The Ohlsbach Plume – Discharge of deep saline water from the crystalline basement of the Black Forest, Germany

 Salt-water discharges from a fault system in the crystalline basement of the Black Forest into the gravel aquifer of the Kinzig River valley near Ohlsbach, upper Rhine River valley, southwestern Germany. The salt water (TDS, 16 g/kg) ascends from a reservoir at  1 3 km depth. Once discharged into the gravel aquifer, the saline deep water mixes with fresh groundwater and is carried along the groundwater flow path to the middle of the Rhine River valley. There, the natural geogene salt-water plume merges with a man-made chloride-rich infiltration zone along the Rhine River. The plume was mapped using (1) chloride data from groundwater observation wells, and (2) resistivity data from geoelectric sounding. Background chloride is about 7 mg/kg. In the central region of the plume, chloride concentration exceeds 200 mg/kg. A continuous area of Cl  1 50 mg/kg is distinguished from the discharge fault to the Rhine River over a distance of 12 km. Resistivities range from  1 50 Ω in uncontaminated regions to <7 Ω in the 700 m-long central region of the plume. A low resistivity plume (7–10 Ω) stretches for  1 7 km into the Rhine River valley. The two plume maps are in good agreement. Received, April 1998 / Revised, November 1998, January 1999 / Accepted, January 1999     

A magnetic scaleheight: the effect of toroidal magnetic fields on the thickness of accretion discs

We consider accreting systems in which the central object interacts, via the agency of its magnetic field, with the disc that surrounds it. The disc is turbulent and, so, has a finite effective conductivity. The field sweeps across the face of the disc, thereby forming a current that is directed radially within the disc. In turn, this disc current creates a toroidal field, where the interaction between the disc current and the toroidal field produces a Lorentz force that compresses the disc. We investigate this compression, which creates a magnetic scaleheight of the disc that can be much smaller than the conventional scaleheight. We derive an analytic expression for the magnetic scaleheight and apply it to fully ionized discs.     

Evidence for inherent nonlinearity in temporal rainfall

We examine the underlying structure of high resolution temporal rainfall by comparing the observed series with surrogate series generated by a invertible nonlinear transformation of a linear process. We document that the scaling properties and long range magnitude correlations of high resolution temporal rainfall series are inconsistent with an inherently linear model, but are consistent with the nonlinear structure of a multiplicative cascade model. This is in contrast to current studies that have reported for spatial rainfall a lack of evidence for a nonlinear underlying structure. The proposed analysis methodologies, which consider two-point correlation statistics and also do not rely on higher order statistical moments, are shown to provide increased discriminatory power as compared to standard moment-based analysis.     

用海洋可控源电磁法确定油气储层边界的研究

After decades of research and development, Marine Controlled Source ElectroMagnetics （MCSEM） has come into the application phase for oil and gas exploration. However, presently 3D modeling of MCSEM is far from practical with simple models and much computing time. Based on a forward modeling study of 3D frequency-domain MCSEM over a complicated target body and its sensitivity analysis, we derive a method which can delineate the edges of the resistive reservoir. We use the second derivative of the magnitude versus offset （MVO） curve to define the resistive reservoir edges. For the air-wave-dominated far field zone, we suggest using the less affected apparent resistivities in order to improve the adaptability of the method.     

Coil response inversion for very early time modelling of helicopter‐borne time‐domain electromagnetic data and mapping of near‐surface geological layers

