起伏地形条件下的磁异常二维聚焦反演及应用

地形对磁异常的反演和解释有很大的影响,特别是磁异常体贴近地表分布时更是如此,为了降低这种影响,笔者推导出了基于有限延深的二度厚板状体的带地形的磁异常正演公式,并提出了一种基于起伏地形的地下网格模型剖分的新方法。同时,聚焦反演对物性体有很强的聚焦效果,如果能够预先判断磁异常主要由地下浅层的强磁性体所引起,则可以考虑采用聚焦反演的方法得到磁性体的位置,显然这种方法非常适合铁矿体的反演。笔者将带地形的二维磁异常正演与聚焦反演结合起来,进行了相应的模型试验,并与水平地形下的聚焦反演及起伏地形下的光滑反演进行对比,验证了这种结合的有效性。最后,将该方法应用于新疆特克斯的磁异常剖面,对该剖面的磁性体分布做出了合理的解释。     

滇东北毛坪铅锌矿床的成矿时代:闪锌矿Rb-Sr定年

毛坪铅锌矿床是滇东北地区代表性矿床之一,目前尚缺乏精确的成矿年代学数据。该文对选自块状铅锌矿石的4件闪锌矿单矿物样品进行了Rb-Sr同位素定年,获得等时线年龄为321.7±5.8 Ma(MSWD=1.5),表明毛坪铅锌矿床的主成矿作用发生于石炭纪。此外,闪锌矿~(87)Sr/~(86)Sr初始值为0.712166±0.000017,低于大陆地壳~(87)Sr/~(86)Sr平均值(0.719)且高于地幔Sr初始值(0.707),暗示成矿物质主要来源于大陆地壳并混有少量地幔物质。综合前人研究成果,作者认为毛坪铅锌矿属后生矿床,与晚二叠世峨眉山大火成岩省玄武岩浆活动无成因联系,类似于典型的MVT矿床,且滇东北地区可能发育多期铅锌矿化作用。     

朝鲜半岛古元古代摩天岭群的碎屑锆石U-Pb年龄及其地质意义

克拉通内部活动带变质沉积建造蕴藏了早期超大陆形成中地体聚-散动力学过程的重要信息,碎屑锆石年代学则是揭示这种信息的最佳工具之一。针对华北(中-朝)克拉通最具代表性的古元古代活动带(辽-吉-朝活动带)中巨量沉积建造精细表征方面的空白区域,本文开展了朝鲜半岛检德地区摩天岭群的碎屑锆石年代学研究。SIMS U-Pb定年结果显示,北大川组变火山碎屑岩样品的锆石年龄谱记录了约2.53Ga的主要年龄峰值和约2.19Ga的最年轻峰值,说明北大川组开始沉积的时代应该晚于2.2Ga。南大川组变沉积岩样品碎屑锆石记录的最年轻峰值年龄为约2.02Ga,说明南大川组的沉积时代应该不早于2.02Ga;其锆石年龄谱记录了一个主要年龄峰值区域(2.02~2.18Ga)、一个次要年龄峰值(约2.46Ga)和一些2.78~3.30 Ga的古老年龄,指示其物质源区主要为同区古元古代地质体和邻近地体上的太古宙变质基底。区域对比表明,摩天岭群与中国境内辽吉活动带中的辽河群及集安群/老岭群具有基本一致的碎屑锆石年龄谱,说明它们不仅是同一时代的产物,而且分享类似的物质源区。这些时代一致、物源相近的沉积建造可以为甄别古元古代辽-吉-朝活动带的大地构造属性提供重要参考。与沉积年龄相近的碎屑锆石占据主导的碎屑锆石年龄谱反映了汇聚板块边缘各类盆地的典型特征,而相悖于大部分碎屑锆石年龄远大于地层沉积年龄的裂谷型盆地。     

基于FLUENT的内孤立波质量源造波方法

为研究内孤立波质量源数值造波方法,本文采用两个点源形式的质量源,分别放置于两层流体的上下层中作为内孤立波激发源。推导源项表达式,从不可压缩流体的Navier-Stokes方程出发,结合内孤立波Kd V、e Kd V理论,基于商业软件FLUENT发展了一种内孤立波质量源数值造波方法。通过数值模拟,分析了质量源造波过程中内孤立波的生成过程,并将数值模拟结果同理论及实验作对比。结果表明:基于此方法生成的内孤立波波形、波高及波致水平速度与理论及实验吻合度较好,该方法是可行的,并且耗时短、效率高。     

