Numerical modeling assessment of three-gate structures for capturing contaminated groundwater

This modeling study evaluated the capability of alternative funnel-and-gate structures with three gates for capturing contaminated groundwater in a hypothetical unconfined aquifer. Simulated interceptor structures were linear and 45 m wide, consisting of three gates and two funnels (walls). One gate occupied the center and two gates occupied the ends of the interceptor structures. The structures, positioned perpendicular to regional groundwater flow, traversed the entire thickness of the aquifer. A total of four structures were evaluated (numbers designate widths of end, center, and end gates, respectively, in meters): 3-3-3, 2-5-2, 1-7-1, and 4-1-4. Particle tracking and zonal water budgets identified shapes of capture zones and discharge patterns for each interceptor structure. A mass transport model, accounting for advection and hydrodynamic dispersion, tested the capability of each structure for capturing a contaminant plume. Results suggest that: time-dependent capture zones underestimate the amount of time to capture a contaminant plume, wide center gates facilitate plume capture, and wide end gates facilitate lateral containment of contaminants. Of the structures simulated, the 2-5-2 configuration was relatively efficient at processing and containing the simulated contaminant plume.     

Regional distribution pattern of groundwater heavy metals resulting from agricultural activities

Contaminations of groundwater by heavy metals due to agricultural activities are growing recently. The objective of this study was to evaluate and map regional patterns of heavy metals (Cd, Zn and Cu) in groundwater on a plain with high agricultural activities. The study was conducted to investigate the concentration of heavy metals and distribution in groundwater in regions of Shush Danial and Andimeshk aquifers in the southern part of Iran. Presently, groundwater is the only appropriate and widely used source of drinking water for rural and urban communities in this region. The region covers an area of 1,100 km² between the Dez and Karkhe rivers, which lead to the Persian Gulf. For this study, the region was divided into four sub-regions A, B, C and D. Additionally, 168 groundwater samples were collected from 42 water wells during the earlier months of 2004. The flame atomic absorption spectrometry (AAS-Flame) was used to measure the concentration of heavy metals in water samples and the Surfer software was used for determination of the contour map of metal distribution. The results demonstrated that in all of the samples, Cd and Zn concentrations were below the EPA MCLG and EPA secondary standard, respectively. However, the Cu contents of 4.8 % of all samples were higher than EPA MCL. It is also indicated that the concentrations of metals were more pronounced at the southern part of the studied region than at the others. The analysis of fertilizers applied for agricultural activities at this region also indicated that a great majority of the above-mentioned heavy metals were discharged into the environment. Absence of confining layers, proximity to land surface, excess agricultural activities in the southern part and groundwater flow direction that is generally from the north to the southern parts in this area make the southern region of the Shush plain especially vulnerable to pollution by heavy metals than by other contaminants.     

Groundwater recharge of carbonate aquifers of the Silesian-Cracow Triassic (southern Poland) under human impact

A Triassic carbonate unit has been intensively drained by zinc and lead ore mines and numerous borehole fields since the nineteenth century. Its groundwater recharge has increased due to: pumping of water from boreholes, mining activity, and urbanization. An approach to determine the amounts of the recharge at a variety of spatial scales is presented in the paper. Different methods were used to identify and quantify recharge components on a regional and local scale: mathematical modelling was performed for four aquifers included in an aquifer system, an analytical estimation based on the assumption that an average recharge is equal to the average discharge of the hydrogeological system—for six man-made drainage centres, and the method of water level fluctuation (WLF) was applied in one observation borehole. Results of modelling have been supplemented by observation of environmental tracers (δ¹⁸O, δ²H, ³H), noble gases temperatures, and ⁴He_exc in groundwater. The regional aquifer’s current recharge according to estimations performed by means of modelling varies from 39 to 101 mm/year on average. Depending on the aquifer site the average precipitation ranges from 779 to 864 mm/year. In the confined part of the aquifer average recharge ranges from 26 to 61 mm/year. Within outcrops average recharge varies from 96 to 370 mm/year. Current recharge estimated by the analytical method for man-made drainage centres varies from 158 up to 440 mm/year. High values are caused by different recharge sources like precipitation, induced leakage from shallow aquifers, and water losses from streams, water mains and sewer systems. Pumping of water, mining and municipal activities constitute additional factors accounting for the intensified recharge.     

Mapping susceptibility of rainfall-triggered shallow landslides using a probabilistic approach

To prepare a landslide susceptibility map is essential to identify hazardous regions, construct appropriate mitigation facilities, and plan emergency measures for a region prone to landslides triggered by rainfall. The conventional mapping methods require much information about past landslides records and contributing terrace and rainfall. They also rely heavily on the quantity and quality of accessible information and subjectively of the map builder. This paper contributes to a systematic and quantitative assessment of mapping landslide hazards over a region. Geographical Information System is implemented to retrieve relevant parameters from data layers, including the spatial distribution of transient fluid pressures, which is estimated using the TRIGRS program. The factor of safety of each pixel in the study region is calculated analytically. Monte Carlo simulation of random variables is conducted to process the estimation of fluid pressure and factor of safety for multiple times. The failure probability of each pixel is thus estimated. These procedures of mapping landslide potential are demonstrated in a case history. The analysis results reveal a positive correlation between landslide probability and accumulated rainfall. This approach gives simulation results compared to field records. The location and size of actual landslide are well predicted. An explanation for some of the inconsistencies is also provided to emphasize the importance of site information on the accuracy of mapping results.     

