Southwest Scandinavia, 40–15 kyr BP: palaeogeography and environmental change

Twelve palaeogeographical reconstructions illustrate environmental changes at the southwest rim of the Scandinavian Ice Sheet 40–15 kyr BP. Synchronised land, sea and glacier configurations are based on the lithostratigraphy of tills and intertill sediments. Dating is provided by optically stimulated luminescence and calibrated accelerator mass spectrometry radiocarbon. An interstadial sequence ca. 40–30 kyr BP with boreo‐arctic proglacial fjords and subarctic flora and occasional glaciation in the Baltic was succeeded by a Last Glacial Maximum sequence ca. 30–20 kyr BP, with the closure of fjords and subsequent ice streams in glacial lake basins in Kattegat and the Baltic. Steadily flowing ice from Sweden bordered the Norwegian Channel Ice Stream. A deglaciation sequence ca. 20–15 kyr BP indicates the transgression of arctic waters, retreat of the Swedish ice and advance of Baltic ice streams succeeded by a return to interstadial conditions. When ameliorated ice‐free conditions prevailed in maritime regions, glaciers advanced through the Baltic and when interstadial regimes dominated the Baltic, glaciers expanded off the Norwegian coast. The largest glacier extent was reached in the North Sea around 29 kyr BP, about 22 kyr BP in Denmark and ca. 18 kyr BP in the Baltic. Our model provides new data for future numerical and qualitative landform‐based models. Copyright © 2003 John Wiley & Sons, Ltd.     

Chondrule-like objects and brown glasses in howardites

Abstract— Chondrule-like objects and brown glasses were analyzed in the howardites, Bununu, Malvern, Monticello, Pavlovka, and Yamato 7308. The objects are very similar to chondrules in ordinary and carbonaceous chondrites. Like the brown glasses the chondrule-like objects could have been produced by impact melting that left some crystalline nuclei, followed by a slower cooling rate than for the glasses. Alternatively, these objects are chondrules implanted from chondrite impactors. They are, however, without rims or any adhering matrix. The brown glasses appear to represent melting of average regolithic surface material, except for Monticello and Y7308, both of which have some siliceous glasses. The siliceous glasses could not have been produced by vapor fractionation but by melting of differentiated lithologies such as fayalitic granites. Impact mechanics indicates that howardites with abundant brown glasses came from an asteroid larger than Vesta (>400 km radius), upon which impacts occurred at relative velocities of up to 5 km/s. Howardites with little or no brown glasses came from a smaller parent body. We conclude that at least two parent bodies are likely sources for the basaltic achondrites.     

The earthquake of Carnuntum in the fourth century a.d. – archaeological results, seismologic scenario and seismotectonic implications for the Vienna Basin fault, Austria

Excavations in the former Roman provincial capital of Pannonia Superior, Carnuntum, 40 km east of Vienna revealed damaged masonry structures from many parts of the ancient settlements. A compilation of structurally damaged buildings has formerly been given by Kandler (Acta Archaeol Acad Sci Hung, 41:313–336, 1989), who related damage to an earthquake in the middle of the fourth century a.d. This paper reviews and supplements these data, and discusses the significance of the style of damage. It is concluded that seismic damage is the only likely interpretation for the damaging mechanism. Although archaeological age dating for the individual collapsed buildings only constrains the timing of their destruction to a few decades around 350 a.d., we assume a single damaging event. In spite of the restrictions on damage assessment by the nature of the archaeological data, it is possible to give a reasonable appraisal of macroseismic intensity. The tentative seismological interpretation of damage leads to an intensity estimate of about nine of the European macroseismic scale (EMS-1998). Comparison with macroseismic data of modern earthquakes in the region, which show a rapid decrease of intensity with distance form the epicentre, indicate a near-by seismic source unless exceptionally high epicentral intensities are assumed for the fourth century event. The most likely source is an active sinistral strike-slip fault (Lassee Fault) passing about 8 km NW of the archaeological site. The fault belongs to Vienna Basin fault system with about 2 mm sinistral movement per year. The system is characterized by fault segmentation and distinct seismicity along the different segments. Moderate seismicity during the last centuries at the southern segments (e.g., Schwadorf 1927, I ₀=8) strongly contrasts from the Lassee fault segment with Carnuntum as the only known severe earthquake. The earthquake of Carnuntum provides evidence for the overall seismic style of deformation along this segment, which previously has not been regarded seismically active. Also, the fourth century earthquake is the strongest event known from the Vienna Basin fault so far.     

Methods to calculate sedimentation rates of floodplain soils in the middle region of the Elbe River

This study presents different methods to quantify the historic and recent sedimentation of floodplain soils along the Elbe River. These methods include the comparison of surface elevations, the quantification of sedimentation with the aid of anthropogenic and geogenic tracers, sediment trap studies, and the calculation of load balances. Selected results from sites at the lower section of the middle Elbe River are presented and verified. The results show that several methods are suitable. In future work it should be possible, depending on the available soil and sediment data, to calculate sedimentation in Elbe River floodplain and the loss of retention volume for larger areas.     

