的黄河口碱蓬和柽柳盖度反演模型研究

碱蓬和柽柳是黄河口湿地典型的盐生植物类型,是多种保护珍禽的主要栖息地,具有景观尺度较小、分布广且多混生的特点。应用覆盖黄河口北部潮滩的HJ-1A高光谱遥感影像,基于现场测量的端元光谱和从遥感影像中使用顺序最大角凸锥法(SAMCC)自动提取的端元光谱,应用线性光谱分解法(LSU)、正交子空间投影法(OSP)、匹配滤波法(MF)、最小能量约束法(CEM)和自适应一致估计法(ACE)5种不同光谱解混方法进行混合像元光谱解混,对比两种方法得到的端元光谱分别对碱蓬和柽柳盖度的反演能力,并给出相应的反演模型。结果显示:(1)现场测量端元光谱取得了较好的碱蓬和柽柳盖度反演结果,其中应用LSU方法的光谱解混结果与现场测量盖度的决定系数对于碱蓬和柽柳分别达到了0.88和0.95;(2)两种端元获取方式的光谱解混结果中,LSU和OSP方法均获得了较高的相关性,ACE解混方法的相关性都最低;(3)SAMCC方法提取端元光谱对柽柳的分解结果与现场测量盖度的相关性远高于碱蓬。     

基于主成分分析和决策级融合的高光谱图像分类方法研究

为了评价主成分分析方法和决策级数据融合方法对高光谱图像地物分类结果的影响,作者利用各分类器和主成分分量的优势,提出了两组地物分类结果的决策级融合策略,利用8种常用监督分类方法对高光谱原始图像和PCA变换后不同分量组合图分类得到的结果进行决策级融合,并应用覆盖黄河入海口新老河道交界处的CHRIS/PROBA高光谱图像开展实验研究。结果表明:直接采用每类地物分类精度最高的、空穴和缝隙采用总体分类精度最高的融合策略,在综合考虑生产者精度和用户精度的情形下,仅使用最大似然法、支持向量机和人工神经网络3种分类方法,按照分类精度从高到低的顺序进行的融合分类效果最好,总体分类精度为87.82%。与8种监督分类方法中效果最好的最大似然法相比,精度提高了2.7个百分点,同时明显减少了错分现象,尤其是对于分布面积较小的翅碱蓬和柽柳,滩涂被误分为翅碱蓬、芦苇被误分为柽柳的现象大大降低。     

控制点与检查点数量和比例对水深遥感反演精度的影响分析

在水深遥感反演半经验模型中,水深控制点和检查点选取是一项非常重要的工作,前者用于建立实测水深值与遥感影像灰度值之间的数量关系,后者用于评价水深反演精度。但前人在相关研究中并未就控制点和检查点的选取数量和比例给出有实验依据的建议,亦未开展其对水深反演精度的影响分析。针对这个问题,作者使用6020个实测水深点和World View-2、GF-1 WFV、Landsat8 OLI 3种多光谱影像,基于三波段水深反演模型开展了81组实验,分析比较了不同数量和比例的控制点与检查点对反演结果的影响,评价过程利用平均绝对误差(Mean Absolute Error,MAE)、平均相对误差(Mean Relative Error,MRE)和反映实测水深与反演水深相关性的决定系数R2等3种参数。结果表明:(1)当控制点数量达到31个时,水深反演精度即趋于稳定;(2)检查点数量在30个时,其评价指标已可以代表模型反演精度;(3)控制点和检查点的数量比例对反演精度并无影响,但控制点选取过多则会产生反演精度降低的现象,采用人工选取检查点时剔除浅水区的异常点即可有效避免这一问题。     