Experimental study on the deterioration and natural remediation of the Ariake Sea tidal mud caused by the sea laver treatment acid practice and the upward seepage of pore water liquid

This study presents a laboratory study of the following two aspects: (1) the influence of sea laver treatment acid on the geoenvironmental properties of Ariake Sea tidal mud, and (2) the natural remediation effect on the sea laver treatment acid contaminated Ariake Sea tidal mud caused by the upward seepage of pore water liquid in the mud. Firstly, the mechanisms of the transport of sea laver treatment acid in the Ariake Sea tidal mud and the generation mechanisms of the upward seepage flow in the Ariake Sea tidal mud are discussed. Secondly, a series of one-dimensional laboratory infiltration tests were carried out to investigate the deterioration of the Ariake Sea tidal mud caused by the sea laver acid treatment practice. Test results reveal that the acid treatment practice caused considerable change in the geochemical properties of the mud in terms of increase in sulfide content and decrease in pH value. After the treatment by the sea laver treatment acid, the sulfide content of the mud even exceeded the safe limit value for the benthos, which represents undesirable living condition for benthos. Thirdly, series of laboratory fresh seawater infiltration tests for the deteriorated Iida site mud were conducted to illustrate this natural remediation efficiency. It is found that with the infiltration of the fresh seawater, the sulfide content of the Iida site mud was considerably reduced and pH value increased to an acceptable range for benthos living in the tidal flat mud. With the increase in the infiltration time and the hydraulic gradient, the remediation efficiency could be increased.     

Spatial data for landslide susceptibility, hazard, and vulnerability assessment: An overview

The aim of this paper is to discuss a number of issues related to the use of spatial information for landslide susceptibility, hazard, and vulnerability assessment. The paper centers around the types of spatial data needed for each of these components, and the methods for obtaining them. A number of concepts are illustrated using an extensive spatial data set for the city of Tegucigalpa in Honduras. The paper intends to supplement the information given in the “Guidelines for Landslide Susceptibility, Hazard and Risk Zoning for Land Use Planning” by the Joint ISSMGE, ISRM and IAEG Technical Committee on Landslides and Engineered Slopes (JTC-1). The last few decades have shown a very fast development in the application of digital tools such as Geographic Information Systems, Digital Image Processing, Digital Photogrammetry and Global Positioning Systems. Landslide inventory databases are becoming available to more countries and several are now also available through the internet. A comprehensive landslide inventory is a must in order to be able to quantify both landslide hazard and risk. With respect to the environmental factors used in landslide hazard assessment, there is a tendency to utilize those data layers that are easily obtainable from Digital Elevation Models and satellite imagery, whereas less emphasis is on those data layers that require detailed field investigations. A review is given of the trends in collecting spatial information on environmental factors with a focus on Digital Elevation Models, geology and soils, geomorphology, land use and elements at risk.     

A GPR study of subsidence-creep-fault processes in Morelia, Michoacán, Mexico

In 1983, inhabitants of the City of Morelia, Michoacán, Mexico, began to observe a series of differential settlements causing damages to constructions along linear trends parallel to a system of regional faults. The same phenomenon occurs in others cities of the Mexican Volcanic Belt (MVB), such as Celaya, Aguascalientes, and Querétaro, and is linked to a structurally controlled subsidence, caused by groundwater withdrawal, and the presence of geological faults. We define this subsidence type as Subsidence-Creep-Fault Processes (SCFP), based on the necessary elements for their generation, and we studied them through geophysical and geotechnical techniques. In Morelia, the geophysical investigations have been carried out using ground-penetrating radar (GPR). GPR profiles, perpendicular to the axis of the surface fault generated by the SCFP were carried out. The common-offset single-fold profiling was used, with a central frequency of 50 MHz. In all cases it has been possible to visualize a fault plane dividing two blocks, the presence of synthetic and antithetic faults, influence zones from 20 m to 40 m, and a maximum “net throw” of 4 m. Exploration trenches followed the same direction of the profiles obtained with GPR (perpendicular to the axis of the surface fault). These trenches exposed a fault plane dividing two blocks with different lithology, generating a maximum “net throw” of 4.40 m; as well they help in the determination of influence zones that varied from 14 m to 40 m.     

A new method of estimating the ratio between in situ rock stresses and tectonics based on empirical and probabilistic analyses

This paper describes a new procedure for assessing the ratio between in situ stresses in rock masses by means of K (K = σ_H / σ_v, being σ_H and σ_v principal stress) and tectonics for purposes of engineering geology and rock mechanics. The method combines the use of the logic decision tree and the empirical relationship between the Tectonic Stress Index, TSI, and a series of K in situ values obtained from an extensive database. The decision tree considers geological and geophysical factors affecting stress magnitudes both on the regional and local scale. The TSI index is defined by geological and geomechanical parameters. The method proposed provides an assessment of the magnitude of horizontal stresses of tectonic origin. Results for several regions of Europe are presented and the possible applications of the procedure are discussed.     

Design of shallow foundations under tensile loading for transmission line towers: An overview

Tensioned foundations are common in civil engineering applications such as transmission towers, harbors, offshore structures, basement slabs under pressure, industrial equipment, etc. Procedures for the design of tensioned foundations are discussed in this paper, including specific recommendations for more common transmission tower foundations. Starting from a distinction between shallow and deep modes of failure, the paper presents the most common failure mechanisms for shallow failure in tension, including procedures for calculation of foundation tensile capacity under vertical and inclined loading. Emphasis is given to the influence of the strength of the compacted backfill compared to the strength of the natural soil, including presentation of results of full-scale loading tests.