Phase transformations of enstatite in spherical shock waves

The analysis of available theoretical evaluations and experimental data reveals discrepancies and makes it possible to formulate the goals for the comprehensive study of the behavior of enstatite MgSiO₃ in shock isentropic waves of various scale and intensity. The paper presents the layout and results of an explosion experiment on the compression of an enstatite sphere with spherical shock waves and the subsequent recovery of the experimental material and its examination in discrete zones (along the sphere radius) that were produced by shock waves in the material. The latter were examined with the application of scanning electron microscopy, Raman spectroscopy, and X-ray diffraction analysis. The comparison of the systematic variations in the texture, chemistry, and phase composition of enstatite along the sphere radius with calculated pressure P(R, t) and temperature T(R, t) values led us to the following conclusions: enstatite starts melting on an isentrope upon pressure relief after shock wave compression at ?? _xx ?? 80 GPa and melts on the front of the spherically converging shock wave at ?? _xx ?? 160 GPa and T ?? 6300 K. Our laboratory experiments with shock waves were the world??s first in which enstatite was loaded with spherical converging shock isentropic waves and which provided evidence that shock wave-loaded MgSiO₃ shows certain morphological and mineralogical features never before detected in this mineral loaded with plane shock wave of smaller amplitude and duration. Goals are formulated for the further studying of shock wave-loaded materials, and the necessity is discussed for conducting an explosion experiment with a five to seven times greater spherical system in order to increase the duration of the shock wave loading impulse.     

Flow behind an attached shock wave in a radiating gas

A simple method is used to determine the curvature of an attached shock wave and the flow variable gradients behind the shock curve at the tip of a straight-edged wedge placed symmetrically in a supersonic flow of a radiating gas near the optically thin limit. The shock curvature and the flow variable gradients along the wedge at the tip are computed for a wide range of upstream flow Mach numbers and wedge angles. Several interesting results are noted; in particular, it is found that the effect of an increase in the upstream flow Mach number or the radiative flux is to enhance the shock wave curvature which, however, decreases with an increase in the specific heat ratio or the wedge angle.     

Trophic ecology of Mustelus schmitti (Springer, 1939) in a nursery area of northern Patagonia

Mustelus schmitti is an endangered endemic shark of the southwest Atlantic, and an important economical resource in Argentina, Brazil and Uruguay. The objective of this study was to describe the trophic ecology of M. schmitti in Anegada Bay, its feeding strategy and diet composition, along with the possible dietary shifts, due to season, sex, ontogeny and the different geographical features of the bay. Our results show that M. schmitti is a carnivorous opportunistic predator, feeding on a variety of benthic invertebrates. The diet presented seasonal and ontogenetic variations, while no differences in diet composition were observed between sexes or the different sampling sites. This species behave as a generalize feeder, with a wide trophic spectrum and a diverse diet.     

Tides in the Tongan Region of the Pacific Ocean

Tidal levels and currents in the Tongan region of the Pacific were simulated using a two-dimensional frequency-domain finite element model. The eight major diurnal and semidiurnal tidal constituents were modeled successfully, using open boundary conditions taken from a global tidal model based on the Topex/Poseidon satellite altimeter. Comparison of model results with observations from the single tide gauge site in the area were later used to adjust the boundary conditions. The validity of omitting horizontal eddy viscosity from the finite element model was checked by running an equivalent finite difference model. The results show that although the submarine Tongan ridge does not appear to trap tidal energy, there are residual tidal currents and possible recirculations which are capable of influencing biological productivity around Tonga. The model results are reduced to a simple method for predicting tidal heights in outlying areas, based only on the tidal calendar for the capital, Nuku'alofa.     

