Water transport from the North-east Irish Sea to western Scottish coastal waters: Further observations from time-trend matching of Sellafield radiocaesium

Radiocaesium isotopes, discharged into the North-east Irish Sea from the Sellafield (formerly Windscale) nuclear fuel reprocessing plant in Cumbria, have been employed as flow monitors to update and extend the record of coastal water movement from the Irish Sea to the Clyde Sea area and, further north, to Loch Etive. The temporal trends in radiocaesium levels have been used to determine the extent of water mixing en route and to define mean advection rates. Flow conditions from the Irish Sea have changed considerably since the mid-1970s, the residence time of northern Irish Sea waters being ～12 months during 1978–1980 inclusive. Average transport times of four and six months are estimated for the Sellafield to Clyde and Sellafield to Etive transects respectively. Sellafield ¹³⁷Cs levels in seawater were diluted by factors of 27 and 50 respectively during current movement to the Clyde and Etive areas. The decrease in salinity-corrected ¹³⁷Cs concentrations between the Clyde and Etive suggests that dilution by Atlantic water occurs, the latter mainly entering the Firth of Lorne from the west. The majority (～94%) of the radiocaesium supply to Loch Etive enters the Firth of Lorne via the portion of the coastal current circulating west of Islay, only ～6% arriving via the Sound of Jura.     

Line broadening on HF ocean surface radar backscatter spectra

Experimental results from an array of moored current meters and an HF ocean surface radar support the idea that line broadening on the radar spectra is caused by the velocity distribution within the radar target cell. The experiment was done in the wake of a small island where the velocity variations were severe. An estimate is made of the line broadening which can be expected. In a turbulent flow with dissipation rate of the orderepsilon sim 10^{-10}m^{2}s^{-3}and target cell size 1 3000 m, the line broadening isDeltaf sim 10^{-3}Hz. This would be resolved with a radar time series ofsim 20min and indicates that the HF ocean surface radar technique has potential in the observation of surface velocity distributions.     

Growth, interaction and seismogenic potential of coupled active normal faults (Isernia Basin, central-southern Italy)

The inception and growth of the active Carpino-Le Piane Basin Fault System (CLPBFS; central-southern Apennines, Italy) was analysed with respect to the neighbouring Isernia and Surrounding (ISFS) and Boiano Basin (BBFS) extensional Fault Systems. ³⁹Ar–⁴⁰Ar dating showed that the BBFS was already active 649 ± 21 ka bp and that the ISFS was active at least 476 ±10 ka bp , whereas the activity of the CLPBFS started certainly later than 253 ± 22 ka bp , and very probably as recently as <28 ka bp . These ages, combined with structural data (geometry and kinematics of the fault systems), indicate that the inception and development of the CLPBFS could be strictly related to the stress changes caused by earthquakes occurring on the BBFS.     

Pb, Sr and Nd isotope study of two co-existing magmas in the Nízke Tatry Mountains, Western Carpathians (Slovakia)

Summary Two co-existing plutonic rocks (diorite and granodiorite) were studied from an intrusion of Variscan age in the Raztocna Valley – Nízke Tatry Mountains, Western Carpathians. Geochemical analyses of major and trace elements constrain a volcanic arc as emplacement environment and give the first hints of a mixture of two magmatic end-members: the so-called Prasivá granodiorite and the Raztocna diorite. The ⁸⁷Sr/⁸⁶Sr₍₀₎ ratios vary between 0.7075 and 0.7118, the ε Nd₍₀₎ values range from −1.4 to −5.0. Common Pb isotopes reveal a dominant crustal source with minor influences from a mantle and a lower crustal source. Modelling based on Sr and Nd isotope data and using three component mixing calculations indicates that mixing of 2/3 of upper mantle material with 1/3 upper crustal material can produce the isotopic composition of the Raztocna diorite. Very minor amounts of lower crust were incorporated in the diorite. For the Prasivá granodiorite, the mixing ratio of upper mantle and upper crust is similar, but a lower crustal reservoir contributed about 5–10% of the source material.     

