Statistical approach to determine the salinized ground water flow path and hydrogeochemical features around the underground LPG cavern,Korea

The ground water flow path of the coastal area in the Yellow Sea, Korea, was interpreted using both the cross‐correlation analysis of hydraulic properties and the principal component analysis (PCA) of ground water chemistry. Data was obtained from observation wells in the underground liquefied petroleum gas (LPG) cavern constructed in the coastal area of Pyeongtaek. Cross‐correlation results showed that the operating pressure became more influenced on artificial factors for the variation of the groundwater level of the study area (45–66% of correlation coefficient) even though its affecting area was limited to the region with fractures or faults, and also showed that the delay time from the variation of operating pressure to the fluctuation of ground water level were relatively long periods (28–31 days). Three hydrogeochemical events (encrusted cement dissolution, host rock dissolution, and seawater intrusion), which were dominantly influenced on ground water quality, could be induced from the result of PCA. Quantitative evaluation for these events using the mixed equation with principal component scores suggest that the dissolution of encrusted cement materials was the predominant factor (39·0% of the total mixed proportion) to change the chemical composition of the seepage water during the ground water flow from the observation wells to the cavern. Integration of the statistical results also imply that ground water flow and hydrogeochemistry were predominantly affected by artificial factors such as cavern operation pressure and dissolution of encrusted cement materials, which were interdependent factors on the observation wells with high cross‐correlation coefficients and pH. Copyright © 2007 John Wiley & Sons, Ltd.     

Shear-zone deformation and bulk strain in granite-greenstone terrain of the Western Superior Province,Canada

The later Archaean history of the granite-greenstone terrain of the western Superior Province in Manitoba was marked by the development of numerous shear zones with varying orientation and sense of movement. Data are presented on the orientation, width and displacement of 15 shear zones in a 61,000 km² area east of Lake Winnipeg. By making simplifying assumptions, estimates are made of the orientation of the maximum compressive stress (N-S) and the bulk shortening strain caused by the shear zone displacements (39–45%).The estimates of shear zone displacement strain are compared with estimates of bulk strain obtained by analysing the granite-greenstone shape pattern over a large area of the western Superior Province, again making simplifying assumptions. As expected, the contribution of the more ductile greenstones to the bulk strain is proportionately greater. A value of around 40% is indicated for the bulk shortening strain.Estimates of mean shear strain obtained both from shear zone displacement/width measurements and from strain profiles show a wide range in values from around 10 in some narrow zones to around 1 in very wide zones.     

Evidence against the core/cover interpretation of the southern sector of the Menderes Massif,west Turkey

The Menderes Massif, in western Anatolia, has been described as a lithological succession comprising a basal ‘Precambrian gneissic core of sedimentary origin’ overlain in sequence by ‘Palaeozoic schist’ and ‘Mesozoic-Cenozoic marble’ forming the envelope. The boundary between core and schist envelope was interpreted as a major unconformity, the ‘Supra-Pan-African unconformity’. By contrast, our field observations and geochemical data show that around the southern side of Besparmak Mountain, north of Selimiye (Milas), the protoliths of highly deformed, mylonitized augen gneisses are granitoid rocks intrusive into the adjacent Palaeozoic metasedimentary schists. The field relationships indicate the age of intrusion to be younger than late Permian and there is no evidence for the existence of either an exposed Precambrian basement or the ‘Supra-Pan-African unconformity’ in this sector of the Menderes Massif.     

SDINS/GPS in-flight alignment using GPS carrier phase rate

The alignments of the strapdown inertial navigation system (SDINS) utilizing GPS carrier phase rate measurements is introduced. In this paper, a measurement model of GPS carrier phase rate under two antenna configurations is derived in order to be used for the SDINS alignment process. For in-flight alignment, the performance of the proposed SDINS/GPS integration method is analyzed using the covariance analysis and the overall performance is briefly confirmed by the navigation result of a van test. Furthermore, we find that during in-flight alignment the proposed SDINS/GPS integrated system using GPS carrier phase rate measurements can be implemented in real time because the integer ambiguity problem resulting from carrier phase measurements is avoided.     

