Differences in the emission line spectrum at maximum and minimum of the nuclear brightness of the Seyfert galaxy NGC 7469

We have compiled data on relative intensties, fluxes and profiles of emission lines of the NGC 7469 nuclear spectrum observed in the optical region by many authors during 1966–1986. The aim of our investigation is to reveal differences in the characteristics of the emission lines in maxima and minima of the nuclear brightness. The distinction was revealed for relative intensities, fluxes and profiles. During the extreme maxima profiles ofH ,H andH lines, colour indices of the nucleus and its high level of accretion rate resemble those of QSOs. On the other hand, during the deep minimum 1989 the nucleus had the properties of a Sy2 type. There is a relation between variable fluxes ofH and [OIII] 5007 Å lines which is different for the minima and maxima of the nuclear brightness. The fluxes of the [OIII] 5007 Å line during the minima of the nuclear brightness are systematically higher than those in maxima. The above mentioned peculiarities of the emission lines in the NGC 7469 nucleus can be understood in terms of the increase of electron temperature, electron density and velocities of the nuclear gas from minimum to maximum.     

Propagation of solar cosmic rays: Diffusion versus focused diffusion

This paper is designed to bring to the attention the fact that the effect of focusing of solar energetic particles is always essential as compared with scattering, no matter how small the value of the mean free path may be. That is why, an ordinary (focusing-free) diffusion approach can not be applied to the solar cosmic ray transport. In the case of high-energy solar particles, the focused diffusion is demonstrated to lead to a power law decay of energetic particle intensity much like an ordinary diffusion. However, the power law index of the decay is renormalized by the focusing.     

Surface renewal analysis for sensible and latent heat flux density

High frequency temperature measurements were recorded at five heights and surface renewal (SR) analysis was used to estimate sensible heat flux density (H) over 0.1 m tall grass. Traces of the temperature data showed ramp-like structures, and the mean amplitude and duration of these ramps were used to calculate H using structure functions. Data were compared with H values measured with a sonic anemometer. Latent heat flux density (E) was calculated using an energy balance and the results were compared with E computed from the sonic anemometer data. SR analysis provided good estimates of H for data recorded at all heights but the canopy top and at the highest measurement level, which was above the fully adjusted boundary layer.     

Conditional statistics of vertical heat fluxes in local advection conditions

Turbulent fluctuations have been investigated in the internal boundary layer (IBL) which forms after a dry-to-wet surface transition. The IBL is defined as that part of the atmospheric surface layer where the influence of the downstream surface is noticeable. The results of the application of three different quadrant analysis techniques are presented. The three techniques, in increasing order of the amount of information supplied, provide:

1. the diurnal variation of quadrant contribution (C _i), number fraction (T _i) and conditional average (% MathType!MTEF!2!1!+-% feaafeart1ev1aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn% hiov2DGi1BTfMBaeXafv3ySLgzGmvETj2BSbqefm0B1jxALjhiov2D% aebbfv3ySLgzGueE0jxyaibaiiYdd9qrFfea0dXdf9vqai-hEir8Ve% ea0de9qq-hbrpepeea0db9q8as0-LqLs-Jirpepeea0-as0Fb9pgea% 0lrP0xe9Fve9Fve9qapdbaqaaeGacaGaaiaabeqaamaabaabcaGcba% GaeyykJeUabm4DayaafaGabm4CayaafaGaeyOkJe-aaSbaaSqaaiaa% dMgaaeqaaaaa!4215!\[\langle w's'\rangle _i \], with s = T or q) of vertical sensible and latent heat fluxes,
2. the quadrant contribution and number of samples of different sizes depending on the relative magnitude of each sample, and
3. the distribution of the nondimensional probability density function.

