Simultaneous Organic Matter and Nitrogen Removal from Piggery Slaughterhouse Wastewater Using Bioaugmented Gaslift Membrane Bioreactor

A single bioaugmentation reactor and a side-stream gaslift membrane bioreactor combined with bioaugmentation are conducted to treat real wastewater from a centralized piggery slaughterhouse in Vietnam. The bioaugmented reactor is inoculated with heterotrophic microorganisms (Bacillus sp.) isolated from piggery slaughterhouse wastewater. The results of a single bioaugmentation experiment show high removal efficiency of chemical oxygen demand (COD) (84.8%–97.5%) and total nitrogen (TN) (69.9%–87.2%) at loading rates of 1.28–3.89 and 0.14–0.37 kg m⁻³ d⁻¹, respectively. The combined system demonstrates a significantly higher TN removal efficiency (89.0%–96.1%) (p < 0.001), more stable flux (36.0–38.4 L m⁻² h⁻¹), and transmembrane pressure (0.95–1.05 bar), and better capacity of separation of solid–liquid phases compared to the single bioaugmentation. High COD and TN removal efficiency is possibly due to assimilation and simultaneous nitrification and denitrification processes. The results of this study also indicate the feasibility and propitious efficiency of the bioaugmented gaslift membrane bioreactor for piggery slaughterhouse wastewater treatment.     

Relaxation base seismic isolator

This paper deals with the use, for seismic applications, of a Maxwell element in parallel with a low damping isolator. The study of the properties of the frequency response function shows that this isolator is capable to reduce the base displacement of isolated structures with no considerable amplification of the non‐isolated modes. This is, also, confirmed by the floor response spectra under earthquake excitations. Hence, the previously mentioned isolator does not present the drawbacks met when base displacement is reduced by increasing damping. Moreover, it seems that its performance is comparable with that of more elaborated and expensive techniques combining passive and semi‐active devices. Copyright © 2016 John Wiley & Sons, Ltd.     

Global Oscillations at Low Frequency from the SOHO mission (GOLF)

The GOLF experiment on the SOHO mission aims to study the internal structure of the sun by measuring the spectrum of global oscillations in the frequency range 10^–7 to 10^–2 Hz. Bothp andg mode oscillations will be investigated, with the emphasis on the low order long period waves which penetrate the solar core. The instrument employs an extension to space of the proven ground-based technique for measuring the mean line-of-sight velocity of the viewed solar surface. By avoiding the atmospheric disturbances experienced from the ground, and choosing a non-eclipsing orbit, GOLF aims to improve the instrumental sensitivity limit by an order of magnitude to 1 mm s^–1 over 20 days for frequencies higher than 2.10^–4 Hz. A sodium vapour resonance cell is used in a longitudinal magnetic field to sample the two wings of the solar absorption line. The addition of a small modulating field component enables the slope of the wings to be measured. This provides not only an internal calibration of the instrument sensitivity, but also offers a further possibility to recognise, and correct for, the solar background signal produced by the effects of solar magnetically active regions. The use of an additional rotating polariser enables measurement of the mean solar line-of-sight magnetic field, as a secondary objective.     

A simple approach to estimating freshwater discharge in branched estuarine systems

In tidal estuaries, quantifying freshwater discharge is still a difficult problem that has not yet been overcome due to the inherent difficulty in measuring and analysing the tidal discharge, especially during periods of low river flow. Because observations are often made in the stations further upstream, where the ratio of river to tidal discharge is large, it remains difficult to determine the discharge rate in the saline region. Freshwater discharge estimation is even more difficult in a branched estuary system having multiple diversion channels that connect with each other at a junction. To date, several methods have been developed for estimating freshwater discharge in estuaries. The most widely used are analytical and conceptual models that employ salinity as the principal trace and numerical simulations. However, these methods are very time consuming and costly as they require large sets of observations before the computations can take place. This paper presents a simple approach to investigating the discharge distribution over branched channels by considering the energy loss due to friction. We develop an analytical model that can obtain the discharge rate quantitatively at a junction where the main flow bifurcates into two branches. The model uses the bed roughness, tidal water level, and cross‐sectional profile under tidally averaged conditions as input data. Two selected estuarine systems in the Hiroshima delta in Japan and the Mekong delta in Vietnam have been investigated. Computations of the newly developed model show good agreement with earlier published results computed by sophisticated analytical and numerical models.     

