南大西洋沉积物中多环芳香化合物的组成特征研究

10 samples of sediments obtained from the South Mid-Atlantic Ridge were measured for the abundances and distributions of polycyclic aromatic compounds(PAHs). The total concentrations of PAHs(∑PAHs) ranged from 2.768 to 9.826 μg/g dry sediment. The ∑PAHs was higher in sample 22V-TVG10 and sample 26V-TVG05 which were close to hydrothermal fields, with the lowest value in sample 22V-TVG14 which was farthest from hydrothermal fields, suggesting a probable hydrothermal origin of ∑PAHs of samples. Approximately nine kinds of PAHs were identified, and low molecular mass tricyclic and tetracyclic aromatic compounds were predominant in the samples. The concentrations of fluoranthene which were typical as hydrothermal alteration compounds were the highest among PAHs with dry weight between 0.913–3.157 μg/g. The phenanthrene homologue was most abundant in the samples, and the ratios between parent phenanthrene and methylphenanthrene which probably reflected the degree of hydrothermal alteration ranged from 0.097 to 1.602. The sample 22V-TVG10 possessing a maximum ratio value showed the intense influence of the hydrothermal alteration on this sample, which might further imply that PAHs in sediments were mainly derived from the hydrothermal alteration.     

布拜图对PACMANUS热液区Si-Fe-Mn-羟基氧化物沉淀条件的指示

Utilizing Si, Fe and Mn concentrations within the end-member PACMANUS hydrothermal fluid, Si-Fe-MnH_2 O Pourbaix diagrams were constructed at 300°C and 25°C. The Pourbaix diagrams show that the main Si, Fe and Mn oxides species precipitating from the hydrothermal fluid were Si O_2, Fe(OH)_3, Fe_3(OH)_8, Mn_3O_4, and Mn_2O_3 at 25°C. During mixing of hydrothermal fluid with seawater, Si O_2 precipitated earlier than FeMn-oxyhydroxides because of the lower stability boundary. Then Fe(OH)_2 precipitated first, followed by Fe_3(OH)_8 and Fe(OH)_3, and last, small amounts of Mn_3O_4 and Mn_2O_3 precipitated. Fe(OH)_3 was readily deposited in alkaline solution with little influence by Eh. There were many Si-Fe-Mn-concentric particles in the polished sections of the massive precipitates collected from PACMANUS. In the concentric nucleus and ellipsoid, Si oxides precipitated first before the hydrothermal fluid had mixed with seawater. In the concentric nucleus, after the precipitation of Si oxides, the increase of p H and Eh promoted the precipitation of Mn oxides around the Si oxides. In the large ellipsoid, the precipitation of Fe was divided into two periods. In the early period, increase of p H value of hydrothermal fluid produced by low-temperature convection and an input of a small volume of seawater promoted a small amount of Fe(OH)_3 to precipitate in the Si-rich core. In the late period, after complete mixing with seawater and the resultant fluid was close to neutral or slightly alkaline in p H, Fe(OH)_3 was easily precipitated from the solution and distributed around the Si-rich core.     

深海会聚区波导不变量特征研究及应用

为了解决深海会聚区目标及其运动态势难以判断的问题,在研究会聚区形成条件和其声场传播规律以及波导不变量理论的基础上,对典型深海环境不同位置的声强距离-频率分布图中的干涉条纹特征进行理论分析和仿真验证。结果表明,深海会聚区存在与其他区域不同的干涉条纹特征,其对应的波导不变量?值为负。本文提出了利用会聚区特有的干涉条纹特征,对会聚区目标及其运动态势进行初步判断的方法,仿真结果和试验数据表明,判断方法具有可行性和有效性。     

基于VB6.0的水准网数据处理程序的实现

基于VB6.0语言环境设计了水准网综合数据处理的程序,实现了基于平差基准的最小二乘估计和抗差估计,自动搜索闭合条件、计算闭合差,弥补了现有矿区水准网平差程序或软件中存在的不足,针对程序实现中的关键性问题进行了比较详细的分析并给出了部分程序实现的代码,并通过实测数据进行了验证。     

高精度CORS站像控点自动提取方法

CORS站持续稳定运行产生了海量高精度定位点数据,如何挖掘提取高精度可用像控点,以替代部分像控点人工选择或外业测绘工作,具有重要推广价值。本文提出了一种基于高精度CORS定位数据的像控点自动提取方法,并研发了像控点自动提取工具。首先采用Douglas-Peucker算法实现轨迹简化;然后利用ST-DBSCAN提取聚类中心;最后进一步栅格化,优化提取得到高可用像控点集。试验结果表明,像控点提取结果的准确率在94%以上,大大减少了像控点采集的工作量,重复利用高精度像控点信息具有广阔应用前景。     

时空遥感云计算平台PIE-Engine Studio的研究与应用

随着遥感大数据时代的到来,为快速处理和分析海量遥感数据,国内外涌现了众多遥感云计算平台,使得全球尺度、长时间序列遥感数据的快速分析和应用成为可能。本文在分析国内外遥感云计算平台现状的基础上,针对大数据时代国内缺少功能完备的遥感云计算平台,且国外遥感云计算平台对国产卫星数据支持不足等问题,基于容器云技术,构建了包含国产卫星数据且集数据、算力和技术于一体的时空遥感云计算平台PIE（Pixel Information Expert）-Engine Studio,实现了脚本驱动的遥感数据的按需获取以及海量数据的快速处理。采用Landsat 8数据,以生长季植被指数NDVI（Normalized Difference Vegetation Index）的计算为例,对比了本平台与GEE（Google Earth Engine）的数据处理能力。结果表明,由于计算资源的限制,本平台的计算和导出时间均比GEE稍长,但计算结果的空间分布一致,其中近68%的值均分布在（0.48,0.77）,且二者差值的95.33%集中在（-0.13,0.13）,结果较为可信。因此,本文构建的基于共享、开放的中国自主遥感云计算平台PIE-Engine Studio,可为地球科学领域的研究提供数据和算力支持,将有助于推进中国遥感云计算平台的发展进程,推动国产卫星数据在云计算平台上的应用。     

利用激光点云数据进行露天矿采剥工程量的计算方法

露天矿测量验收主要采用全站仪等单点式测量的方式,存在采样密度低、测量周期较长等不足。针对以上问题,采用三维激光扫描技术在露天矿中获取点云数据,并通过布料模拟算法和三角网计算体积算法,计算得到采剥工程量。经实验验证,与传统三角网体积计算法得到的采剥工程量相比,精度提高了23倍。     

航空重力探测目标发现率研究

航空重力测量相比地面测量可快速地完成区域性的重力数据采集。为在发现异常目标体的同时,高效、安全地完成航空重力测量,作者提出了一种新的目标体发现率的评价方式,指导最优化测量参数设计。通过可靠弱异常的判定标准定义目标体可发现的临界条件,确定目标体可发现概率。通过理论模型分析目标体参数(埋深、水平尺寸等)、测网间距和飞行高度对发现率的影响。绘制目标体发现率关于飞行高度、测线距和测点距的三维图像。     

甘肃侵入岩及岩石构造组合特征

本文简要叙述了甘肃侵入岩的时空分布、构造岩浆旋回和构造岩浆岩带划分,将甘肃侵入岩划分为4个构造岩浆旋回、5个构造岩浆岩省、10个构造岩浆岩带,简述了各构造岩浆岩省侵入岩基本特征和岩石构造组合特征,探讨了其形成的大地构造环境,利用现有资料初步建立了甘肃侵入岩年代格架。