基于四种水产病原弧菌的简型芯片检测体系的优化

基因芯片技术在病原菌检测领域展现出良好的前景,本文依托水产病原菌基因检测芯片的检测体系,以水产常见病原弧菌的hsp60、toxR基因检测探针为研究对象,系统研究不同点样液配方、寡核苷酸探针浓度、荧光标记物质浓度、杂交温度、杂交时长对芯片杂交效果的影响,并进行相应优化。结果表明,杂交温度为60℃、杂交时长为2h、探针浓度为1μmol/L、Cy3标记的随机引物的用量为150pmol时,芯片的经济性、灵敏度、检测效率达到均衡;以0.1mol/L磷酸氢二钠和25%二甲基亚砜混合溶液作为点样液,效果较好。优化后的芯片对4种弧菌的检测没有出现交叉杂交现象,探针特异性达到100%;对溶藻弧菌全基因组DNA检测灵敏度为10fg,高出PCR方法约2个数量级。     

调和分析方法在海洋磁力测量日变改正中的应用

针对海洋磁力测量数据处理中面临的磁扰期间的日变改正问题,基于傅立叶级数建立了日变数据处理谐波分析模型;通过应用于大批量实测日变数据处理,确定了谐波截断次数,实现了日变基值、平静日变改正和磁扰改正的合理分离。     

“菲特”台风路径和强度预报难点分析

利用1°×1°NCEP再分析资料、NOAA海温资料对其进行分析,结果表明:(1)副高突然加强西进,中低层高压带加强,在台风北侧形成高压坝和强盛偏东气流,是台风路径突然西折的主要原因;(2)"丹娜丝"的活动在一定程度上阻止了副热带高压的南落,有利于副高南侧偏东急流的维持和加强,对"菲特"路径的突然西折起一定作用。敏感性数值试验结果表明"双台风"效应对"菲特"登陆前进一步西折具有决定作用;(3)高低空急流的配置,产生了动力场的耦合作用,加强了台风的对流活动,所释放的潜热可以补偿海温降低的影响,对"菲特"在近海强度维持起到了重要作用;(4)"菲特"的强度和环境风垂直切变的演变规律基本一致,较低的环境风垂直切变是"菲特"在近海强度维持的重要原因。     

物理海洋传感器现状及未来发展趋势

文中对目前我国物理海洋要素观测传感器技术发展现状进行了分析。在国家科技计划支持下,我国的物理海洋观测传感器技术取得了快速发展,但与国际上先进的传感器技术水平相比,国内具有自主知识产权的传感器仍有较大差距。随着未来海洋观测需求的不断发展,小型、轻重量、低功耗、高精度、高灵敏、智能化新型传感器必将是今后5~10年研究与开发的重点。     

长江口洪水期潮波变形数值模拟研究

由长江口现场水文测验资料分析知,洪水期潮波上溯过程中,潮波变形具有先加剧后趋缓的特点。基于非结构网格FVM方法建立大通至外海的大范围数学模型,复演长江口潮波传播过程,以此为基础,研究长江口洪水期潮波变形特征的形成原因。研究认为:洪水期长江口潮波变形转折点位于潮流界上游;转折点下游潮波变形逐渐加剧是由于高低潮位潮波传播速度差异造成的;转折点上游潮波变形趋缓是由于高潮位重力引起的潮波传播阻力对潮波传播影响大于高低潮位潮波传播速度差异造成的。     

Investigation on Cutting Stability of Jacket in Decommissioning Process

Jacket cutting operation is one of the most complicated and highest risk operations in the process of decommissioning offshore piled platform, the security and stability of which must be assured. In this paper, the current research on offshore structure removal and jacket cutting is introduced, on the basis of which the types of load along with the load calculation method are determined. The main influences on the stability of a jacket in cutting are analyzed. The experiment test plan is drawn by using orthogonal testing method, and the formula of critical load during the cutting procedure is deduced by differential evolution algorithm. To verify the method and results of this paper, an offshore piled platform to be decommissioned in the South China Sea is taken for an example, and the detailed schedule for jacket cutting is made with the three-dimensional finite element model of the jacket established. The natural frequency, stress, strain and stability of the jacket during cutting process are calculated, which indicates that the results of finite element analysis agree well with that of the deduced formula. The result provides the scientific reference for guaranteeing the safety of jacket in cutting operation.