Distribution and Characteristics of Hazardous Geological Features in the Marine Coastal and Offshore Areas of Zhejiang Province,East China Sea

Newly acquired high-resolution shallow seismic profiles(7069 km in length) in the coastal and offshore areas of Zhejiang Province, East China Sea, China, have revealed eight marine hazardous geological features: shallow gas, sand ridges, erosion ditches, scarps, irregular bedrock features, underwater shoals, buried paleo-channels, and submarine deltas. Based on the seismic profiles, we have constructed a marine geological map of these hazardous features. Shallow gas accumulations are common and occur mainly in two separate nearshore regions that cover 4613 and 3382 km~2 respectively. There are also scattered shallow gas accumulations in the offshore area, typically accompanied by paleo-channels that occur mainly in the middle of the study area. Sand ridges, erosion ditches, scarps, and irregular bedrock features are found mainly in the northeast of the study area in association with each other. In the southeastern part of the study area, the sand ridges have a linear form and trend NW–SE, representing the western part of the linear sand ridges in the East China Sea. The maximum slope gradient is 1?, which suggests that this area is prone to landslides. These hazardous marine geological features are important to marine and engineering activities in this region.     

A fractal model for streaming potential coefficient in porous media

Streaming potential is the result of coupling between a fluid flow and an electric current in porous rocks. The modified Helmholtz–Smoluchowski equation derived for capillary tubes is mostly used to determine the streaming potential coefficient of porous media. However, to the best of our knowledge, the fractal geometry theory is not yet applied to analyse the streaming potential in porous media. In this article, a fractal model for the streaming potential coefficient in porous media is developed based on the fractal theory of porous media and on the streaming potential in a capillary. The proposed model is expressed in terms of the zeta potential at the solid?liquid interface, the minimum and maximum pore/capillary radii, the fractal dimension, and the porosity of porous media. The model is also examined by using another capillary size distribution available in published articles. The results obtained from the model using two different capillary size distributions are in good agreement with each other. The model predictions are then compared with experimental data in the literature and those based on the modified Helmholtz–Smoluchowski equation. It is shown that the predictions from the proposed fractal model are in good agreement with experimental data. In addition, the proposed model is able to reproduce the same result as the Helmholtz–Smoluchowski equation, particularly for high fluid conductivity or large grain diameters. Other factors influencing the streaming potential coefficient in porous media are also analysed.     

Investigation of the accelerated carbonation of a MgO-based binder used to treat contaminated sediment

A MgO-based binder developed to simultaneously solidify/stabilize contaminated sediment and store CO₂ has been described previously. The objectives of the study presented here were to investigate the kinetics of the carbonation reactions of the binder and the extent to which carbonation occurred and to identify the optimal conditions for using the binder. The carbonation reaction was clearly faster and the degree of carbonation higher at CO₂ concentrations of 50 and 100% than in the ambient atmosphere (which contains 0.04% CO₂). A modified unreactive core model adequately described the kinetics. The rate constants were 0.0217–0.319 h^?1 and were proportional to the degree of carbonation. A high degree of carbonation, 93.8%, was achieved at a CO₂ concentration of 100%. The water to sediment ratio strongly affected carbonation, the optimal ratio being around 0.7. The relative humidity did not strongly affect the carbonation performance. The carbonation products were magnesite (MgCO₃) and nesquehonite (MgCO₃·3H₂O). X-ray diffraction analysis showed that brucite (Mg(OH)₂) was not present, suggesting that brucite was very quickly transformed into magnesium carbonates, the presence of which was confirmed by thermal gravimetric analysis. The results indicated that, in 7 d, 1 kg of binder could sequester up to 0.507 kg of CO₂ in a 100% CO₂ atmosphere. The results indicate that the MgO-based binder has great potential to be used to sequester CO₂ under accelerated carbonation conditions.     

The Early Triassic Indosinian orogeny in Vietnam (Truong Son Belt and Kontum Massif); implications for the geodynamic evolution of Indochina

New structural field data at various scale and ⁴⁰Ar–³⁹Ar geochronological results, from the basement rocks in the Truong Son belt and Kontum Massif of Vietnam, confirm that ductile deformation and high-temperature metamorphism were caused by the Early Triassic event of the Indosinian Orogeny in the range of 250–240 Ma. A compilation of isotopic data obtained in other countries along the Sibumasu–Indochina boundary broadly indicates same interval of ages. This tectonothermal event is interpreted as the result of a synchronous oblique collision of Indochina with both Sibumasu and South China, inducing dextral and sinistral shearing along E–W to NW–SE and N–S fault zones, respectively. The collision along Song Ma follows the northwards subduction of Indochina beneath South China and the subsequent development of the Song Da zone which in turn was affected by the Late Triassic Indosinian phase of shortening. Within the Indochina plate, internal collisions occurred coevally in the Early Triassic, as along the Poko suture, at the western border of the Kontum Massif.     

