Hydrochemistry of groundwaters in a spa area of Korea: an implication for water quality degradation by intensive pumping

A geochemical study was carried out in a small spa area (Onyang Spa, Korea) where intensive pumping of deep thermal groundwater (1 300 000 m³ year⁻¹) is taking place. This has caused the deep fractures to lose their artesian pressure and the upper shallow fractures have been encroached by shallow, cold waters. To quantify the influence of long‐term heavy pumping on the quality of the geothermal water, groundwater sampling and chemical analysis, water‐level measurement, and well loggings were performed for the selected deep thermal wells and shallow cold wells. Chemical analysis results indicate a big contrast in water chemistry and origins between the two water types. Shallow groundwater shows a wider concentration ranges in solutes that are closely related to human activity, illustrating the water's vulnerability to contamination near the land surface. Plots of water chemistry as a function of fluoride reveal that the quality of the thermal water was greatly influenced by the shallow, cold groundwater and that intensive pumping of the deep thermal groundwater has caused the introduction of shallow groundwater into the deeper fractures. Although the deep and the shallow fractures were piezometrically separated to some extent, a mixing model based on fluoride and nitrate indicated that the cold‐water fractions in the thermal wells are up to 50%. This suggests that the thermal water is faced with water quality degradation by the downward flow of the shallow, cold water. Restriction on the total of all the pumpage permits per unit area is suggested to restore the artesian pressure of the deep thermal aquifer and to prevent cold‐water intrusion in the study area. Copyright © 2004 John Wiley & Sons, Ltd.     

Analysis of Determinants for an Enhanced and Long-lasting Coastal Convective System by Means of a Case Study(26 July 2011)

A precipitation system developed continuously along the western coastline of the Korean Peninsula and created considerable precipitation both along the coast and inland on 26 July 2011. In this study, the causes for this nearshore convective system are investigated from observations and the results of model experiments. Three-dimensional radar fields clearly show that a change of wind at the surface border played an important role in the development of the nearshore convection system. The simulation results, which are very similar to the observations, show that the surface border generated and maintained the convergence zone. The roughness change enhanced the convergence, and the interaction between the deepening cold pool and downward flow maintained the convergence zone. The surface mechanical discontinuity affected by the roughness change between sea and land formed the convergence (gradient of wind stress),which induced momentum transfer to the upper layer. The cold pool created a steep gradient of potential temperature and provided the reason for the propagated convergence zone with the downward flow. The maximum value of the surface change factor, which comprises the influencing factors for the long-lasting convective system, reflects the enhancement of the system at the coast.     

Recent Progress in Dual-Polarization Radar Research and Applications in China

Dual-polarization(dual-pol)radar can measure additional parameters that provide more microphysical information of precipitation systems than those provided by conventional Doppler radar.The dual-pol parameters have been successfully utilized to investigate precipitation microphysics and improve radar quantitative precipitation estimation(QPE).The recent progress in dual-pol radar research and applications in China is summarized in four aspects.Firstly,the characteristics of several representative dual-pol radars are reviewed.Various approaches have been developed for radar data quality control,including calibration,attenuation correction,calculation of specific differential phase shift,and identification and removal of non-meteorological echoes.Using dual-pol radar measurements,the microphysical characteristics derived from raindrop size distribution retrieval,hydrometeor classification,and QPE is better understood in China.The limited number of studies in China that have sought to use dual-pol radar data to validate the microphysical parameterization and initialization of numerical models and assimilate dual-pol data into numerical models are summarized.The challenges of applying dual-pol data in numerical models and emerging technologies that may make significant impacts on the field of radar meteorology are discussed.     

The differentiated impact of emissions trading system based on company size

Most countries implementing an emissions trading system (ETS), such as EU member states, California in the US, or South Korea, are generally targeting large sized companies, which consume energy above a specific threshold. However, previous studies using computable general equilibrium (CGE) models have analyzed climate policies without considering company size. This may have led to inaccurate results because the impacts of climate policy would differ depending on the coverage of regulated companies. Accordingly, this study examines the environmental and economic impacts of greenhouse gas emission reduction policies, assuming policy results vary by firm size, as covered by the Korean emission trading system. To this end, a CGE model with a separate social accounting matrix based on company size is used to compare three scenarios that reflect different types of carbon pricing methods. The results show that greenhouse gases will be reduced to a lower extent and utility will decrease more if mitigation policies are only imposed to large companies.

