山东省蓬莱市蝎子顶金矿地质特征

蓬莱市蝎子顶金矿容矿构造为NW向断裂,具NW向成串分布的特点。NW向压扭性断裂与其派生的断裂裂隙系统是该区金矿床赋存空间的重要构造标志,构造破碎带中的钾化、硅化、黄铁绢英岩化等蚀变是一种直接找矿标志。通过对矿床地质特征的研究,认为该矿床属岩浆低中温热液充填交代蚀变岩型金矿床。     

岷县漳县6.6级地震前区域地壳运动变形背景与断层形变异常特征

利用甘肃岷县漳县6.6级地震区所在的青藏块体东北缘地区的区域水准、GPS、流动重力和跨断层短测线等地形变监测资料,结合地质构造、动力环境和已往的研究结果,分析了不同类型资料反映的震前区域性地壳变形背景、断层形变异常特征和可能的机理.结果认为：（1）岷县漳县6.6级地震前西秦岭、六盘山等构造区不同程度地存在着GPS水平挤压闭锁高应变积累、垂直隆升异常高梯度带和重力升、降差异剧烈变化等中长期背景;（2）震前到震时发震断裂附近及其外围相关构造区域断层形变异常在空间和时间上的起伏波动变化显著,尤其是汶川地震以来的波动变化在一定程度上反映了与本区构造比邻的龙门山断裂带剧烈右旋错动对本区的影响,与本次岷县6.6级地震过程有关;（3）本区有地形变监测资料积累以来缺乏6级以上震例,虽然存在不同程度的中长期形变背景异常,但何时进入短期-短临阶段确实很难把握,需要不断积累总结和探索提高.     

低周反复荷载下Q460钢材框架柱抗震性能分析

为了进一步完善Q460钢材在抗震设计规范中相关限值的要求,本文利用有限元软件ABAQUS,以轴压比、翼缘宽厚比、腹板高厚比和壁板宽厚比为变量,建立了共48根“工”字型框架柱和“箱”型框架柱,分析了其抗震性能。结果表明:翼缘宽厚比对框架柱的能量耗散系数影响较小;能量耗散系数随轴压比、腹板高厚比（“工”字型）和壁板宽厚比（“箱”型）增大而明显减小;框架柱的极限承载力随轴压比的减小及壁板宽厚比和翼缘宽厚比的增大而逐渐增大,当腹板高厚比接近规范限值时,承载力下降趋势明显增大。与采用Q235钢材的框架柱相比,Q460钢材框架柱的延性较小,仅为2左右;当采用Q460钢材时,“工”字型框架柱的极限位移角限值建议取为0.03,“箱”型框架柱的极限位移角限值建议取为0.032。规范中对翼缘宽厚比限值的规定偏于保守,其值最大可取至9。无论是“工”字型框架柱还是“箱”型框架柱,其腹板高厚比均不宜过大。Q460钢材框架柱的刚度退化率随轴压比的增大而增强,且翼缘宽厚比越大,腹板高厚比越小,柱的初始刚度越大,刚度退化程度越明显。     

热力强迫对台风次级环流的作用

本文利用无量纲的台风次级环流方程,用西太平洋地区11年的综合台风资料,计算了热力因子强迫的次级环流。通过计算,得到主要结论如下: 1.非绝热加热和积云热量垂直混合是主要的热力强迫因子,二者的作用具有同样量级。 2.热量的湍流涡旋通量及积云的热量水平输送作用都比较小。 3.Ekman抽吸与积云热量垂直混合是相互促进,共同发展的。有利于次级环流的增强。     

Effect of the Coefficient on the Performance of A Two-Layer Boussinesq-Type Model

The coefficients embodied in a Boussinesq-type model are very important since they are determined to optimize the linear and nonlinear properties.In most conventional Boussinesq-type models,these coefficients are assigned the specific values.As for the multi-layer Boussinesq-type models with the inclusion of the vertical velocity,however,the effect of the different values of these coefficients on linear and nonlinear performances has never been investigated yet.The present study focuses on a two-layer Boussinesq-type model with the highest spatial derivatives being 2 and theoretically and numerically examines the effect of the coefficient on model performance.Theoretical analysis show that different values for(0.13≤α≤0.25)do not have great effects on the high accuracy of the linear shoaling,linear phase celerity and even third-order nonlinearity for water depth range of 0相似文献   

