海底MT信号采集电路的设计

设计海底大地电磁信号采集电路，需考虑海底信号特征、海上作业以及海底环境等各种因素。分析表明，除遵循电路设计的一般原则外，海底大地电磁测量要重点解决微弱信号检测、智能化数据采集、海底环境监测和同步记录等4个方面的问题。在设计方案中，电路灵敏度达到微伏级；使用嵌入式计算机实现采集控制；对方位、倾斜、振动、温度等参数进行巡回记录；仪器的时钟精度精准到微秒。所研制的电路经过了室内模拟测试和海洋试验。首次采集到中国海域的大地电磁数据。     

Study of crustal structure with S—wave data from Maqen—Jingbian profile

2-D crustal velocity structure and vp/vs are obtained by processing and interpretation of S-wave data from Maqen-Jingbian deep seismic sounding(DSS)profile.The result shows that there exist obvious differences in 2-D S-wave velocity structure and vp/vs ratio structure along the profile.The S-wave velocities are low and vp/vs ration is high for the westem section of the profile and Haiyuan region,while they are normal for the middle and eastern sections.The changes in lithologic characters of two major anomalous zones are discussed according to lateral variation of S-wave velocity structure and vp/vs ratio structure.It is concluded that the development and occurrence of the Haiyuan strong earthquake is not only related to tectonic activities,but also to lithologic characters of the region.     

Exploration and Study on Deep Crust Structural Characteristics in the Jiashi-Artux Seismic Region

The data from two deep seismic sounding profiles was processed and studied comprehensively. The results show that crnst-mantle structures in the investigated region obviously display layered characteristics and velocity structures and tectonic features have larger distinction in different geological structure blocks. The boundary interface C between the upper and lower crust and Moho fluctuate greatly. The shallowest depths of C (30.0km) and Moho (45.5km) under Jiashi deepen sharply from Jiashi to the western Kunlun mountain areas, where the depths of C and Moho are 44.0km and 70.0km, respectively. The higher velocity structures in the Tarim massif determine its relatively “stable“ characteristics in crust tectonics. The phenomenon in the Jiashi region, where the distribution of earthquake foci mostly range from 20kin to 40kin in depth, may infer that the local uplift of C and Moho interface, anomalonsly lower velocity bodies and deep large faults control earthquake occurrence and seismogenic processes in the Jiashi strong earthquake swarm.     

Contemporary crustal deformation of the Chinese continent and tectonic block model

We obtain the preliminary result of crustal deformation velocity field for the Chinese continent by analyzing GPS data from the Crustal Motion Observation Network of China (CMONOC), particularly the data from the regional networks of CMONOC observed in 1999 and 2001. We delineate 9 technically active blocks and 2 broadly distributed deformation zones out of a dense GPS velocity field, and derive block motion Euler poles for the blocks and their relative motion rates. Our result reveals that there are 3 categories of deformation patterns in the Chinese continent. The first category, associated with the interior of the Tibetan Plateau and the Tianshan orogenic belt, shows broadly distributed deformation within the regions. The third category, associated with the Tarim Basin and the region east of the north-south seismic belt of China, shows block-like motion, with deformation accommodated along the block boundaries only. The second category, mainly associated with the borderland of the Tibetan Plateau, such as the Qaidam, Qilian, Xining (in eastern Qinghai), and the Diamond-shaped (in western Sichuan and Yunnan) blocks, has the deformation pattern between the first and the third, i.e. these regions appear to deform block-like, but with smaller sizes and less strength for the blocks. Based on the analysis of the lithospheric structures and the deformation patterns of the regions above, we come to the inference that the deformation modes of the Chinese continental crust are mainly controlled by the crustal structure. The crust of the eastern China and the Tarim Basin is mechanically strong, and its deformation takes the form of relative motion between rigid blocks. On the other hand, the northward indentation of the Indian plate into the Asia continent has created the uplift of the Tibetan Plateau and the Tianshan Mountains, thickened their crust, and raised the temperature in the crust. The lower crust thus has become ductile, evidenced in low seismic velocity and high electric conductivity observed. The brittle part of the crust, driven by the visco-plastic flow of the lower crust, deforms extensively at all scales. The regions of the second category located at the borderland of the Tibetan Plateau are at the transition zone between the regions of the first and the third categories in terms of the crustal structure. Driven by the lateral boundary forces, their deformation style is also between the two, in the form of block motion and deformation with smaller blocks and less internal strength.     