南极GPS数据质量分析

以多路径误差和电离层延迟为评价指标,利用TEQC软件和QCVIEW软件对南极埃默里冰架、内陆冰盖、纳拉峡海湾、拉斯曼丘陵的实测GPS数据以及部分IGS站点的数据进行了数据质量分析,得到结论： 1)在同一站点上,L2上的多路径误差总比L1上的多路径误差要大;2)在南极不同环境下的多路径误差不同;3)纬度和太阳活动剧烈程度是影响南极地区GPS数据电离层延迟大小的两个重要因素。     

A comparative study of geothermal and meteorological records of climate change in Kamchatka

To reconstruct the recent climate history in Kamchatka, a series of repeated precise temperature logs were performed in a number of boreholes located in a broad east-west strip (between 52 and 54°N) in the central part of Kamchatka west of Petropavlovsk-Kamchatski. Within three years more than 30 temperature logs were performed in 10 holes (one up to six logs per hole) to the depth of up to 400 metres. Measured temperature gradients varied in a broad interval 0 to 60 mK/m and in some holes a sizeable variation in the subsurface temperatures due to advective heat transport by underground water was observed. Measured data were compared with older temperature profiles obtained in the early eighties by Sugrobov and Yanovsky (1993). Even when older data are of poorer precision (accuracy of about 0.1 K), they presented valuable information of the subsurface temperature conditions existing 20–25 years ago. Borehole observations and the inverted ground surface temperature histories (GSTHs) used for the paleoclimate reconstruction were complemented with a detailed survey of meteorological data. Namely, the long-term surface air temperature (SAT) and precipitation records from Petropavlovsk station (in operation since 1890) were used together with similar data from a number of local subsidiary meteo-stations operating in Central Kamchatka since 1950. Regardless of extreme complexity of the local meteorological/climate conditions, diversity of borehole sites and calibration of measuring devices used during the whole campaign, the results of the climate reconstruction supported a general warming of about 1 K characteristic for the 20th century, which followed an inexpressive cooler period typical for the most of the 19th century. In the last three to four decades the warming rate has been locally increasing up to 0.02 K/year. It was also shown that the snow cover played a dominant role in the penetration of the climate “signal” to depth and could considerably smooth down the subsurface response to the changes occurred on the surface.     

Inverse Analysis of Deep Excavation Using Differential Evolution Algorithm

This paper presents the applications of the differential evolution (DE) algorithm in back analysis of soil parameters for deep excavation problems. A computer code, named Python‐based DE, is developed and incorporated into the commercial finite element software ABAQUS, with a parallel computing technique to run an FE analysis for all trail vectors of one generation in DE in multiple cores of a cluster, which dramatically reduces the computational time. A synthetic case and a well‐instrumented real case, that is, the Taipei National Enterprise Center (TNEC) project, are used to demonstrate the capability of the proposed back‐analysis procedure. Results show that multiple soil parameters are well identified by back analysis using a DE optimization algorithm for highly nonlinear problems. For the synthetic excavation case, the back‐analyzed parameters are basically identical to the input parameters that are used to generate synthetic response of wall deflection. For the TNEC case with a total of nine parameters to be back analyzed, the relative errors of wall deflection for the last three stages are 2.2, 1.1, and 1.0%, respectively. Robustness of the back‐estimated parameters is further illustrated by a forward prediction. The wall deflection in the subsequent stages can be satisfactorily predicted using the back‐analyzed soil parameters at early stages. Copyright © 2014 John Wiley & Sons, Ltd.     

Tsunami Probability in the Caribbean Region

We calculated tsunami runup probability (in excess of 0.5 m) at coastal sites throughout the Caribbean region. We applied a Poissonian probability model because of the variety of uncorrelated tsunami sources in the region. Coastlines were discretized into 20 km by 20 km cells, and the mean tsunami runup rate was determined for each cell. The remarkable ~500-year empirical record compiled by O’Loughlin and Lander (2003) was used to calculate an empirical tsunami probability map, the first of three constructed for this study. However, it is unclear whether the 500-year record is complete, so we conducted a seismic moment-balance exercise using a finite-element model of the Caribbean-North American plate boundaries and the earthquake catalog, and found that moment could be balanced if the seismic coupling coefficient is c = 0.32. Modeled moment release was therefore used to generate synthetic earthquake sequences to calculate 50 tsunami runup scenarios for 500-year periods. We made a second probability map from numerically-calculated runup rates in each cell. Differences between the first two probability maps based on empirical and numerical-modeled rates suggest that each captured different aspects of tsunami generation; the empirical model may be deficient in primary plate-boundary events, whereas numerical model rates lack backarc fault and landslide sources. We thus prepared a third probability map using Bayesian likelihood functions derived from the empirical and numerical rate models and their attendant uncertainty to weight a range of rates at each 20 km by 20 km coastal cell. Our best-estimate map gives a range of 30-year runup probability from 0–30% regionally.     