The Early Pleistocene Praetiglian and Ludhamian pollen stages in the North Sea Basin and their relationship to the marine isotope record

In this paper, the currently accepted correlation of the Early Pleistocene Ludhamian stage of England with the Tiglian‐A sub‐stage of the Netherlands is challenged. Recent investigations of Early Pleistocene marine North Sea deposits from a borehole near Noordwijk (the Netherlands) yielded evidence from molluscs, dinoflagellate cysts and sporomorphs for an alternation of warm‐temperate and arctic intervals within the Praetiglian and Tiglian stages. Marine equivalents of the terrestrial‐based pollen sub‐stages Tiglian A and B have been recognised in the upper part of the sequence. A Praetiglian age can be assigned to the lower part of the sequence on the basis of mollusc analysis. Within the Praetiglian, an alternation of warm and cold phases has been recognised from both the dinoflagellate cyst and molluscan records. Three cold phases within the Praetiglian are tentatively correlated with marine isotope stages (MIS) 96–100. The molluscan assemblages provide evidence for climate forcing of the sea level: highest sea levels are reached in the warm‐temperate intervals. Within the Praetiglian, an interval with an acme zone of the dinoflagellate cyst Impagidinium multiplexum, is correlated with the Ludhamian and tentatively linked to MIS 97 and/or MIS 96. The cold molluscan assemblages from the Noordwijk borehole include an acme zone of Megayoldia thraciaeformis, the first and only occurrence of this North Pacific bivalve in the North Sea Basin. Copyright © 2006 John Wiley & Sons, Ltd.     

A simulation tool for high data-rate acoustic communication in ashallow-water, time-varying channel

The paper discusses the development of a simulation tool to model high data-rate acoustic communication in shallow water. The simulation tool is able to generate synthetic time series of signals received at a transducer array after transmission across a shallow-water communication channel. The simulation tool is suitable for testing advanced signal processing techniques for message recovery. A channel model has been developed based on the physical aspects of the acoustic channel. Special emphasis has been given to fluctuations of the signal transmission caused by time-varying multipath effects. At shorter ranges, the temporal variations are dominated by acoustic scattering from the moving sea surface. Therefore, the channel model produces a coherence function which may be interpreted as a time-varying reflection coefficient for the surface scattered acoustical path. A static, range-independent ray model identifies the significant multipaths, and the surface path is modulated with the time-varying reflection coefficient. The advantages and limitations of the channel model are discussed and assumptions necessary to overcome the limitations are emphasised. Based on the assumptions, an algorithm has been developed and implemented to model how a binary message will be modulated when transmitted by a transducer, is distorted in the channel and finally is received by a transducer array     

OSCR wave measurements-some preliminary results

OSCR is an HF radar system that has been developed for high spatial resolution coastal surface current measurement. This paper describes preliminary results that demonstrate that wave measurement can be successfully obtained from suitably processed OSCR data. Comparisons with data from a WAVEC directional buoy are presented and show encouraging agreement. Some of the limitations to the measurement process are discussed and indicate a maximum range of about 20 km. Surface current variability on short time scales presents the most serious obstacle to wave measurement. This appears to be more of a problem when the mean currents are large, in that in these circumstances the data fail initial quality control criteria. However, in lower mean currents, the effect is often still present and leads to errors in long wave measurement     

Application of an improved self-starter to geoacoustic inversion

The self-starter is improved using the operator of the split-step Pade solution. In addition to providing greater stability and being applicable closer to the source, the improved self-starter is an efficient forward model for geoacoustic inversion. It is necessary to solve only O(10) tridiagonal systems of equations to obtain the acoustic field on a vertical array located O(10) wavelengths from a source. This experimental configuration is effective for geoacoustic inverse problems involving unknown parameters deep in the ocean bottom. For problems involving depth-dependent acoustic parameters, the improved self-starter can be used to solve nonlinear inverse problems involving O(10) unknown sediment parameters in less than a minute on the current generation of workstations