考虑地球曲率影响的重力中间层校正计算及其精度分析

介绍一种考虑地球曲率影响的“球冠模型” 重力中间层校正算法,并通过不同算例对比该算法与以往“圆柱体模型”算法之间的差值。结果表明,其差值的数量级最大可达0.4 mGal。     

Production and Certification of Synthetic Selenium Isotopic Reference Materials

Due to intensive research into selenium isotopes in recent years, the increasing requirement for reliable and comparable measurement results has created a strong demand for selenium isotopic certified reference materials (iCRM) that were previously not available. To address this, eleven selenium iCRMs were developed, including ten synthetic iCRMs (GBW 04447–GBW 04456) and one natural iCRM (GBW 04457). The synthetic iCRMs were prepared with ⁷⁶Se, ⁷⁸Se, ⁸⁰Se and ⁸²Se solutions and a natural selenium solution; the natural iCRM was prepared with highly pure selenium material. The property values of isotope ratios in these iCRMs were certified by calibrated mass spectrometry with a collision cell multi‐collector ICP‐MS. The mass discrimination effect of the instrument was corrected with corresponding ⁷⁸Se/⁷⁶Se isotope mixtures and ⁸²Se/⁷⁶Se isotope mixtures, which were gravimetrically prepared with purified, isotopically enriched selenium materials. Homogeneity and stability tests were performed, and no significant influences were found. The uncertainty of the property values of the iCRMs was evaluated according to the Guide to the Expression of Uncertainty in Measurement (GUM) of ISO/BIPM and ISO Guide 35. The δ^82/76Se value of GBW 04457 relative to NIST SRM 3149 was also calculated. These iCRMs are intended for use in calibration of instruments and evaluation of methods for the determination of selenium isotope ratios.     

Effects of size and strain rate on the mechanical behaviors of rock specimens under uniaxial compression

Size and strain rate are two key factors that dramatically influence the estimation of rock mechanical behaviors. To better understand the effects of size and strain rate on measured rocks, rock specimens with six different sizes were tested at six different strain rates under uniaxial compression using the MTS 815 Rock Mechanics Test System. Having determined that the size and strain rate significantly affect the peak strain, peak stress, elastic modulus, acoustic emission (AE), and failure pattern of the rock specimens, the relation was established between the strength and the size and strain rate of red sandstone. And the variation was revealed among the size and strain rate, the AE, and the failure pattern. It turned out that the peak stress was negatively correlated with the rock size and was positively correlated with the strain rate. When the length to diameter ratio (L/D) of the rock specimen was less than 2.0, the AE appeared mildly. The AE quantities gradually increased before the peak stress, and then sharply decreased after the peak stress. The failure pattern of the rock specimen was relatively complicated, with a fracture plane appearing along the axial direction. Conical failure type was also presented. When the L/D ratio of the specimen was greater than 2.0, the AE characteristics of red sandstone showed the radical model. There were relatively few AE rings before the peak stress. But the AE rings increased suddenly and dramatically during the peak stress. The rock specimens primarily failed with a single shear plane. Moreover, with an increase in the strain rate, the AE activities were enhanced and the AE quantities increased. When the strain rate of the rock specimen was less than 5.0?×?10^?4/s, the rock specimen failed with a shear or tensile-shear pattern. And when the strain rate was greater than 5.0?×?10^?4/s, the rock specimen tended to fail in a conical pattern.     

南海北部潮汕坳陷侏罗系沉积特征及对储层的控制作用研究

南海北部潮汕坳陷侏罗系具有很大的油气勘探潜力,沉积特征对其储层的发育具有明显的控制作用。通过对研究区最新地震资料精细解释,可以划分出4个典型地震反射界面和3个地震反射层,根据层序界面圈出侏罗系分布特征和残留厚度;通过地震相-沉积相转换对比分析研究,识别出侏罗纪地层不同时期的沉积相类型及其分布特征,重塑了潮汕坳陷侏罗系沉积演化史。该区主要发育5类沉积相、8种沉积亚相,其中滨岸三角洲前缘亚相和深水扇中亚相分别控制了碎屑流砂岩优质储层的发育;此外,浊流砂岩储层主要受控于物源供给的影响,距离三角洲砂体朵叶越近,滑塌浊积体数量越多,面积也越大。总体上,滨岸三角洲前缘亚相、深水扇中亚相和滑塌浊积体是研究区良好的储集相带,该类储集体由于埋藏较深加之被泥岩覆盖,对油气聚集较为有利。