Modelling water infiltration in cracked paddy field soil

Periodic paddy field flooding is a major source of groundwater recharge. Many paddy fields thus are used as groundwater recharge ponds after harvesting the first crop of the summer. Following rice harvesting, paddy field surfaces may crack into fissures as a result of drainage and exposure to sunlight. Field observation indicates that applying precipitation to the paddy field can increase the rate of infiltration. To quantitatively evaluate the amount of infiltration in a cracked paddy field, this study sets up a simple soil crack model to simulate the field infiltration process. A three‐dimensional groundwater model FEMWATER is adopted to simulate water movement in the paddy field subjected to various crack conditions. Using the field and laboratory data of irrigation water requirements, soil physical properties, hydraulic conductivities and soil profiles obtained from Ten‐Chung, FEMWATER simulates the water movement in the dry cracked paddy. Simulation results show that if the cracks develop extensively and penetrate the ploughed soil, the infiltration rate may increase significantly. The infiltration fluxes of crack with depths of 80, 60 and 27·5 cm are 18·77, 14·50 and 8·06 times higher than that of 20 cm, respectively. The simulation results of cracks with 80 cm depth correlated closely with field observations. The results of the study elucidate the processes of unsaturated water movement in a dry cracked paddy field. Copyright © 2004 John Wiley & Sons, Ltd.     

Geostatistical analysis and conditional simulation for estimating the spatial variability of hydraulic conductivity in the Choushui River alluvial fan,Taiwan

This work evaluated the spatial variability and distribution of heterogeneous hydraulic conductivity (K) in the Choushui River alluvial fan in Taiwan, using ordinary kriging (OK) and mean and individual sequential Gaussian simulations (SGS). A baseline flow model constructed by upscaling parameters was inversely calibrated to determine the pumping and recharge rates. Simulated heads using different K realizations were then compared with historically measured heads. A global/local simulated error between simulated and measured heads was analysed to assess the different spatial variabilities of various estimated K distributions. The results of a MODFLOW simulation indicate that the OK realization had the smallest sum of absolute mean simulation errors (SAMSE) and the SGS realizations preserved the spatial variability of the measured K fields. Moreover, the SAMSE increases as the spatial variability of the K field increases. The OK realization yields small local simulation errors in the measured K field of moderate magnitude, whereas the SGS realizations have small local simulation errors in the measured K fields, with high and low values. The OK realization of K can be applied to perform a deterministic inverse calibration. The mean SGS method is suggested for constructing a K field when the application focuses on extreme values of estimated parameters and small calibration errors, such as in a simulation of contaminant transport in heterogeneous aquifers. The individual SGS realization is useful in stochastically assessing the spatial uncertainty of highly heterogeneous aquifers. Copyright © 2004 John Wiley & Sons, Ltd.     

Statistical approach to determine the salinized ground water flow path and hydrogeochemical features around the underground LPG cavern,Korea

The ground water flow path of the coastal area in the Yellow Sea, Korea, was interpreted using both the cross‐correlation analysis of hydraulic properties and the principal component analysis (PCA) of ground water chemistry. Data was obtained from observation wells in the underground liquefied petroleum gas (LPG) cavern constructed in the coastal area of Pyeongtaek. Cross‐correlation results showed that the operating pressure became more influenced on artificial factors for the variation of the groundwater level of the study area (45–66% of correlation coefficient) even though its affecting area was limited to the region with fractures or faults, and also showed that the delay time from the variation of operating pressure to the fluctuation of ground water level were relatively long periods (28–31 days). Three hydrogeochemical events (encrusted cement dissolution, host rock dissolution, and seawater intrusion), which were dominantly influenced on ground water quality, could be induced from the result of PCA. Quantitative evaluation for these events using the mixed equation with principal component scores suggest that the dissolution of encrusted cement materials was the predominant factor (39·0% of the total mixed proportion) to change the chemical composition of the seepage water during the ground water flow from the observation wells to the cavern. Integration of the statistical results also imply that ground water flow and hydrogeochemistry were predominantly affected by artificial factors such as cavern operation pressure and dissolution of encrusted cement materials, which were interdependent factors on the observation wells with high cross‐correlation coefficients and pH. Copyright © 2007 John Wiley & Sons, Ltd.     

Incorporation of GPS and IP camera for people tracking

Using the global positioning system (GPS) for people tracking continues to get easier. A person can transmit his/her GPS location from the carried mobile devices. The location is usually displayed as a dot on a digital map. However, a dot on the map is insufficient to reveal the person’s actual situation, e.g., an accident being happening. If the GPS is incorporated with an IP (Internet Protocol) camera, the camera image is critical in revealing the person’s actual situation and to improve the above-mentioned insufficient information. We present an approach to facilitate such incorporation. The approach consists of three phases: locating, tracking and monitoring collision. When the GPS coordinates of a person are within the field-of-view (FOV) of a camera, the approach enters the locating phase. The GPS coordinates are transformed to specify a candidate area (CA) in the image. The update of GPS coordinates is used to filter those moving objects within the CA until only one remains. After the person is located, he is being tracked using the shortest Euclidean distance method to find the most likely object in the next image. If the person collides with other objects while being tracked, a template matching technique, the sum of absolute difference (SAD), is used to locate the person in the collision area. The tracking is done after the person leaves the FOV of the camera. In the experimental studies, the tracking of one to three persons was performed using the implemented prototype. The average locating error of the tracking phase is only 5 pixels. The highest and average tracking success rates are 95.9% and 90.6%, respectively. These results show that the proposed approach is accurate and feasible for people tracking by incorporating GPS and IP cameras.     