Key policy insights

• Carbon pricing policies should consider the different impacts on companies of different sizes and industry sectors.

• Without considering the different sizes of companies covered by an ETS, the expected carbon price and its economic impact will be underestimated.

• Small and medium-sized companies will face more negative impacts than large companies in some industry sectors under an ETS, even if the mitigation burden is only faced by large companies.

     

Under-ice measurements of suspended particulate matters using ADCP and LISST-Holo

Ocean Science Journal - Using a mooring package comprising an acoustic Doppler current profiler (ADCP) and holographic imaging system, a 1-day ice camp study was performed under the Arctic sea ice...     

Chemical Characteristics of Carbonaceous Aerosols During Dust Storms over Xi'an in China

Characterization of carbonaceous aerosols including CC （carbonate carbon）, OC （organic carbon）, and EC （elemental carbon） were investigated at Xi＇an, China, near Asian dust source regions in spring 2002. OC varied between 8.2 and 63.7μgm^- 3, while EC ranged between 2.4 and 17.2 μ m^-3 during the observation period. OC variations followed a similar pattern to EC and the correlation coefficient between OC and EC is 0.89 （n=31）. The average percentage of total carbon （TC, sum of CC, OC, and EC） in PM2.5 during dust storm （DS） events was 13.6%, which is lower than that during non-dust storm （NDS） periods （22.7%）. CC, OC, and EC accounted for 12.9%, 70.7%, and 16.4% of TC during DS events, respectively. The average ratio of OC/EC was 5.0 in DS events and 3.3 in NDS periods. The OC-EC correlation （R^2=0.76, n=6） was good in DS events, while it was stronger （R^2=0.90, n=25） in NDS periods. The percentage of watersoluble OC （WSOC） in TC accounted for 15.7%, and varied between 13.3% and 22.3% during DS events. The distribution of eight carbon fractions indicated that local emissions such as motor vehicle exhaust were the dominant contributors to carbonaceous particles. During DS events, soil dust dominated the chemical composition, contributing 69% to the PM2.5 mass, followed by organic matter （12.8%）, sulfate （4%）, EC （2.2%）, and chloride （1.6%）. Consequently, CC was mainly entrained by Asian dust. However, even in the atmosphere near Asian dust source regions, OC and EC in atmospheric dust were controlled by local emission rather titan the transport of Asian dust.     

Radar Data Assimilation for the Simulation of Mesoscale Convective Systems

A heavy rainfall case related to Mesoscale Convective Systems (MCSs) over the Korean Peninsula was selected to investigate the impact of radar data assimilation on a heavy rainfall forecast. The Weather Research and Forecasting (WRF) three-dimensional variational (3DVAR) data assimilation system with tuning of the length scale of the background error covariance and observation error parameters was used to assimilate radar radial velocity and reflectivity data. The radar data used in the assimilation experiments were preprocessed using quality-control procedures and interpolated/thinned into Cartesian coordinates by the SPRINT/CEDRIC packages. Sensitivity experiments were carried out in order to determine the optimal values of the assimilation window length and the update frequency used for the rapid update cycle and incremental analysis update experiments. The assimilation of radar data has a positive influence on the heavy rainfall forecast. Quantitative features of the heavy rainfall case, such as the maximum rainfall amount and Root Mean Squared Differences (RMSDs) of zonal/meridional wind components, were improved by tuning of the length scale and observation error parameters. Qualitative features of the case, such as the maximum rainfall position and time series of hourly rainfall, were enhanced by an incremental analysis update technique. The positive effects of the radar data assimilation and the tuning of the length scale and observation error parameters were clearly shown by the 3DVAR increment.     