Pulled array continuous electrical sounding with an additional inductive source: an experimental design study

Electrical and electromagnetic profiling methods are used extensively in environmental geophysical investigations for many different purposes. The pulled array continuous electrical sounding (PACES) method, where a tail of electrodes is towed behind a small vehicle while continuously and simultaneously measuring several electrode configurations, has been used extensively for mapping the vulnerability of aquifers in Denmark. Measurements are taken every 1 m, and 10–15 km of profile can be achieved in one day.
This paper presents a theoretical study of the resolution capabilities of PACES measurements as they are now performed, and an experimental design study for including an inductive source in the measuring equipment. The joint interpretation of the galvanic data set of ordinary PACES measurements with inductive data from a horizontal magnetic dipole source will enhance the resolution capabilities of the data set significantly. The study is carried out as an analysis of the uncertainty of the model parameters of one-dimensional three-layer models using the estimation error variances of the inversion problem.
The results indicate that the addition of only two frequency data from a magnetic dipole source will substantially improve the resolution of the subsurface resistivity structure. The improvement is model dependent, but reduction in the relative error of model parameters by an order of magnitude is observed.     

Experimental and Economic Assessment of Two Surfactant Formulations for Source Zone Remediation at a Former Dry Cleaning Facility

Treatability tests and cost analyses were conducted to provide objective criteria for selection of a surfactant formulation to be used for surfactant enhanced aquifer remediation (SEAR) of a tetrachloroethene (PCE)-contaminated site in Oscoda, Michigan. Two surfactant formulations, 4% Tween 80 + 500 mg/L CaCl₂ and 8% Aerosol MA/IPA +15,000 mg/L NaCl + 1000 mg/L CaCl₂, were considered based on their capacity to solubilize PCE and prior use in SEAR applications. Results of a two-dimensional aquifer cell experiment indicated that 53% of the released PCE was recovered after flushing with approximately 8 pore volumes of 4% Tween 80. In contrast, only 3 pore volumes of 8% Aerosol MA/IPA solution were required to recover 78% of the PCE from the two-dimensional aquifer cell, although the greater recovery of PCE was attributed, in large part, to the higher concentration of Aerosol MA. However, mobilization of PCE as free product was observed during the 8% Aerosol MA/IPA flood, which was consistent with total trapping number (N_T) calculations. At the pilot-scale, SEAR treatment costs were estimated to be $222,000 and $244,000 for 4% Tween 80 and 8% Aerosol MA/IPA, respectively, which compared favorably to the estimated pump-and-treat cost of $316,000. Projected full-scale costs, based on a line-drive flushing system, were $382,000 for 4% Tween 80 and $443,000 for 8% Aerosol MA/IPA. In contrast, full-scale pump-and-treat costs were estimated to be $1,167,000. Surfactant recycling was shown to be logistically and economically infeasible at the pilot scale, and provided only a minimal cost benefit for 4% Tween 80 at the full scale. Based on the similarities in solubilization capacity and treatment cost, but substantially lower risk of PCE displacement, Tween 80 was recommended over Aerosol MA/IPA for pilot-scale testing of SEAR.     

蛇绿岩套中超基性岩体的岩石组合:蛇纹岩、异剥钙榴岩和蛇绿碳酸岩——以西阿尔卑斯Zermatt-Saas蛇绿岩为例

蛇纹岩、异剥钙榴岩和蛇绿碳酸岩是蛇绿岩套中超基性单元特有的3类岩石组合,该套岩石组合的形成过程复杂,经历了从地幔岩浆结晶分异、洋脊变质作用改造和俯冲-仰冲构造过程,记录了从地幔岩浆侵位到造山带形成、演化的全程信息。蛇纹岩由方辉橄榄岩、二辉橄榄岩和纯橄岩通过水化和氧化过程而形成;异剥钙榴岩由含水石榴石、符山石、绿帘石族矿物、透辉石和绿泥石等含水和含钙的硅酸盐矿物组成,是由基性岩经历钙交代和水化作用而形成;蛇绿碳酸岩则由高度破碎变形的蛇纹岩角砾和碳酸岩基质(方解石、白云石或菱镁矿)共同组成,碳酸钙主要来自海水参与蛇纹岩化过程产生的富钙热液。阿尔卑斯西部的Zermatt-Saas蛇绿岩体中这3种岩石的组合研究表明:蛇纹岩化过程发生在大洋变质时期,超基性岩体在海水的作用下形成蛇纹岩。蛇纹岩化过程中释放出主要来自斜方辉石和单斜辉石的钙,与水共同作用交代超基性岩体中的基性岩脉,从而形成异剥钙榴岩。蛇绿碳酸岩形成于俯冲变质之前或俯冲变质的早期。这3类岩石一经形成,都经历了其后的叠加变质作用,进而表明Zermatt-Saas蛇绿岩经历了大洋变质、与俯冲、折返和抬升有关的高压变质和区域变质、绿片岩相变质和晚期热液变质作用的pT轨迹演化,代表着西阿尔卑斯从洋脊变质作用到俯?