Methods and procedures to determine the outer limits of the continental shelf beyond 200 nautical miles

This paper establishes techniques and methods to determine a variety of boundaries associated with 200 nautical miles beyond the continental shelf. The methods, based on topography, slope and second-deriv- ative profile integrated analysis, are now able to identify automatically the foot of the continental slope （FOS）. By analyzing the sedimentary profile, the points of 1% sediment thickness are recognized. Through the intersection, cut, deletion and mergence calculation of the extrapolated data set of fLxed-point series, the method succeeds in generating automatically the extrapolated boundaries, including the FOS＋60 M line, the 350 M line, and the 2500 m＋100 M line. In addition, based on the automatic analysis of the topographic profile, it can be applied to determine rapidly the points of maximum water depth. Taking the northern Okinawa Trough （OT） as an example, these methods are used to calculate and examine the boundaries in- cluded in the Submission by the People＇s Republic of China Concerning the Outer Limits of the Continental Shelf beyond 200 Nautical miles in Part of the East China Sea （ECS）; the boundaries thus derived have a solid scientific and rational basis.     

多尺度分形压缩感知遥感成像方法

针对压缩感知(compressive sensing,CS)在遥感成像应用中存在的若干瓶颈,提出一种基于多尺度透镜组的分形压缩感知成像方法。一方面,通过多尺度透镜组避免了基于稀疏表示的CS成像方式在大视场角观测条件下出现海量运算开销的问题;另一方面,运用分形维度代替l1范数最小化作为求解CS成像问题中的目标函数,实现了中、高分辨率遥感成像在图像细节水平上的质量提升。试验表明,多尺度分形压缩感知成像方法与传统CS成像相比,不仅能达到遥感成像的时效性要求,而且其细节层次上的成像质量也大幅提高。     

黎平双江电站水库暴雨洪水设计

该文选用参证站资料的方法,对黎平县双江电站水库1954—2021年近68 a来逐年最大日降水量采用PearsonⅢ型研究方法和贵州省暴雨洪水计算公式进行研究。结果表明：黎平双江电站水库年最大日降水量年变化呈上升趋势,2010年以后上升趋势较显著。暴雨洪水设计以H_1d=119.29 mm、C_v=0.47、C_s/C_v=3.5作为研究成果,防洪标准按50 a一遇的暴雨洪水设计成果为P=2.0%,日最大降水量=277 mm、洪峰流量=2509 m³·s^-1;洪水校核按500 a一遇的暴雨洪水设计成果为P=0.2%,日最大降水量=391 mm、洪峰流量=3905 m³·s^-1;消能防冲设计标准按30 a一遇的设计成果为P=3.3%,日最大降水量=252 mm、洪峰流量=2209 m³·s^-1。研究成果对黎平双江电站水库预防灾害性强降水、安全渡汛和水库优化调度、提高产能具有十分重要...     

岩石嵌固掏挖基础抗拔承载特性及其影响因素研究

岩石嵌固掏挖基础目前已经广泛应用于电力基础工程中。原状土由于受扰动较小,胶结性强,具有良好的抗剪强度,对掏挖基础抗拔承载力具有重要影响,因此研究原状土参数变化对基础上拔承载性能的影响规律具有重要意义。结合现场试验,建立数值模型,研究土体黏聚力、内摩擦角、弹性模量对基础上拔承载性能的影响规律。研究表明:土体内摩擦角和黏聚力对基础抗拔承载力具有较大影响,而弹性模量影响程度较低;参数的变化对土体塑性区发展规律影响较小。     

Using Array Methods to Identify and Process Weak Signals Generated by the Brightlight(Ⅰ) 50t Explosion

Waveforms generated by the 50t explosion of project Brightlight(Ⅰ) were recorded by HILR array.Using array techniques,the author performed identification,f-k analysis,velocity spectrum analysis,etc.of the weak signals.The analysis results show that the signal-to-noise ratio after beamforming was obviously enhanced,and the signal could be clearly shown.The energy from this explosion was mainly concentrated in the 1 ～ 8Hz range from f-k analysis.The velocity spectrum gave clear positions of event phases,which could not be seen in the original weak signals.The maximum energy distribution obtained by the Beaman method is close to the theoretical value in the azimuth-slowness domain.