Monotone Regression and Correction for Order Relation Deviations in Indicator Kriging

The indicator kriging (IK) is one of the most efficient nonparametric methods in geo-statistics. The order relation problem in the conditional cumulative distribution values obtained by IK is the most severe drawback of it. The correction of order relation deviations is an essential and important part of IK approach. A monotone regression was proposed as a new correction method which could minimize the deviation from original quintiles value, although, ensuring all order relations.     

Bringing GPS into harsh environments for fully automated deformation monitoring

Engineering projects that require deformation monitoring frequently utilize geodetic sensors to measure displacements of target points located in the deformation zone. In situations where control stations and targets are separated by a kilometer or more, GPS can offer higher precision position updates at more frequent intervals than can normally be achieved using total station technology. For large-scale deformation projects requiring the highest precision, it is therefore advisable to use a combination of the two sensors. In response to the need for high precision, continuous GPS position updates in harsh deformation monitoring environments, a software has been developed that employs triple-differenced carrier-phase measurements in a delayed-state Kalman filter. Two data sets were analyzed to test the capabilities of the software. In the first test, a GPS antenna was displaced using a translation stage to mimic slow deformation. In the second test, data collected at a large open pit mine were processed. It was shown that the delayed-state Kalman filter developed could detect millimeter-level displacements of a GPS antenna. The actual precision attained depends upon the amount of process noise infused at each epoch to accommodate the antenna displacements. Higher process noise values result in quicker detection times, but at the same time increase the noise in the solutions. A slow, 25 mm displacement was detected within 30 min of the full displacement with sigma values in E, N and U of ±10 mm or better. The same displacement could also be detected in less than 5 h with sigma values in E, N and U of ±5 mm or better. The software works best for detecting long period deformations (e.g., 20 mm per day or less) for which sigma values of 1–2 mm are attained in all three solution components. It was also shown that the triple-differenced carrier-phase observation can be used to significantly reduce the effects of residual tropospheric delay that would normally plague double-differenced observations in harsh GPS environments.

A bootstrap based space–time surveillance model with an application to crime occurrences

This study proposes a bootstrap-based space–time surveillance model. Designed to find emerging hotspots in near-real time, the bootstrap based model is characterized by its use of past occurrence information and bootstrap permutations. Many existing space–time surveillance methods, using population at risk data to generate expected values, have resulting hotspots bounded by administrative area units and are of limited use for near-real time applications because of the population data needed. However, this study generates expected values for local hotspots from past occurrences rather than population at risk. Also, bootstrap permutations of previous occurrences are used for significant tests. Consequently, the bootstrap-based model, without the requirement of population at risk data, (1) is free from administrative area restriction, (2) enables more frequent surveillance for continuously updated registry database, and (3) is readily applicable to criminology and epidemiology surveillance. The bootstrap-based model performs better for space–time surveillance than the space–time scan statistic. This is shown by means of simulations and an application to residential crime occurrences in Columbus, OH, year 2000.     

Geochemistry of the Mian-Lue ophiolites in the Qinling Mountains, central China: Constraints on the evolution of the Qinling orogenic belt and collision of the North and South China Cratons

The Anzishan ophiolite, a typical ophiolitic block of early Carboniferous age in the Mian-Lue suture zone of the Qinling Mountains, central China, consists of amphibolites/metabasalts, gabbros and gabbroic cumulates. All of these rocks, as well as those in the Hunshuiguan-Zhuangke (HZ) block, have compositions similar to normal MORB and back-arc basin basalts (BABB) with high ε_Nd(t) values, indicating that they were derived from a depleted mantle source. The Mian-Lue suture zone also contains blocks of other lithologies, e.g., rift volcanic rocks in the Heigouxia block and arc volcanic rocks in the Sanchazi block. Although they are in fault contact with each other, the presence of these different blocks in the Mian-Lue suture zone may represent a complete Wilson cycle, from initial rifting to open ocean basin to final subduction and continent-continent collision, during the late Paleozoic-early Triassic. In this region, the North and South China Cratons were separated by Paleo-Tethys at least until the early Carboniferous, and final amalgamation of both cratons along the Qinling orogenic belt took place in the Triassic.     

Numerical simulation of migration–accumulation of oil resources

Numerical simulation of oil migration and accumulation is to describe the history of oil migration and accumulation in basin evolution. It is of great value to the evaluation of oil resources and to the determination of the location and amount of oil deposits. This thesis discusses the characteristics of petroleum geology and permeation fluid mechanics. For the three-dimensional problems of Dongying hollow of Shengli Petroleum Oil Field, it puts forward a new model and a kind of modified method of upwind finite difference fractional steps implicit interactive scheme. For the famous hydraulic experiment of secondary migration–accumulation, the numerical simulation test has been done, and both the computational and experimental results are basically identical. For the actual problem of Dongying hollow, the numerical simulation test and the actual conditions are basically coincident. Thus, the well-known problem has been solved.     

