Observations of the Ushant tidal front in September 2007

The Ushant tidal front is the dominant feature of the summer season hydrological structure of the Iroise Sea. It separates tidally mixed coastal waters from thermally stratified open Celtic Sea waters. This article reports on observations made in September 2007 during two short cruises that took place aboard R/V “Côtes de la Manche”, and gives a general account of the physical structure of the front along one cross-frontal transect. The data set comprises data from a 4 month ADCP mooring, short CTD/fluorescence/nutrients transects, Lagrangian drifter trajectories, and HF radar surface current measurements. One finding is that the surface and bottom fronts, being affected by different dynamical influences, are not necessarily coincident in the vertical. This entails that the opposite density gradients located above and below the thermocline depth do not necessarily compensate, and can each be associated with a significant surface geostrophic expression. A second finding is that mixing effects bear a very strong influence on the thermal structure of the warm-water intrusions associated with frontal cyclonic eddies of the kind described by Pingree [1978. Cyclonic eddies and cross-frontal mixing. Journal of the Marine Biological Association of the United Kingdom 58 (4), 955–963].     

Interaction of internal waves with a horizontally inhomogeneous density field area overlying a ridge

In the context of the general linear theory, we consider the propagation of an internal tide across a frontal zone overyling an oceanic ridge. For a uniformly stratified ocean, the solution was derived using Riemann's technique. The dependences of the generated internal wave amplitudes on the stratification parameters and bottom topography were determined. We have found that wave disturbances of high intensity inside and in the neighbourhood of the ridge may be concentrated in raytype areas. An increase of the horizontal density gradient in the frontal zone results in a perceptible deformation of these areas.Translated by Vladimir A. Puchkin.     

The stable aryl hydrocarbon receptor agonist potency of United Kingdom Continental Shelf (UKCS) offshore produced water effluents

The in vitro aryl hydrocarbon receptor (AhR) agonist potency of offshore produced water effluents, collected from the United Kingdom Continental Shelf, was determined using the dioxin responsive (DR)-chemically activated luciferase expression (CALUX) assay. Octadecylsilane (C18) solid phase extraction (SPE) extracts of produced water were exposed to DR-CALUX cells for 24 h in order to investigate the contribution in potency from compounds that are stable to metabolism by the CALUX cells during exposure. The stable AhR agonist potency determined over 24 h was highly variable and ranged from 1 to 430 ng TCDD TEQ_CALUX l⁻¹. These data reflect the highly variable composition of produced water discharges from different production fields. It is recommended that further work be performed to characterise the full range of stable dioxin like AhR agonists present in offshore produced water discharges using techniques such as bioassay-directed analysis.     

TRANSFORMATION OF THE LINE LENGTHS OF CARTOGRAPHIC MODELS IN ACCORDANCE WITH FUNCTIONAL UNITS

A paper devoted to the transformation of cartographic images based on nontraditional systems of scaling (travel time, transport effort, cost, etc.) describes the results of work to develop a more effective algorithm for such transformations, i.e., one which the authors claim provides for the more accurate determination of “transformed” line lengths than possible with earlier methods. Translated from: Izvestiya AN SSSR, seriya geograficheskaya, 1987, No. 4, pp. 105-111.     

Equation of state of Fe3+-bearing phase-X

We investigated the high-pressure behaviour of Fe³⁺-bearing hydrous phase-X, (K_1.307Na_0.015)(Mg_1.504Fe _0.373 ³⁺ Al_0.053Ti _0.004 ⁴⁺ )Si₂O₇H_0.36, up to 34?GPa at room temperature by synchrotron X-ray powder diffraction. The lattice parameters behave anisotropically, with the [001] direction stiffer than [100]. In the 10^?4 to 22?GPa pressure range, the axial bulk moduli are K _0a ?=?112(3) GPa and K′?=?4, and K _0c ?=?158(2) GPa and K′?=?4, and the anisotropy of the lattice parameters is β_0c :β_0a ?=?0.71:1. The cell volumes are fitted by a second-order Birch–Murnaghan equation of state giving a bulk modulus of K ₀?=?127(1) GPa and K′?=?4 in the same pressure range. After 22?GPa, a discontinuity in volume and lattice parameters can be recognized. Sample did not become amorphous up to 34?GPa. The coupled substitution K?+?Mg?=?[]?+?Fe³⁺ has only a limited influence on the bulk modulus and structural stability of phase-X.     

Research progress and prospect of snow avalanche disaster prevention and control北大核心CSCD

Snow avalanches are a major natural hazard in the cryosphere. It seriously threatens transportation corridors, energy transmission and communication lines, mining and touristic areas in the cold mountainous regions and often causes the destruction of infrastructure and human casualties, hindering the sustainable development of society and economy in mountainous areas. Under climate change and the expansion of human activities to alpine mountains, more population and infrastructure will expose to the risk of avalanches. In order to ensure the sustainable development in mountainous areas, the demand for the prevention and management of avalanche disasters is increasing. Based on the review of the main avalanche research progress in China since 1960 and the avalanche research results all over the world, this paper summarized the progress on the influencing factors and regional distribution of avalanche activities, avalanche formation and movement mechanism, avalanche monitoring and early warning, avalanche risk assessment and engineering prevention, as well as the frontier problems and scientific difficulties that need to be studied. In addition, the impact of climate change on avalanche activities and the interaction between human activities and avalanche activities are discussed. By looking forward to the future needs of avalanche disaster prevention and reduction, including the countermeasures, the research on avalanche in China is promoted. © 2022 by the Author(s).     