Marble-hosted ruby deposits from Central and Southeast Asia: Towards a new genetic model

Marble-hosted ruby deposits represent the most important source of colored gemstones from Central and South East Asia. These deposits are located in the Himalayan mountain belt which developed during Tertiary collision of the Indian plate northward into the Eurasian plate. They are spatially related to granitoid intrusions and are contained in platform carbonates series that underwent high-grade metamorphism. All occurrences are located close to major tectonic features formed during Himalayan orogenesis, directly in suture zones in the Himalayas, or in shear zones that guided extrusion of the Indochina block after the collision in South East Asia. Ar–Ar dating of micas syngenetic with ruby and U–Pb dating of zircon included in ruby gives evidence that these deposits formed during Himalayan orogenesis, and the ages document the extensional tectonics that were active, from Afghanistan to Vietnam, between the Oligocene and the Pliocene.The petrography shows that ruby-bearing marbles formed in the amphibolite facies (T = 610 to 790 °C and P ~ 6 kbar). A fluid inclusion study defines the conditions of gem ruby formation during the retrograde metamorphic path (620 < T < 670 °C and 2.6 < P < 3.3 kbar) for the deposits of Jegdalek, Hunza and northern Vietnam.Whole rock analyses of non-ruby-bearing marbles indicate that they contain enough aluminum and chromiferous elements to produce all the ruby crystals that they contain. In addition, (C, O)-isotopic analyses of carbonates from the marbles lead to the conclusion that the marbles acted as a metamorphic closed fluid system that were not infiltrated by externally-derived fluids. The carbon isotopic composition of graphite in marbles reveals that it is of organic origin and that it exchanged C-isotopes with the carbonates during metamorphism. Moreover, the O-isotopic composition of ruby was buffered by metamorphic CO₂ released during devolatilisation of marble and the H-isotopic composition of mica is consistent with a metamorphic origin for water in equilibrium with the micas. The (C, O, H)-isotopic compositions of minerals associated with marble-hosted ruby are all in agreement with the hypothesis, drawn from the unusual chemistry of CO₂–H₂S–COS–S₈–AlO(OH)-bearing fluids contained in fluid inclusions, that gem ruby formed at P ~ 3 kbar and 620 < T < 670 °C, during thermal reduction of evaporite by organic matter, at high temperature-medium pressure metamorphism of platform carbonates during the Tertiary India–Asia collision. The carbonates were enriched in Al- and chromiferous-bearing detrital minerals, such as clay minerals that were deposited on the platform with the carbonates, and in organic matter. Ruby formed during the retrograde metamorphic path, mainly by destabilization of muscovite or spinel. The metamorphic fluid system was rich in CO₂ released from devolatilisation of carbonates, and in fluorine, chlorine and boron released by molten salts (NaCl, KCl, CaSO₄). Evaporites are key to explaining the formation of these deposits. Molten salts mobilized in situ Al and metal transition elements contained in marbles, leading to crystallization of ruby.     

Mechanism of two rapid and long-runout landslides in the 16 April 2016 Kumamoto earthquake using a ring-shear apparatus and computer simulation (LS-RAPID)

Around hundred landslides were triggered by the Kumamoto earthquakes in April 2016, causing fatalities and serious damage to properties in Minamiaso village, Kumamoto Prefecture, Japan. The landslides included many rapid and long-runout landslides which were responsible for much of the damage. To understand the mechanism of these earthquake-triggered landslides, we carried out field investigations with an unmanned aerial vehicle to obtain DSM and took samples from two major landslides (Takanodai landslide and Aso-ohashi landslide) to measure parameters of the initiation and the motion of landslides. A series of ring-shear tests and computer simulations were conducted using a measured Kumamoto earthquake acceleration record from KNet station KMM005, 10 km west of Aso-ohashi landslide. The research results supported our assumed mechanism of sliding-surface liquefaction for the rapid and long-runout motion of these landslides.