Estimating hydraulic conductivity using grain-size analyses, aquifer tests, and numerical modeling in a riverside alluvial system in South Korea

Hydraulic conductivity (K) for an alluvial system in a riverbank filtration area in Changwon City, South Korea, has been studied using grain-size distribution, pumping and slug tests, and numerical modeling. The alluvial system is composed of layers: upper fine sand, medium sand, lower fine sand, and a highly conductive sand/gravel layer at the base. The geometric mean of K for the sand/gravel layer (9.89?×?10^?4 m s^?1), as determined by grain-size analyses, was 3.33 times greater than the geometric mean obtained from pumping tests (2.97?×?10^?4 m s^?1). The geometric mean of K estimates obtained from slug tests (3.08?×?10^?6 m s^?1) was one to two orders of magnitude lower than that from pumping tests and grain-size analyses. K estimates derived from a numerical model were compared to those derived from the grain-size methods, slug tests and pumping tests in order to determine the degree of deviation from the numerical model. It is considered that the K estimates determined by the slug tests resemble the uppermost part of the alluvial deposit, whereas the K estimates obtained by grain-size analyses and pumping tests are similar to those from the numerical model for the sand/gravel layer of the riverside alluvial system.     

靖远矿区采煤沉陷区复垦综合评价方法研究

以靖远矿区为例,从土地复垦和恢复生态学的角度出发,建立了靖远矿区采煤沉陷区复垦综合评价系统,选择土壤条件（土层厚度、土壤质地、有机质含量、土壤水分）、地形改造条件（地面坡度、地表破坏程度、改造难易程度）、气候及水文条件（年降雨量、灌溉条件）作为分类及评价因子对复垦潜力进行评价。将采煤沉陷地分为四种潜力区,对每种潜力类型区的复垦开发利用方向进行了优化设计,从理论上和实践上对靖远矿区采煤沉陷地的复垦能力以及复垦过程中用地结构的优化作了探讨,以期对当地沉陷地的复垦提供一定的科学依据。     

The contact binary system YY Eri

Relatively new and unanalysed photometric data-sets of the contact binary system YY Eri are presented. The light curves have been analysed using information limit optimization techniques, and the Binary Maker program of Bradstreet (1992).Comparison of the results allows insight into determinacy questions affecting the W UMa type of light curve, which relates to our general understanding of contact binaries. A limiting contact configuration cannot be ruled out on the basis of empirical data-analysis alone.Very careful analysis of the photospheric flux distribution over the surface of the Sun may help establish appropriate values of the gravity brightening parameter for cool dwarf stars. At present, however, empirical photometric information on contact binaries is non-discriminatory: i.e. alternative cosmogonies can find alternative support from available evidence. The implication is then for more and better observational data to allow better real independent parameter determination.     

振冲碎石桩处理黄土地基的效果分析

振冲碎石桩在不同的地基中有不同的作用,本文就某热电厂工程中用振冲碎石桩处理湿陷性黄土地基,消除地基的湿陷性;处理饱和(软)黄土地基,提高其承载能力,以及用振冲桩消除地基中饱和粉细砂的振动液化等效果,用试验和理论计算加以分析和讨论。     

生物炭对磷石膏中磷的固化作用

磷石膏中的磷在雨水淋滤作用下浸出,将污染堆场附近水体。本研究采用生物炭固化磷石膏中的磷,以减少其对周遭水体的污染。主要通过模拟固化实验和对照浸出实验,分析生物炭用量、反应时间和温度、初始pH值对固化效果的影响,通过XRD、SEM-EDS分析固化后的生成物。实验结果显示,在生物炭用量为25 mg时,单位固化量达到最大值13.20 mg/g;在反应温度T=293 K、初始pH=7条件下,反应平衡时间72 h时浸出液的磷平衡浓度C_e= 1.40 mg/L;温度提升有助于提高生物炭的固化效果,当T=308 K时,浸出液的磷平衡浓度C_e=0.167 mg/L;碱性条件有利于固化反应持续进行,在pH=11条件下,浸出液的磷平衡浓度C_e=0.153 mg/L。实验结果表明生物炭对磷石膏中的磷具有明显的固化效果。磷石膏中的二水硫酸钙溶解后,Ca²⁺与表面带负电的生物炭结合,在生物炭显微结构的凹陷处,化学吸附溶液中的磷酸根生成了絮状、团簇状的羟基磷灰石(HAP)沉淀,从而使浸出磷得到有效控制。