Is the transition impact to post‐impact rock complete? Some remarks based on XRF scanning,electron microprobe,and thin section analyses of the Yaxcopoil‐1 core in the Chicxulub crater

Abstract The transition from impact to post‐impact rocks in the Yaxcopoil‐1 (Yax‐1) core is marked by a 2 cm‐thick clay layer characterized by dissolution features. The clay overlies a 9 cm‐thick hardground, overlying a 66 cm‐thick crossbedded unit, consisting of dolomite sandstone alternating with thin micro‐conglomerate layers with litho‐ and bioclasts and the altered remains of impact glass, now smectite. The micro‐conglomerates mark erosion surfaces. Microprobe and backscatter SEM analysis of the dolomite rhombs show an early diagenetic, complex‐zoned, idiomorphic overgrowth, with Mn‐rich zones, possibly formed by hot fluids related to cooling melt sheet in the crater. The pore spaces are filled with several generations of coelestite, barite, K‐feldpar, and sparry calcite. XRF core scanning analysis detected high Mn values in the crossbedded sediments but no anomalous enrichment of the siderophile elements Cr, Co, Fe, and Ni in the clay layer. Shocked quartz occurs in the crossbedded unit but is absent in the clay layer. The basal Paleocene marls are strongly dissolved and do not contain a basal Paleocene fauna. The presence of a hardground, the lack of siderophile elements, shocked quartz, or Ni‐rich spinels in the clay layer, and the absence of basal Paleocene biozones P0 and Pa all suggest that the top of the ejecta sequence and a significant part of the lower Paleocene is missing. Due to the high energy sedimentation infill, a hiatus at the top of the impactite is not unexpected, but there is nothing in the biostratigraphy, geochemistry, and petrology of the Yax‐1 core that can be used to argue against the synchroneity of the end‐Cretaceous mass‐extinctions and the Chicxulub crater.     

Prospects for astrometry with the Hubble Space Telescope

The Hubble Space Telescope (HST), a large optical telescope having an aperture of 2.4 meters and a length of 8.8 meters, is being developed by the National Aeronautics and Space Administration. This telescope will be placed into earth orbit by the space shuttle. Astrometric observations with the HST are made using a Fine Guidance Sensor which is capable of measuring the position of one object relative to another with an accuracy of ±0.002 arcseconds. The astrometric user of HST will be provided with an Astrometric Data Reduction Software package (ADRS). The variety of astrometric problems to be investigated with HST is discussed.     

Modes to replace transitional asymptotic ray fields in a vertically inhomogeneous earth model

Summary. Asymptotic ray theory (ART) fails in transition regions near critically reflected, bottom glancing or caustic-forming rays in a vertically inhomogeneous layered earth. These deficiencies are repaired here by replacing the transitional ray fields with guided modes plus truncation remainders. Exact ray-mode equivalences and their high-frequency asymptotic approximations are formulated, and their validity and efficiency are verified by numerical comparisons for SH motion in a two-layer earth model comprised of an inhomogeneous sediment above an homogeneous semi-infinite bedrock.     

Self-similar solutions for the blast wave problem in radiative gasdynamics,I

Similarity solutions, describing the flow of a perfect gas behind spherical shock waves, are investigated including the radiation heat flux. The shock is assumed to be propagating in a medium at rest. Shock radius varies exponentially with time and density is inversely proportional to fifth power of the shock radius immediately ahead of the shock front.     

Going underground: in search of Carboniferous coal forests

The development of coal forests during the Carboniferous is one of the best-known episodes in the history of life. Although often reconstructed as steamy tropical rainforests, these ancient ecosystems were a far cry from anything we might encounter in the Amazon today. Bizarre giant club-mosses, horsetails and tree ferns were the dominant plants, not flowering trees as in modern rainforests. At their height, coal forests stretched all the way from Kansas to Kazakhstan, spanning the entire breadth of tropical Pangaea. Most of what we know of their biodiversity and ecology has been quite literally mined out of the ground through two centuries of hard labour. Without coal mining, our knowledge would be greatly impoverished. Over the past few years, we've been exploring underground coal mines in the United States, where entire forested landscapes have been preserved intact over huge areas. Never before have geologists had the opportunity to walk out through mile upon mile of fossilized forest. In this feature article, we describe some of our recent explorations and attempt to shed new light on these old fossils.     

Physical parameters of near-Earth asteroid 1982 DV

Visual and infrared observations were made of Amor asteroid 1982 DV during its discovery apparition. Broadband visual and near-infrared photometry shows that it is an S-class asteroid. Narrowband spectrophotometry shows an absorption feature due to olivine or pyroxene or both centered at 0.93 μm. Applying a nonrotating thermal model to 10-μm photometry, the geometric albedo is calculated to be approximately 0.27. The geometric albedo for a slowly rotating, rocky surface was calculated for 1 night to be 0.15, consistent with S-class asteroid albedos. Thus, 1982 DV is either one of the most reflective S-class asteroids known, or a significant amount of bare rock is exposed on the asteroid's surface. For the nonrotating model, ellipsoidal dimensions for 1982 DV are 3.5 × 1.4 × 1.4 km.     

OTEC cold-water pipe research

Shelf-mounted Ocean Thermal Energy Conversion (OTEC) plants require installation of cold-water pipes (CWP) on slopes of40degto depths of 1000 m. In addition, tower platforms containing OTEC power systems may be located on lesser sloped terrain near shore and exposed to special environmental loading problems affecting foundation design. Shelf-mounted installations require careful attention to site selection and geotechnical considerations for foundation integrity on sloped surfaces. This paper primarily discusses research associated with cold-water pipe and foundation installations on steep slopes, although research continues on tower platforms located on the shelf. At least five nations are in various stages of development of OTEC systems for island applications. Each of their systems is either shelf mounted or land based and requires that a large diameter cold-water pipe be installed on a steep slope to provide cold water from 1000-m depths. In addition to the installation and deployment of the large cold-water pipe, the most significant problem is the design and installation of suitable foundations that will last for several decades. To date there is very little experience in the offshore industry for large installations on steep slopes. A major scale-model research project is underway on the slopes of the island of Hawaii. A section of pipe 2.4 m in diameter and 24 m long was installed using combination concrete foundations and joints. The pipe and foundations are fully instrumented to measure environmental loading forces due principally to currents and waves. Environmental measurements will also be taken in the test area. The measurement data will be used to validate available analytical models for subsequent use in aiding industry in providing more cost-effective designs for OTEC pipes and foundations.     

Three dimensional simulation of fluid flow in X‐ray CT images of porous media

A numerical scheme is developed in order to simulate fluid flow in three dimensional (3‐D) microstructures. The governing equations for steady incompressible flow are solved using the semi‐implicit method for pressure‐linked equations (SIMPLE) finite difference scheme within a non‐staggered grid system that represents the 3‐D microstructure. This system allows solving the governing equations using only one computational cell. The numerical scheme is verified through simulating fluid flow in idealized 3‐D microstructures with known closed form solutions for permeability. The numerical factors affecting the solution in terms of convergence and accuracy are also discussed. These factors include the resolution of the analysed microstructure and the truncation criterion. Fluid flow in 2‐D X‐ray computed tomography (CT) images of real porous media microstructure is also simulated using this numerical model. These real microstructures include field cores of asphalt mixes, laboratory linear kneading compactor (LKC) specimens, and laboratory Superpave gyratory compactor (SGC) specimens. The numerical results for the permeability of the real microstructures are compared with the results from closed form solutions. Copyright © 2004 John Wiley & Sons, Ltd.