Past,present and future vegetation-cloud feedbacks in the Amazon Basin

To begin exploring the underlying mechanisms that couple vegetation to cloud formation processes, we derive the lifting condensation level (LCL) to estimate cumulus cloud base height. Using a fully coupled land–ocean–atmosphere general circulation model (HadCM3LC), we investigate Amazonian forest feedbacks on cloud formation over three geological periods; modern-day (a.d. 1970–1990), the last glacial maximum (LGM; 21 kya), and under a future climate scenario (IS92a; a.d. 2070–2090). Results indicate that for both past and future climate scenarios, LCL is higher relative to modern-day. Statistical analyses indicate that the 800 m increase in LCL during the LGM is related primarily to the drier atmosphere promoted by lower tropical sea surface temperatures. In contrast, the predicted 1,000 m increase in LCL in the future scenario is the result of a large increase in surface temperature and reduced vegetation cover.     

The relative importance of tropical variability forced from the North Pacific through ocean pathways

To what extent is tropical variability forced from the North Pacific through ocean pathways relative to locally generated variability and variability forced through the atmosphere? To address this question, in this study we use an anomaly-coupled model, consisting of a global, atmospheric general circulation model and a 4½-layer, reduced-gravity, Pacific-Ocean model. Three solutions are obtained; with coupling over the entire basin (CNT), with coupling confined to the tropics and wind stress and heat fluxes in the North and South Pacific specified by climatology (TP), and with coupling confined to the Tropics and wind stress and heat fluxes in the North Pacific specified by output from CNT (NPF). It is found that there are two distinct signals forced in the North Pacific that can impact the tropics through ocean pathways. These two signals are forced by wind stress and surface heat flux anomalies in the subtropical North Pacific. The first signal is relatively fast, impacts tropical variability less than a year after forcing, is triggered from November to March, and propagates as a first-mode baroclinic Rossby wave. The second signal is only triggered during springtime when buoyancy forcing can effectively generate higher-order baroclinic modes through subduction anomalies into the permanent thermocline, and it reaches the equator 4–5 years after forcing. The slow signal is found to initiate tropical variability more efficiently than the fast signal with one standard deviation in subtropical zonal wind stress forcing tropical SST anomalies centered on the equator at 135°W of approximately 0.5°C. Allowing extratropically forced tropical variability is found to shift primarily 2-year ENSO variability in a tropics-alone simulation to a more realistic range of 2–6 years.     

Geotechnical and geological properties of Mokattam limestones: Implications for conservation strategies for ancient Egyptian stone monuments

Geotechnical and geological properties of limestone samples from the Mokattam Quarry in Cairo, Egypt, were determined in order to provide prior information for the selection of suitable methods for the conservation of stone monuments around Cairo. A commercial chemical consolidant (Wacker OH 100) was applied to fill the pore spaces and to strengthen the weathered rock. Filling of pore spaces was confirmed by the decrease of both porosity and permeability of rock samples after the application of the consolidant. Analysis by mercury porosimeter showed most effective consolidation results for pore spaces from 0.75 to 1.0 µm in diameter, which were those mainly observed in the samples. Ultrasonic velocity did not show any significant evidence but an increase in strength, observed as an increase in the point load index after the consolidation process was completed, confirmed that the filling and consolidation process worked effectively. Point load testing can thus be used in preference when the number of samples available for laboratory testing is limited. From the color analysis, it was shown that there was no noticeable color change after the application of consolidant Wacker OH 100. The combinations of laboratory tests adopted in this study can be applicable to the planning of conservation of other stone monuments.     

New dinosaur tracks from Korea, Ornithopodichnus masanensis ichnogen. et ichnosp. nov. (Jindong Formation, Lower Cretaceous): implications for polarities in ornithopod foot morphology

Twelve trackways of ornithopods from Lower Cretaceous lacustrine margin deposits of the Jindong Formation represent new dinosaur trackways described from Korea. The site, discovered during highway construction, was rescued by removing the most important trackways to the Korean Natural Heritage Center in Daejeon, where they are on permanent display. The new ichnotaxon Ornithopodichnus masanensis ichnogen. et ichnosp. nov. is recognized as a distinctive robust tridactyl track, slightly wider than long (l/w ratio = 0.91), with positive (inward) rotation. The toe prints are very thick, broad and U-shaped, resulting in a trefoil outline with a smoothly rounded hind margin. Digit III is short and projects anteriorly much less than digit II and IV (= weak mesaxony). Divarication of digits II-IV is about 70° with interdigital angle II-III larger than III-IV. Trackway width is narrow and the stride length/track length ratio is about 4.2–4.6. The Ornithopodichnus trackways evidently represent gregarious blunt-toed Iguanodon-like bipedal ornithopods, although poorly preserved manus traces are discerned in a few trackways. Ornithopodichnus is distinct from other well known iguanodontid tracks that display much stronger mesaxony and indicates a polarity in ornithopod foot morphology that can be verified by reference to known foot skeletons.     

Application of Column Chromatography for Accurate Determination of the Carbon Isotopic Compositions of n-alkanes in Diverse Environmental Samples

Ocean Science Journal - The carbon isotopic compositions (δ13C) of n-alkanes in various environmental samples have been previously proposed as suitable fingerprints for assessing the origin of...