中国油气储层地质研究面临的挑战和发展方向

论述了我国采取“稳定东部 ,发展西部”的油气战略后 ,油气地质所面临的形势 ,以及油气工业的发展对储层地质提出四个领域的挑战 :深部储层、挤压盆地储层、低渗透储层和碳酸盐岩储层 ;这些都是石油勘探开发中久攻不克的难题。根据我国陆上东西部油气区的勘探开发实际和近年的储层研究实践 ,文章系统多视角地分析了这四个难题 ,并提出了相应客观的研究思路和研究方向。     

浙江桐庐晚奥陶世晚期沉积层序和沉积环境分析

文昌组上段顶部是一套潮汐层理非常发育的泥质砂岩或砂质泥岩,存在双向交错层理,层面有雨痕,应为潮坪沉积。潮坪沉积由小型层序构成,小型层序又是由砂、泥质单层组成。砂质单层底部通常为岩性突变面或侵蚀面,砂质纹层较厚,其中可见对称波痕或泥砾;向上砂质纹层变薄,过渡到泥质单层。砂质单层形成于暴风浪时期,泥质单层是风浪衰减后恢复正常的潮汐沉积。因此,小型层序从成因上说是一风暴层序。碎屑成份、砾石成份分析表明沉积物均来自华夏古陆的沉积岩和变质岩基底。物源一致,岩层产状变化不大,反映文昌组沉积环境稳定。岩性、粒度分析表明文昌组是一向上变细、由浅海高能环境向近岸低能环境过渡的沉积层序。文昌组下段为浅海砂岩沉积,上段顶部为潮坪沉积。二者之间是一套夹砾岩透镜体的泥质粉细砂岩,其沉积环境应介于浅海和滨岸之间,为水下岸坡沉积。砾岩层只是大的沉积旋回中出现的事件性水下冲积物。     

虚拟加工环境中的工件动态建模方法研究

提出并实现了基于平面纹理映射的基元立方体构造方法，以之为动态结点建立了动态八叉树结构，实现了支持变精度动态建模的自相似递归算法。该算法确保离正在加工的部位更近的区域有更高的精度，并采用C^ Builder和OpenGL构造了一个集成于虚拟加工环境的可加工工件模型。     

千兆网支持下的城市公众GIS

当前GIS技术的发展已经进入到一个新的阶段,呈现出网络化、专业化、智能化、大众化等特点。公众GIS是近年来新兴的GIS应用领域,它主要的目的是面向公众提供信息服务。介绍了城市公众GIS的基本概念、特点和系统功能,在分析了当前公众GIS存在的问题之后,继而提出一种适合宽带网络(千兆以太网)支持下的公众GIS系统结构,并进一步分析了它的功能和用途。     

STRUCTURAL CHARACTERISTICS OF THE NIUSHOU MOUNTAIN AND ITS GEOLOGICAL SIGNIFICANCE IN CENTRAL NINGXIA

There are many thrust-related structures occurring in the Paleozoic strata of the Niushou Mountain in the central part of Ningxia Hui Autonomous Region. The fault-related folds are the typical structures in this area. Based on the analysis about these structures and their relationships, the processes by which these structures of the Miboshan Formation were formed are reconstructed, and the strata underwent about three stages of deformation: (1) horizontal shortening, (2) folding, and (3) thrusting. And the fact that the Niushou Mountain is the leading edge of an old thrust sheet was proved, the Niushou Mountain, the Daluo Mountain and the Xiaoluo Mountain together constitute the front part of this old thrust zone, so the Niushou Mountain and the Ordovician strata in the central and southern parts of Ningxia now are likely allochthons. In the period from middle Ordovician to Devonian, the areas of the central and southern Ningxia belonged to the back-arc foreland basin of North Qilianshan orogen, which was adjacent to the continent in the north. In the later part of the early Paleozoic period, the Niushou Mountain was formed after the closure of the back-arc foreland basin.     

青藏高原1∶25万区域地质调查地貌年代学研究

高原隆升及剥蚀作用的复杂性与区域差异性以及高原恶劣的气候、地理条件,使得在青藏高原空白区1∶25万区域地质调查中进行地貌年代学研究具有很大的现实意义.由于地貌是高原隆升、环境演化、新构造运动等的信息载体,地貌年代有助于重塑这些地质作用的发生时间及发展过程,因此地貌年代学研究具有重要的技术意义.1∶25万银石山幅的工作表明,地貌年代学调查对高原隆升及环境演化过程研究具有良好效果.