The Central-Western Mediterranean: Anomalous igneous activity in an anomalous collisional tectonic setting

The central-western Mediterranean area is a key region for understanding the complex interaction between igneous activity and tectonics. In this review, the specific geochemical character of several ‘subduction-related’ Cenozoic igneous provinces are described with a view to identifying the processes responsible for the modifications of their sources. Different petrogenetic models are reviewed in the light of competing geological and geodynamic scenarios proposed in the literature.Plutonic rocks occur almost exclusively in the Eocene–Oligocene Periadriatic Province of the Alps while relatively minor plutonic bodies (mostly Miocene in age) crop out in N Morocco, S Spain and N Algeria. Igneous activity is otherwise confined to lava flows and dykes accompanied by relatively greater volumes of pyroclastic (often ignimbritic) products. Overall, the igneous activity spanned a wide temporal range, from middle Eocene (such as the Periadriatic Province) to the present (as in the Neapolitan of southern Italy). The magmatic products are mostly SiO₂-oversaturated, showing calcalkaline to high-K calcalcaline affinity, except in some areas (as in peninsular Italy) where potassic to ultrapotassic compositions prevail. The ultrapotassic magmas (which include leucitites to leucite-phonolites) are dominantly SiO₂-undersaturated, although rare, SiO₂-saturated (i.e., leucite-free lamproites) appear over much of this region, examples being in the Betics (southeast Spain), the northwest Alps, northeast Corsica (France), Tuscany (northwest Italy), southeast Tyrrhenian Sea (Cornacya Seamount) and possibly in the Tell region (northeast Algeria).Excepted for the Alpine case, subduction-related igneous activity is strictly linked to the formation of the Mediterranean Sea. This Sea, at least in its central and western sectors, is made up of several young (< 30 Ma) V-shaped back-arc basins plus several dispersed continental fragments, originally in crustal continuity with the European plate (Sardinia, Corsica, Balearic Islands, Kabylies, Calabria, Peloritani Mountains). The bulk of igneous activity in the central-western Mediterranean is believed to have tapped mantle ‘wedge’ regions, metasomatized by pressure-related dehydration of the subducting slabs. The presence of subduction-related igneous rocks with a wide range of chemical composition has been related to the interplay of several factors among which the pre-metasomatic composition of the mantle wedges (i.e., fertile vs. refractory mineralogy), the composition of the subducting plate (i.e., the type and amount of sediment cover and the alteration state of the crust), the variable thermo-baric conditions of magma formation, coupled with variable molar concentrations of CO₂ and H₂O in the fluid phase released by the subducting plates are the most important.Compared to classic collisional settings (e.g., Himalayas), the central-western Mediterranean area shows a range of unusual geological and magmatological features. These include: a) the rapid formation of extensional basins in an overall compressional setting related to Africa-Europe convergence; b) centrifugal wave of both compressive and extensional tectonics starting from a ‘pivotal’ region around the Gulf of Lyon; c) the development of concomitant Cenozoic subduction zones with different subduction and tectonic transport directions; d) subduction ‘inversion’ events (e.g., currently along the Maghrebian coast and in northern Sicily, previously at the southern paleo-European margin); e) a repeated temporal pattern whereby subduction-related magmatic activity gives way to magmas of intraplate geochemical type; f) the late-stage appearance of magmas with collision-related ‘exotic’ (potassic to ultrapotassic) compositions, generally absent from simple subduction settings; g) the relative scarcity of typical calcalkaline magmas along the Italian peninsula; h) the absence of igneous activity where it might well be expected (e.g., above the hanging-wall of the Late Cretaceous–Eocene Adria–Europe subduction system in the Alps); i) voluminous production of subduction-related magmas coeval with extensional tectonic régimes (e.g., during Oligo-Miocene Sardinian Trough formation).To summarize, these salient central-western Mediterranean features, characterizing a late-stage of the classic ‘Wilson Cycle’ offer a ‘template’ for interpreting magmatic compositions in analogous settings elsewhere.