The results show that in the IBL the vertical flux of sensible heat is maintained by (i) a small fraction of large samples with warm air carried upwards, and (ii) a larger fraction of small samples with cool air carried downwards. Both processes are almost equal in importance. In the morning and near the top of the IBL negative temperature fluctuations are limited by the near-uniform temperature conditions upstream and above the IBL. This limitation reduces, at that location, the conditional average of the sinking motions of cool air. Closer to the wet surface the negative temperature fluctuations are less susceptible to the above mentioned limitation. As a consequence contributions from all four quadrants are almost equal leading to a very small vertical heat flux. In the presence of a temperature inversion over both the upstream and the downstream terrain, shear-generated turbulence appears to be the cause of the relative abundance of sinking motions of warm air and rising motions of cool air, leading to a reversal of the sensible heat flux. The latent heat flux is positive (i.e. directed away from the surface) at all times and is maintained in almost equal amount by (i) a small number of large magnitude samples with moist air carried upwards, and (ii) small magnitude samples with sinking motions of dry air. These sinking motions of dry air are far more numerous, especially in the morning, but their conditional average is very small. The abundance of sinking motions of dry air is attributed to the fact that over the downstream terrain evaporation is greatly enhanced, leading to a skewed w′q′ signal. This skewness is clearly visible in the w′q′-probability density distribution of the morning runs. In the evening the asymmetry between these two different contributions disappears. This is because evaporation is greatly reduced and large positive humidity fluctuations no longer occur.     

A nonlinear tensor field and the second metric tensor

In our preceding paper {see [L. Sh. Grigorian and S. Gottlöber, Astrofizika (in press)]} we investigated a self-gravitating system consisting of a scalar field and a linear tensor field _ik= _ki with minimal coupling and with allowance for the action of vacuum polarization effects. In the present paper we investigate the case of a nonlinear tensor field _ik. The action S ⁽⁾ of the field _ik is determined by the difference R_ik — _ik, where R_ik is the space-time Ricci tensor and Rik is the analogous quantity constructed using the metric _ik=g_ik+_ik induced by _ik ( is a free parameter). Here S ⁽⁾ coincides with the previously known expression for the action of a linear field _ik. Equations of motion are derived for _ik in curved space-time. The energy-momentum metric tensor, determining the contribution of _ik to the gravitational field equations, is calculated.Translated from Astrofizika, Vol. 39, No. 1, pp. 135–144, January-March, 1996.     

Neutron stars in the multidimensional einstein theory of gravitation

The radius, mass, total number of baryons, and other parameters of static, spherically symmetric, superdense stars are calculated. A model with one Ricci-flat inner space of arbitrary dimensionality and the approximation p₁=?0.5ε + ap for additional components of the energy — momentum tensor are used (ε and ρ are the total energy density and the pressure of the stellar matter and a is a fitting parameter). In the case of white dwarfs, the results of the multidimensional theory do not depend on the dimensionality D of space-time for ?10 ? a ? 10 and coincide with the analogous data of the general theory of relativity (GTR). For neutron stars there is a dependence on D and a. For D>4, in particular, the greatest mass M_max of a neutron star as a function of a has a maximum at 3<a(D) ? 4, which exceeds the greatest mass M _max ⁰ =2.14 M_⊙ in the GTR. A comparison of theoretical results with observational data determines the allowable values of a. Data for PSR 1913 + 16 lead to 0.2 ≤ a ≤ 9.2 in the case of D=26, while the results of [P. C. Joss and S. A. Rappaport, Annu. Rev. Astron. Astrophys.,22, 537 (1984)] lead to the stricter limits 1 ≤ a ≤ 7.4.     

Singular points of the polarization tensor

The problem to compute the magnetic field above the chromosphere using data of the vector = B _t/Bt that gives the projected field direction can be solved with different approximations. The field of direction vectors is, however, not the only field accessible to observations. The Stokes parameters, which are components of the radiation tensor, can be measured at each point of the image plane. The directions of the eigenvectors of the radiation tensor define two mutually orthogonal systems of integral curves in the image plane. These families of curves have singular points, which are generally of different type than those of the vector field. When the morphology of H chromospheric fibrils are used to infer the topology of the magnetic field, a similar problem is met, suggesting that singular points should also be present there.     