Mineralogical, fluid inclusion, and stable isotope constraints on mechanisms of ore deposition at the Samgwang mine (Republic of Korea)—a mesothermal, vein-hosted gold–silver deposit

The Samgwang mine is located in the Cheongyang gold district (Cheonan Metallogenic Province) of the Republic of Korea. It consists of eight massive, gold-bearing quartz veins that filled NE- and NW-striking fractures along fault zones in Precambrian granitic gneiss of the Gyeonggi massif. Their mineralogy and paragenesis allow two separate vein-forming episodes to be recognized, temporally separated by a major faulting event. The ore minerals occur in quartz and calcite of stage I, associated with fracturing and healing of veins. Hydrothermal wall-rock alteration minerals of stage I include Fe-rich chlorite (Fe/(Fe+Mg) ratios 0.74-0.81), muscovite, illite, K-feldspar, and minor arsenopyrite, pyrite, and carbonates. Sulfide minerals deposited along with electrum during this stage include arsenopyrite, pyrite, pyrrhotite, sphalerite, marcasite, chalcopyrite, galena, argentite, pyrargyrite, and argentian tetrahedrite. Only calcite was deposited during stage II. Fluid inclusions in quartz contain three main types of C–O–H fluids: CO₂-rich, CO₂–H₂O, and aqueous inclusions. Quartz veins related to early sulfides in stage I were deposited from H₂O–NaCl–CO₂ fluids (1,500–5,000 bar, average 3,200) with T _htotal values of 200°C to 383°C and salinities less than about 7 wt.% NaCl equiv. Late sulfide deposition was related to H₂O–NaCl fluids (140–1,300 bar, average 700) with T _htotal values of 110°C to 385°C and salinities less than about 11 wt.% NaCl equiv. These fluids either evolved through immiscibility of H₂O–NaCl–CO₂ fluids as a result of a decrease in fluid pressure, or through mixing with deeply circulated meteoric waters as a result of uplift or unloading during mineralization, or both. Measured and calculated sulfur isotope compositions (δ³⁴S_H2S = 1.5 to 4.8‰) of hydrothermal fluids from the stage I quartz veins indicate that ore sulfur was derived mainly from a magmatic source. The calculated and measured oxygen and hydrogen isotope compositions (δ¹⁸O_H2O = −5.9‰ to 10.9‰, δD = −102‰ to −87‰) of the ore-forming fluids indicate that the fluids were derived from magmatic sources and evolved by mixing with local meteoric water by limited water–rock exchange and by partly degassing in uplift zones during mineralization. While most features of the Samgwang mine are consistent with classification as an orogenic gold deposit, isotopic and fluid chemistry indicate that the veins were genetically related to intrusions emplaced during the Jurassic to Cretaceous Daebo orogeny.     

Paper I – Optically stimulated luminescence (OSL) dating of perennially frozen deposits in north‐central Siberia: OSL characteristics of quartz grains and methodological considerations regarding their suitability for dating

Arnold, L. J. & Roberts, R. G. 2011: Paper I – Optically stimulated luminescence (OSL) dating of perennially frozen deposits in north?central Siberia: OSL characteristics of quartz grains and methodological considerations regarding their suitability for dating. Boreas, Vol. 40, pp. 389–416. 10.1111/j.1502‐3885.2011.00209.x. ISSN 0300?9483. Optically stimulated luminescence (OSL) dating of coarse‐grained quartz is increasingly being used as the main chronological tool in late Quaternary palaeoenvironmental reconstructions of Siberia. However, relatively little information has been published on the suitability of OSL dating for the various types of perennially frozen sediments found in this region. Here we provide a systematic examination of the quartz luminescence characteristics of 21 perennially frozen samples from the Taimyr Peninsula and adjacent coastal lowlands of north‐central Siberia, and discuss their implications for the reliability of single‐grain and multi‐grain OSL chronologies in such contexts. The results of this study suggest that the quartz luminescence characteristics of these samples are, in principle, favourable for OSL dating but, in practice, require that a series of validation checks are made of the chosen experimental conditions. If these tests are satisfied, then reliable OSL chronologies should be obtained for sedimentary deposits in this region. Importantly, however, the single‐grain and multi‐grain aliquot equivalent dose (D_e) distribution characteristics for our samples reveal that there are advantages in targeting certain types of depositional settings for OSL dating studies of Siberian sediments. We also show that samples from the same depositional settings, and even from the same sites, do not necessarily display similar D_e distribution characteristics. The latter complication favours the use of single‐grain analysis to unravel the bleaching and burial histories of young (mid‐ to late Holocene) sediments in these Arctic environments.