Kinematics of stars in Kovalsky-Kapteyn figures. II

Rostov State Pedagogical Institute; All-Union Scientific Research Institute Gradient. Translated from Astrofizika, Vol. 33, No. 3, pp. 379–393, November–December, 1990.     

Cytoplasmic regionalization in starfish oocyte occurrence and localization of cytoplasmic determinants responsible for the formation of archenteron and primary mesenchyme in starfish (asterias amurensis) oocytes

Starfish oocytes with intact germinal vesicles (GVs) were cut along desired planes with glass needles or ligated using silk thread loops into two parts and allowed to mature in vitro, and inseminated. The experimental results showed that (1) only the parts with GVs or partial GV contents (PGVCs) cleaved, those without any GV materials did not; but nucleated and non-nucleated fragments cut from mature eggs were able to divide; (2) the development of animal parts of oocytes containing GVs or PGVCs was like that of animal fragments of matured oocytes with female pronuclei; most of them gave rise to permanent blastulae, and just a few formed ectodermal vesicles with a little primary mesenchyme; (3) a large part of vegetal fragments with GVs or PGVCs, and the vegetal parts of mature eggs without female pronuclei developed into small but normal embryos; (4) the fragments containing GVs or PGVCs obtained from the oocytes along a plane parallel to the animal-vegetal (A-V) axis developed as normally as the halves (with or without female pronuclei) severed from mature eggs along the same axis. Based on the data above, it was concluded that (1) the non-chromatin materials in the oocyte GVs are indispensable for successful fertilization and cleavage of starfish eggs; (2) some factor (s) located asymmetrically in the vegetal hemispheres of starfish oocytes is (are) responsible for formation of the archenteron and primary mesenchyme. It is evident from the above findings that the oocyte cytoplasm of the starfish had already regionalized before the GV break-down. Contribution No. 1722 from the Institute of Oceanology, Academia Sinica     

Physical parameters of near-Earth asteroid 1982 DV

Visual and infrared observations were made of Amor asteroid 1982 DV during its discovery apparition. Broadband visual and near-infrared photometry shows that it is an S-class asteroid. Narrowband spectrophotometry shows an absorption feature due to olivine or pyroxene or both centered at 0.93 μm. Applying a nonrotating thermal model to 10-μm photometry, the geometric albedo is calculated to be approximately 0.27. The geometric albedo for a slowly rotating, rocky surface was calculated for 1 night to be 0.15, consistent with S-class asteroid albedos. Thus, 1982 DV is either one of the most reflective S-class asteroids known, or a significant amount of bare rock is exposed on the asteroid's surface. For the nonrotating model, ellipsoidal dimensions for 1982 DV are 3.5 × 1.4 × 1.4 km.     

OTEC cold-water pipe research

Shelf-mounted Ocean Thermal Energy Conversion (OTEC) plants require installation of cold-water pipes (CWP) on slopes of40degto depths of 1000 m. In addition, tower platforms containing OTEC power systems may be located on lesser sloped terrain near shore and exposed to special environmental loading problems affecting foundation design. Shelf-mounted installations require careful attention to site selection and geotechnical considerations for foundation integrity on sloped surfaces. This paper primarily discusses research associated with cold-water pipe and foundation installations on steep slopes, although research continues on tower platforms located on the shelf. At least five nations are in various stages of development of OTEC systems for island applications. Each of their systems is either shelf mounted or land based and requires that a large diameter cold-water pipe be installed on a steep slope to provide cold water from 1000-m depths. In addition to the installation and deployment of the large cold-water pipe, the most significant problem is the design and installation of suitable foundations that will last for several decades. To date there is very little experience in the offshore industry for large installations on steep slopes. A major scale-model research project is underway on the slopes of the island of Hawaii. A section of pipe 2.4 m in diameter and 24 m long was installed using combination concrete foundations and joints. The pipe and foundations are fully instrumented to measure environmental loading forces due principally to currents and waves. Environmental measurements will also be taken in the test area. The measurement data will be used to validate available analytical models for subsequent use in aiding industry in providing more cost-effective designs for OTEC pipes and foundations.     

A note on the kinematics of the tachyon fluid

It is shown that the kinematical parameters associated with the congruence formed by tachyonic motion can be defined in the manner of Greenberg, but not that of Ehlers. The space-like counterpart of Raychaudhuri's equation has also been obtained.     

Three dimensional simulation of fluid flow in X‐ray CT images of porous media

A numerical scheme is developed in order to simulate fluid flow in three dimensional (3‐D) microstructures. The governing equations for steady incompressible flow are solved using the semi‐implicit method for pressure‐linked equations (SIMPLE) finite difference scheme within a non‐staggered grid system that represents the 3‐D microstructure. This system allows solving the governing equations using only one computational cell. The numerical scheme is verified through simulating fluid flow in idealized 3‐D microstructures with known closed form solutions for permeability. The numerical factors affecting the solution in terms of convergence and accuracy are also discussed. These factors include the resolution of the analysed microstructure and the truncation criterion. Fluid flow in 2‐D X‐ray computed tomography (CT) images of real porous media microstructure is also simulated using this numerical model. These real microstructures include field cores of asphalt mixes, laboratory linear kneading compactor (LKC) specimens, and laboratory Superpave gyratory compactor (SGC) specimens. The numerical results for the permeability of the real microstructures are compared with the results from closed form solutions. Copyright © 2004 John Wiley & Sons, Ltd.     

地壳对海洋潮汐的响应

应用三维动态有限元方法研究了中国北部地区的地壳对邻近的渤海与黄海海平面变化的响应。虽然此应力场过于微弱不足以引发地震，但发现应力集中的位置及应力场变化较大的位置恰好与某些现代地震的震中一致。这一结果表明研究地壳对广泛分布的载荷的响应对研究区域地震构造是有帮助的。     

Enzymatic synthesis of methyl-galactoaldehyde

Methyl-galactosides were oxidized at room temperature by galactose oxidase in a one-step reaction and afforded methyl-galactoaldehyde in excellent yield and high purity. The resulting galactoaldehyde as a useful intermediate can be directly used in glycopeptide synthesis.     

Fluid Inclusion Feature of Gold-Bearing Quartz Veins from the Jinniushan Gold Deposit, Shandong, China

The auriferous veins at Jinniushan occurs within the Jinniushan faulted zone in the Kunyushan Granite. Optical observation reveals that gold ore body formed during the main stage of hydrothermal activity. Detailed geothermometric studies of fluid inclusions from the veins show that the forming temperature ranges between 130℃ and 370℃ and the salinity is from 4.01 to 15.21 wvt percent NaCl. The ore-forming fluid is featured by low to moderate salinity, and low to moderate temperature. According to investigations of the values of vapor/liquid and temperatures of the ore-forming fluids, we propose that the boiling fluid inclusions exist in the main mineralization stages. Fluid boiling is suggested as a mechanism for the precipitation of gold from the hydrothermal fluid in the Jinniushan gold deposit.