Sediment oxygen profiles in a super-oxygenated antarctic lake

Perennially ice-covered lakes are found in the McMurdo Dry Valleys of southern Victoria Land, Antarctica. In contrast to temperate lakes that have diurnal photic periods, antarctic (and arctic) lakes have a yearly photic period. An unusual feature of the antarctic lakes is the occurrence of O2 at supersaturated levels in certain portions of the water column. Here we report the first sediment O2 profiles obtained using a microelectrode from a perennially ice-covered antarctic lake. Sediment cores collected in January and October 1987 from Lake Hoare in Taylor Valley show oxygenation down to 15, and in some cases, 25 cm. The oxygenation of sediments several centimeters below the sediment-water interface is atypical for lake sediments and may be characteristic of perennially ice-covered lakes. There is a significant difference between the observed January and October sediment O2 profiles. Several explanations may account for the difference, including seasonality. A time-dependent model is presented which tests the feasibility of a seasonal cycle resulting from the long photoperiod and benthic primary production in sediments overlain by a highly oxygenated water column.     

Radiocarbon redating of contaminated samples from a tropical volcano: the Mansion ‘Series’ of St Kitts,West Indies

Heavy rainfall and dense vegetation on tropical volcanoes produce abundant carbonized wood in pyroclastic deposits, in addition to easy contamination of this wood by root systems and soluble humic material. Because the physical nature of the charcoal varies, some samples are more prone to contamination. Two independent studies of the same volcano, Mt Liamuiga on St Kitts in the Lesser Antilles, sometimes using samples from the same carbonized tree, yielded a systematic difference in radiocarbon ages. An exchange of samples and a re-investigation of three physically distinct types of charcoal yielded the following results. Rare, hard, dense charcoal, lacking contamination, which had yielded a spurious age of 2860 years bp, was redated at 1845±58 years bp. Common soft, friable charcoal with good cellular structure proved to be susceptible to contamination. A field decontamination technique utilized by one group seems significant as it yields older ages than when only routine laboratory pre-treatment was used, indicating that the latter technique only partly removes the dried and hard residue produced by the decomposition of modern plant rootlets. A previous date of 24870 years bp obtained from powdery charcoal in a horizon beneath the Mansion Series contradicted ages older than 41000 years bp from common friable charcoal in the lower Mansion Series. The soft powdery charcoal was re-investigated using a sample collected a few centimeters from the original, although field decontamination of this sample was not possible, more extensive laboratory treatment yielded an age of ca. 43000 years bp, again proving that routine laboratory pretreatments are inadequate. A revised geochronology for the Mansion Series is described and a cautionary discussion is presented for the benefit of investigators using radiocarbon ages to date volcanic deposits.     

Compressibility of titanosilicate melts

The effect of composition on the relaxed adiabatic bulk modulus (K₀) of a range of alkali- and alkaline earth-titanosilicate [X ₂ ^n/n+ TiSiO₅ (X=Li, Na, K, Rb, Cs, Ca, Sr, Ba)] melts has been investigated. The relaxed bulk moduli of these melts have been measured using ultrasonic interferometric methods at frequencies of 3, 5 and 7 MHz in the temperature range of 950 to 1600°C (0.02 Pa s < _s < 5 Pa s). The bulk moduli of these melts decrease with increasing cation size from Li to Cs and Ca to Ba, and with increasing temperature. The bulk moduli of the Li-, Na-, Ca- and Ba-bearing metasilicate melts decrease with the addition of both TiO₂ and SiO₂ whereas those of the K-, Rb- and Cs-bearing melts increase. Linear fits to the bulk modulus versus volume fraction of TiO₂ do not converge to a common compressibility of the TiO₂ component, indicating that the structural role of TiO₂ in these melts is dependent on the identity of the cation. This proposition is supported by a number of other property data for these and related melt compositions including heat capacity and density, as well as structural inferences from X-ray absorption spectroscopy (XANES). The compositional dependence of the compressibility of the TiO₂ component in these melts explains the difficulty incurred in previous attempts to incorporate TiO₂ in calculation schemes for melt compressibility. The empirical relationship KV^-4/3 for isostructural materials has been used to evaluate the compressibility-related structural changes occurring in these melts. The alkali metasilicate and disilicate melts are isostructural, independent of the cation. The addition of Ti to the metasilicate composition (i.e. X₂TiSiO₅), however, results in a series of melts which are not isostructural. The alkaline-earth metasilicate and disilicate compositions are not isostructural, but the addition of Ti to the metasilicate compositions (i.e. XTiSiO₅) would appear, on the basis of modulus-volume systematics, to result in the melts becoming isostructural with respect to compressibility.