Very early times in the order of 2–3 μs from the end of the turn‐off ramp for time‐domain electromagnetic systems are crucial for obtaining a detailed resolution of the near‐surface geology in the depth interval 0–20 m. For transient electromagnetic systems working in the off time, an electric current is abruptly turned off in a large transmitter loop causing a secondary electromagnetic field to be generated by the eddy currents induced in the ground. Often, however, there is still a residual primary field generated by remaining slowly decaying currents in the transmitter loop. The decay disturbs or biases the earth response data at the very early times. These biased data must be culled, or some specific processing must be applied in order to compensate or remove the residual primary field. As the bias response can be attributed to decaying currents with its time constantly controlled by the geometry of the transmitter loop, we denote it the ‘Coil Response’. The modelling of a helicopter‐borne time‐domain system by an equivalent electronic circuit shows that the time decay of the coil response remains identical whatever the position of the receiver loop, which is confirmed by field measurements. The modelling also shows that the coil response has a theoretical zero location and positioning the receiver coil at the zero location eliminates the coil response completely. However, spatial variations of the coil response around the zero location are not insignificant and even a few cm deformation of the carrier frame will introduce a small coil response. Here we present an approach for subtracting the coil response from the data by measuring it at high altitudes and then including an extra shift factor into the inversion scheme. The scheme is successfully applied to data from the SkyTEM system and enables the use of very early time gates, as early as 2–3 μs from the end of the ramp, or 5–6 μs from the beginning of the ramp. Applied to a large‐scale airborne electromagnetic survey, the coil response compensation provides airborne electromagnetic methods with a hitherto unseen good resolution of shallow geological layers in the depth interval 0–20 m. This is proved by comparing results from the airborne electromagnetic survey to more than 100 km of Electrical Resistivity Tomography measured with 5 m electrode spacing.     

Punctuated environmental change along the Holocene (<6 ka) bank margin of south-west Exuma Sound, Bahamas

Characteristics of environmental change along the Holocene (<6 ka BP) bank margin of south‐west Exuma Sound, Bahamas, are defined by comparing mineral, isotope and lithologic stratigraphic patterns in deep‐water (1081 m) slope strata in ODP Hole 631A (Exuma Sound) with proximal (≈6 km) shoal‐water and insular geology of the Lee Stocking Island (LSI) region. After platform submergence, a bank‐top transition from non‐skeletal‐ to skeletal‐dominated deposition occurred in the LSI region by ≈3·8 ka, and is recorded in the adjacent slope sediments by a contemporaneous change in the abundance of transported allochems. The transition at Site 631 is punctuated by an anomalous shift in foraminiferal δ¹³C (–1‰) and δ¹⁸O (–3‰), which may represent a period of climate change that established a brackish coastal zone at least 6 km wide, coincident (≈3·8–4 ka) with bank‐top erosion and pedogenesis. Non‐skeletal allochems reappeared in Hole 631A sediments as the dominant transported allochem type by ≈2·4 ka, then again over the last several hundred years, and are contemporaneous with periods of increased platform‐margin circulation in the LSI region. Such rejuvenation of platform circulation may have resulted from rapid relative rises in sea level, superimposed on the net gradual post‐glacial rise. At Site 631, a prominent (25%) decline in aragonite abundance occurred during the period from 2·4 ka to the last few hundred years, and coincided with an increase in magnesian calcite and skeletal debris, and a positive shift in foraminiferal δ¹⁸O values. These patterns lend support to the hypothesis that, during this period, the LSI margin was barred by skeletal shoals, allowing bank‐top trapping of aragonite and hypersaline water, with increased coastal salinity (resulting from reflux of hypersaline waters through the shoals) and/or cooled coastal waters (caused by reduced exchange of warmed bank‐derived water relative to wind‐generated upwelling). Along the Exuma slope, a diagenetic overprint may further enhance the recent decline in aragonite accumulation. Integration of Holocene deep‐water slope and bank‐top stratigraphies along the bank margin of south‐west Exuma Sound reveals a pattern of punctuated environmental change superimposed on longer term development of interglacial conditions.     

A search for the submillimetre counterparts to Lyman break galaxies

We have carried out targeted submillimetre observations as part of a programme to explore the connection between the rest-frame ultraviolet and far-infrared properties of star-forming galaxies at high redshift, which is currently poorly understood. On the one hand, the Lyman break technique is very effective at selecting     galaxies. On the other, 'blank-field' imaging in the submillimetre seems to turn up sources routinely, amongst which some are star-forming galaxies at similar redshifts. Already much work has been done searching for optical identifications of objects detected using the SCUBA instrument. Here we have taken the opposite approach, performing submillimetre photometry for a sample of Lyman break galaxies, the ultraviolet properties of which imply high star formation rates. The total signal from our Lyman break sample is undetected in the submillimetre, at an rms level of ∼0.5 mJy, which implies that the population of Lyman break galaxies does not constitute a large part of the recently detected blank-field submillimetre sources. However, our one detection suggests that with reasonable SCUBA integrations we might expect to detect those few Lyman break galaxies that are far-infrared brightest.     