Pressure-temperature and evolution of fluid compositions of Al2SiO5-bearing rocks,Mica Creek,B.C., in light of fluid inclusion data and mineral equilibria

Metamorphosed pelitic rocks from Mica Creek, British Columbia contain sillimanite, kyanite with minor fibrolite and andalusite-bearing quartz pods. Mineral equilibria were used to infer peak P-T conditions and fluid compositions in equilibrium with the solid phases. Fluid inclusions in three schist samples appear to be good indicators of conditions affecting those rocks during and after peak metamorphic conditions. In samples from two localities, fluid inclusions from schist and quartz-rich segregations have densities appropriate to the peak metamorphic conditions. The observed compositions for these fluids (low salinity with 12 mole % dissolved CO₂) agree with calculated values of 0.84 to 0.85, based upon paragonite-quartz-albite-Al₂SiO₅ equilibria. The fluids unmixed as the schists were uplifted and cooled; fluid inclusions trapped during this stage outline a solvus in the CO₂-H₂O-NaCl system. A later influx of fluids containing CH₄ and N₂ accompanied formation of andalusite-bearing plagioclaserich segregations. The restricted association of andalusite-bearing pods and low density fluids suggest a localized but pervasive fluid influx during uplift. Preservation of high density fluid inclusions during uplift and erosion, coupled with evidence for unmixing of H₂O- and CO₂-rich fluids on the solvus, provide constraints on the P-T uplift path.     

Review of Lagrangian stochastic models for trajectories in the turbulent atmosphere

We review the theoretical basis for, and the advantages of, random flight models for the trajectories of tracer particles in turbulence. We then survey their application to calculate dispersion in the principal types of atmospheric turbulence (stratified, vertically-inhomogeneous, Gaussian or non-Gaussian turbulence in the surface layer and above), and show that they are especially suitable for some problems (e.g., quantifying ground emissions).     

Seismic observations at an overstep of the western North Anatolian Fault (Abant–Sapanca region, Turkey)

The course of the active North Anatolian Fault system from Lake Abant to Lake Sapanca was traced by its high micro-earthquake activity. If approaching from the east this section includes a broad south to north overstep (fault offset) of the main fault. Local seismicity has been recorded in this area by a semi-permanent network of 8 stations since 1985 within the frame of the Turkish–German Joint Project for Earthquake Research. The effect of the overstep and its complex fracture kinematics are reflected by the seismicity distribution, the variations of composite fault-plane solutions, and by the spatial coda-Q distribution. Areas of different stress orientation can be distinguished and assigned to different groups of faults. The stresses and the tectonic pattern only in part correspond to a simple model of an extensional overstep and its correlative pull-apart basin. Other types of deformation involved are characterized by normal faulting on faults parallel to the general course of the main strike-slip fault and by synthetic strike-slip faults oriented similar to Riedel shears. Shear deformation by this fault group widely distributed in an area north and east of the main fault line may play an important role in the evolution of the overstep. The development of a pull-apart basin is inhibited along the eastern half of the overstep and compatibility of both strands of the main fault (Bolu–Lake Abant and Lake Sapanca– Izmit–Marmara Sea) seems to be achieved with the aid of the fault systems mentioned. The extension of the missing part of the pull-apart basin seems to be displaced to positions remote from the Lake Abant–Lake Sapanca main fault line, i.e. to the Akyaz?–Düzce basin tract. Highest Q-values (lowest attenuation of seismic waves) were found in the zone of highest seismicity north and west of the overstep which is the zone of strongest horizontal tension. If high coda-Q is an indicator for strong scattering of seismic waves it might be related to extensional opening of fractures.     

Cobalt zoning in microscopic pyrite from Kamoto,Republic of the Congo (Kinshasa)

The Kamoto deposit consists of two stratiform orebodies separated by a barren sedimentary unit. It is a copper and cobalt deposit, the main features of which are summarized in the first part of the paper. Above the upper orebody, dolostone beds are found, where pyrite is the only sulfide mineral. This pyrite was investigated with the help of a microprobe: all idiomorphic grains were found to be surrounded by a well-defined rim, where the cobalt content reaches 4%; framboidal grains were also found to be heterogeneous with respect to cobalt. The distribution of nickel and copper is described. These observations afford one more evidence that post-depositional events played an important role in the Mine Series of Katanga, especially with regard to heavy metals geochemistry.

---

Resume Le gisement de Kamoto est constitué de deux corps minéralisés stratiformes séparés par une unité sédimentaire stérile. C'est un gisement de cuivre et de cobalt dont les principales caractéristiques sont brièvement résumées. Audessus du corps minéralisé supérieur, on trouve des couches de dolomie, où la pyrite est le seul sulfure présent. Cette pyrite a été étudiée à l'aide d'une microsonde: tous les grains idiomorphes y sont entourés d'une bordure bien nette, où la teneur en cobalt atteint 4%; les grains d'apparence framboïdale sont également hétérogènes au point de vue de leur teneur en cobalt. La distribution du nickel et du cuivre est décrite. Ces observations apportent um témoignage supplémentaire de l'importance des événements postérieurs au dépôt dans la «Série des Mines» katangaise, tout spécialement en ce qui concerne la géochimie des métaux lourds. Elles démontrent que le «système» constitué par la roche sédimentaire est resté ouvert pendant un certain temps après la sédimentation.