Estimation of Water Particle Velocities by Empirical Transfer Function

-In previous and this studies it appears that the linear and nonlinear wave theory can notaccurately and easily predict the water particle velocities.Therefore,different from the theoretical consider-ations,in this study we have attempted to determine the transfer function empirically.Laboratory experi-ments were performed under various wave conditions.The empirical formulas of the transfer function ofthe wave height,angular frequency and water particle velocity were obtained on the basis of these test databy dimensional analysis and regression analysis.In intermediate and deep water depth conditions,thetransfer function was only a function of a nondimensional parameter which is composed of the angular fre-quency,the depth of the velocity gauge under the still water level,water depth and the acceleration of grav-ity.Finally,the empirical formulas were compared with experimental data and observational data formpresent and Cavaleri's(1978)studies.The empirical formulas were found to be in sufficient correl     

Nonlinear Static Finite Element Stress Analysis of Pipe-in-Pipe Risers

Owing to the complexity of the pipe-in-pipe (PIP) riser system in structure, load and restraint, many problems arise in the structural analysis of the system. This paper presents a new method for nonlinear static finite element stress analysis of the PIP riser system. The finite element (FE) model of the PIP riser system is built via software AutoPIPE 6.1. According to the specialties of a variety of components in the PIP riser system, different elements are used so as to model the system accurately. Allowing for the complication in modeling the effects of seabed restraint, a technique based on the bilinear spring concept is developed to calculate the soil properties. Then, based on a pipeline project, the entire procedure of stress analysis is discussed in detail, including creation of an FE model, processing of input data and analysis of results. A wide range of loading schemes is investigated to ascertain that the stresses remain within the acceptable range of the pipe material strength. Finally, the effects of the location of flanges, the thermal expansion of submarine pipelines and the seabed restraint on stress distribution in the riser and expansion loop are studied, which are valuable for pipeline designers.     

海洋真菌及其生物活性物质多样性研究

海洋微生物种类繁多,是筛选新药的丰富资源宝库。近些年来,作为海洋微生物中重要的组成部分的海洋真菌正成为研究的热点,越来越受到国内外学者的关注。本文详细概述了海洋真菌的定义、分布、海洋真菌研究的历史和现状、其所产生的生物活性物质多样性以及存在的问题。     

Numerical Simulation of Non-Linear Wave Propagation in Waters of Mildly Varying Topography with Complicated Boundary

In this paper, the characteristics of different forms of mild slope equations for non-linear wave are analyzed, and new non-linear theoretic models for wave propagation are presented, with non-linear terms added to the mild slope equations for non-stationary linear waves and dissipative effects considered. Numerical simulation models are developed of non-linear wave propagation for waters of mildly varying topography with complicated boundary, and the effects are studied of different non-linear corrections on calculation results of extended mild slope equations. Systematical numerical simulation tests show that the present models can effectively reflect non-linear effects.     

高原山区局部大地水准面精化方法研究

局部大地水准面精化的实质是精确计算出大地水准面的起伏变化情况。一般情况下,需要密度足够的重力数据,依重力异常密集计算大地水准面差距或高程异常。但是在大陆西部高原山区重力点密度是不够的,无法达到大地水准面精化的目的。本文从理论上证实了用地形和岩石密度数据进行局部大地水准面精化的可行性。     

基于钻孔数据的三维地质建模与可视化研究

三维地质模型能够完整准确地表达复杂地质现象的边界条件及地质体内含的各种地质构造,直观地再现地质单元的空间展布及其相互关系,最大限度地提高地质分析的直观性和准确性,因此三维地质建模已引起地质、采矿、岩土工程等诸多领域的日益重视。笔者在综合考察多种建模方法的基础上,结合工程实践,提出了一种实用的工程地质三维建模实施方法。该方法以钻孔资料和地质剖面数据为三维地质建模的源数据,允许用户手工修正模型剖面地层分界线,从而实现对建模过程的干预和控制,克服了单纯依靠钻孔数据建模结果不精确且难以修正的问题。最后,通过一个研究实例展示了该方法的实际建模效果。     

测量控制网优化设计的可靠性准则法

测量控制网优化设计与网的精度、可靠性、灵敏度以及费用等准则有关,但这些准则之间的关系又十分密切,本文提出了一种基于观测值内部可靠性指标的测量控制网模拟法优化设计新方法,介绍了其原理和特点,并用实例说明了用该方法的计算步骤和优化效益。