Characterization of crack distribution: fabric analysis versus ultrasonic inversion

We analyse the relation between rock fabric, expressed by the preferred orientation of rock-forming minerals and microcracks, and elastic anisotropy of crystalline rock from the KTB pilot well. Detailed analyses of mineralogical composition, textures and microcrack fabrics were performed. In addition, ultrasonic velocity measurements of spherical samples in several directions were carried out at various confining pressures, and inverted in terms of the complete set of 21 elastic constants. By comparing the elastic tensors of the rocks at the final confining pressure (at which most of the microcracks are closed) with those at a lower pressure level, it is possible to separate the anisotropy induced by microcracks from that caused by mineral alignment. In contrast to previous work, no a priori knowledge of the type of anisotropy (triclinic, monoclinic, orthotropic etc.), or of the spatial orientation of the symmetry elements (planes, axes) of the cracked rock or of the intact rock is assumed. Furthermore, no restrictive assumptions on the orientation distribution function and the shape of the cracks are needed.
The results show that the elastic anisotropy characteristics, whether they are related to the microcracks or to the rock-forming minerals, are clearly correlated with the directly observed rock fabrics. We show that the symmetry directions of the mineral fabric and of microcrack fabric agree. A further result is that the microcrack-induced anisotropy dominates the other causes of anisotropy at confining pressures smaller than a few tens of megapascals, the situation being reversed at higher pressures. The laboratory data are quantitatively compared with sonic log data from the KTB well, showing the influence of pore fluids, effective pressure and crack density reduction on the anisotropy in situ .     

Spatial distribution, diversity and composition of bacterial communities in sub-seafloor fluids at a deep-sea hydrothermal field of the Suiyo Seamount

Spatial distribution, diversity, and composition of bacterial communities within the shallow sub-seafloor at the deep-sea hydrothermal field of the Suiyo Seamount, Izu-Bonin Arc, Western Pacific Ocean, were investigated. Fluids were sampled from four boreholes in this area. Each borehole was located near or away from active vents, the distance ranging 2–40 m from active vents. In addition, fluids discharging from a natural vent and ambient seawater were sampled in this area. We extracted DNA from each sample, amplified bacterial 16S rRNA genes by PCR, cloned the PCR products and sequenced. The total number of clones analyzed was 348. Most of the detected phylotypes were affiliated with the phylum Proteobacteria, of which the detection frequency in each clone library ranged from 84.6% to 100%. The bacterial community diversity and composition were different between hydrothermal fluids and seawater, between fluids from the boreholes and the vent, and even among fluids from each borehole. The relative abundances of the phylotypes related to Thiomicrospira, Methylobacterium and Sphingomonas were significantly different among fluids from each borehole. The phylotypes related to Thiomicrospira and Alcanivorax were detected in all of the boreholes and vent samples. Our findings provide insights into bacterial communities in the shallow sub-seafloor environments at active deep-sea hydrothermal vent fields.     

Lower Miocene structural evolution of the central Vienna Basin (Austria)

The tectonic evolution of the Vienna Basin overlying the Alpine-Carpathian fold and thrust belt includes two stages of distinct basin subsidence and deformation. The earlier phase contemporaneous with thrusting of the Alpine-Carpathian floor thrust is related to the formation of a wedge-top basin (“piggy-back”), which was connected to the evolving foreland basin (Lower Miocene; c. 18.5–16 Ma). This stage is followed by the formation of a pull-apart basin (Middle to Upper Miocene; c. 16–8 Ma). Sediments of the latter unconformably overly wedge-top basin strata and protected them against erosion.