The low seismic activity of the Korean Peninsula surrounded by high earthquake countries

Although the Korean Peninsula is locatednear several great earthquake regions suchas NE China and SW Japan, it has neversuffered from catastrophic earthquakes forthe last 2000 years according to historicaland instrumental records. We investigatedthe low seismicity of Korea based on thehypothesis of the Baikal-Korea Plate (BKP)or Amurian Plate movement which isinitiated by the Baikal Rift Zone spreadingin a southeastward motion with acounter-clockwise rotation due to thecollision of the Indian Plate against theEurasian Plate. Many disastrous earthquakesof NE China, SW Japan and Sakhalin releaselarge amounts of seismic energy along theboundary of the Baikal-Korea Plate. It isnecessary to compute the released seismicenergy along the presumed boundary of theBaikal-Korea Plate compared to the KoreanPeninsula in order to estimate themicro-plate boundary. The total energyreleases (1900–1999) from the majordisastrous earthquakes (M6.0) alongthe Baikal-Korea plate are about10³–10⁴ times as much as theKorean Peninsula (M3.0). The focalmechanisms for the intra-continentalearthquakes near and/or along theBaikal-Korea Plate boundary of NE China, SW Japan, Sakhalin and Mongolia mostlyrepresent the horizontal motions of theright-lateral strike slip type, indicatingthat the Baikal-Korea Plate is acounter-clockwise and transcurrent motion. The relative displacement vectors of GPS(global positioning system) also indicatedthat the Baikal-Korea Plate movescounter-clockwise around the KoreanPeninsula. These factors may indicate thatthe Korean Peninsula is not located at thePlate boundary, but just within a margin ofthe Baikal-Korea Plate which movessoutheastward with a counter-clockwiserotation from the Baikal Rift Zone in NEAsia. Therefore there is no enoughaccumulated strain to generate largeearthquakes in the Korean Peninsula and itmakes the Korean Peninsula free fromseismic hazard of large catastrophicearthquakes.     

Retracking considerations in spaceborne GNSS-R altimetry

The European Space Agency Passive Reflectometry and Interferometry System In-orbit Demonstrator (IoD) aims to perform mesoscale altimetric observations by measuring the Global Navigation Satellite System (GNSS) opportunity signals reflected over the sea surface. Altimetry based on GNSS reflectometry (GNSS-R) is significantly affected by satellite motion, since it requires relatively long integration times to reduce noise. We present the impact of the satellite motion on the GNSS-R observables and the need to retrack the waveforms. By using a detailed GNSS-R space mission simulator, the change of delay difference between the direct and the reflected signals during the incoherent averaging of the waveform has been investigated. Their effects on the waveform shape and the altimetric performance are presented comparing the aligned and non-aligned waveforms. Results show that the performance of spaceborne GNSS-R altimeter is seriously degraded without a proper alignment of the waveform samples.     

A simulation of Asian dust events in March 2010 by using the ADAM2 model

Asian dust events occurred in Asia during March 2010 were simulated using the Asian Dust Aerosol Model 2 (ADAM2). The performance of the model for simulations of surface dust concentrations and dust event occurrences was tested at several monitoring sites located in the dust source region and the downstream region of Korea. The observed and modeled dust event occurrences at each monitoring site were defined with the hourly observed and modeled dust concentrations that were used to evaluate the performance of the model by constructing a contingency table for the dust event occurrence. It was found that the model simulated quite well the starting and ending times of dust events with their peak dust concentrations for most dust events occurred both in the dust source region and the downstream region of Korea. However, the model failed to simulate a few dust events observed in both regions mainly due to the inaccurate simulations of the meteorological fields. Inaccurate simulations of wind speeds have caused for the model to simulate dust events poorly in the dust source region whereas poor simulations of precipitation of the fifth-generation mesoscale model (MM5) model have led to miss dust events in the downstream region of Korea. The contingency table made with the hourly data for the dust event occurrence made it possible to evaluate the ADAM2 model for the simulation of the dust event occurrence. It was found that the model has the probabilistic simulation capability for dust events of about 78% with the hit rate of more than 83% and the false alarm rate of about 27% for the dust events occurred during March in 2010. The probabilistic capability of the model could be much improved by improving the meteorological model (MM5 model).