Ocean bottom refraction seismograph (OBRS)

This paper describes a pop-up ocean bottom seismograph designed primarily for refraction surveys both on the continental shelf and in deep sea. Its development is the extension of our system based on seismic detectors located on the sea floor with radio transmission of seismic signals and used for seismic refraction studies on the continental shelf. The seismic detectors (vertical geophone or hydrophone and two orthogonally mounted horizontal geophones) are located outside of the pressure vessel on the main frame. Optionally, the seismic sensors may be decoupled from the main frame assembly. This decoupling is performed by a mobile arm positioning the separate three component sensor package on the sea floor.Contribution No. 455 of the Département Scientifique, Centre Océanologique de Bretagne.     

Estimation of the leeway drift of small craft

Small craft (<6·4 m) leeway is determined as a function of the wind speed in the range of 5–20 knots (3·6–10·3 m/sec). Leeway is calculated relative to the surface current by measurement of the separation distance of the small craft from a dyed patch of surface water at sea, using time-sequenced aerial photography. Leeway increases linearly with wind speed for small craft equipped with or without a sea anchor in the wind range studied. Leeway for small craft without sea anchor can be calculated from the equation U_L = 0.07 U_W + 0.04 where U_W is the wind speed at 2 m elevation. Leeway for small craft drifted off the be calculated from the equation U_LD = 0·05 U_W − 0·12. The small craft drifted off the downwind direction in about 80% of the experiments. The drift angle is variable and difficult to predict.     

Improved in situ gamma-ray transmission densitometer for marine sediments

The first-generation University of Illinois gamma-ray transmission densitometer, designed for the in situ measurement of sediment bulk density, was modified by incorporating in the detector probe (1) an Americium-241 alpha particle pulser and an anti-walk gain stabilization control to maintain better temperature stability and (2) a small power supply and a IC preamplifier to eliminate the need for a high-voltage coaxial cable between the detector and external signal conditioning electronics package. This second-generation Lehigh University system has been successfully deployed since 1971 in routine use from ships and submersibles in the Atlantic and Pacific Oceans and the Gulf of Mexico. Results are presented of system operations to (1) measure bulk density over the range of 1.2–1.8 Mg/m³ in the Hudson Canyon, (2) penetrate 1.9 m into the seafloor in the San Diego trough and, (3) be lowered to a water depth of 3.6 km in the Gulf of Mexico.     

The influence of the gulf’s geometry on seiche oscillations in an enclosed basin

The finite-elements technique is applied to study the effect of a basin’s geometry (bays, harbours) and location of the characteristics of seiche oscillations in the basin and in the gulf proper. An increase of the length of the bay is shown to contribute to the periods of natural oscillations and to cause their restructuring. Translated by Vladimir A. Puchkin.     

Transverse vibrations of a rectangular cantilever plate with thickness varying in a discontinuous fashion

A numerical solution is obtained for the title problem by means of the popular finite element method. An experimental investigation of the problem is also presented for plates of square planform. The agreement between theoretical and experimental values is very good in the case of the fundamental frequency, and reasonably good when the second and third normal modes of transverse vibration are considered. It is concluded that beneficial effects are obtained in the sense that one generates a lighter structural element with higher fundamental frequency of transverse vibration. Hence, dynamic stiffening is achieved.     

Experimental investigation of the combustive sound source

In this paper, we describe a unique low frequency underwater sound source called the combustive sound source (CSS). In this device, a combustible gas mixture is captured in a combustion chamber and ignited with a spark. The ensuing combustion produces expanding gases which in turn produce high intensity, low frequency acoustic pulses. With high-speed motion pictures of the CSS event, we relate the motion of the bubble to the acoustic waveform. We also compare the measured first bubble period in the CSS pressure signature with the predictions of the Rayleigh-Willis equation, including the dependence of the radiated acoustic waveform on the volume and depth of the bubble. Measurements of the first bubble period agree with Rayleigh-Willis theory in trend, but not in absolute value. In addition, we discuss the variation of the acoustic output with the fuel/oxygen mixture. Finally, several other factors that affect the acoustic output of CSS are discussed. These include the shape of the CSS combustion chamber, the type of oxidizer and fuel, and the ignition source     

Dynamic response of dolos armor units to drop test impact loads

Dolos concrete units have been used extensively throughout the world for the protection of shorelines and rubble structures. A three-dimensional finite element model is used to determine the states of dynamic stress in dolosse with varying dimensions and concrete properties. An analytical procedure is developed which accurately predicts the tensile stress in the shank and horizontal fluke of dolosse subject to drop test loading conditions Numerical examples are presented which illustrate the application of prediction and iso-stress equations.     

Geochemistry of suspended matter from the Baltic Sea 2. Results of bulk trace metal analysis by AAS

In 1984, on a transect covering the whole Baltic Sea and parts of the adjacent North Sea, 160 water samples were taken and analysed for their concentrations of particulate and dissolved metals. In addition, the suspended materials were investigated for their elemental bulk composition.The particulate fractions represented from about 5% (Cd, Cu and Ni) to 50% (Fe and Pb) of the total (particulate plus dissolved) concentrations. For some elements (Ba, Cd, Cu, Pb and Zn), the particulate matter from the surface microlayer was enriched with respect to those suspended materials taken from 0.2 m depth. This could reflect the atmospheric input of metal-rich aerosols. In anoxic deep waters, maximum contents of Zn (6400 μg g⁻¹), Cu (1330 μg g⁻¹) and Cd (12 μg g⁻¹) were observed in the particulate matter, indicating sulphidic forms. On the other hand, under oxic conditions the distribution coefficients (K_d) decreased with the water depth (Cd, Fe and Pb).Relative to global background levels, the particulate matter contained metal “excesses” amounting to more than 90% of the total contents (Cd, Mn, Pb and Zn). Automated electron probe X-ray microanalysis (EPXMA) revealed that the elemental composition of sediments is mainly governed by post-depositional processes of early diagenesis and is only weakly related to the composition of suspended matter in the overlying water body. For instance, in relation to surface mud sediments of the central Baltic net-sedimentation basins, Zn, Cd, Cu and Mn had 30–100% higher levels in the suspended materials. The general pattern of metal contents of particulate matter taken from 10 m depth on a transect between the Bothnian Bay and the North Sea were—possibly as a result of anthropogenic inputs—rather similar for Pb, Zn and Cu. For Fe and Mn, the distribution patterns along the transect were probably governed by the natural loading characteristics and by the biogeochemistry of those elements.     

Joint Soviet-Turkish expedition in the Black Sea

The hydrological and hydrochemical structures of the upper 300 m water column of the Black Sea in autumn 1988 have been studied. Regularities in the distribution of the physico-chemical characteristics in the zone of interaction between aerobic and anaerobic waters as well as the topography of the H₂S zone boundary and its connection with a certain density gradient have been found.Translated by Mikhail M. Trufanov.     

Digital preprocessing techniques for GLORIA II sonar images

Image processing techniques are discussed that correct distortions in GLORIA II side scan sonar imagery including water column offset, slant-range distortion, multiple returns, aspect ratio, speckle noise, striping, and cross-track power drop-off. The software operates within NASA's ELAS image processing system and is applied to the original 12-bit GLORIA II data. Procedures are discussed for generating large scale mosaics and three-dimensional overlays with sea floor bathymetry. The results are shown in four sonographs acquired off the southern coast of California.