An Extreme Solar Event of 20 January 2005: Properties of the Flare and the Origin of Energetic Particles

The famous extreme solar and particle event of 20 January 2005 is analyzed from two perspectives. Firstly, using multi-spectral data, we study temporal, spectral, and spatial features of the main phase of the flare, when the strongest emissions from microwaves up to 200 MeV gamma-rays were observed. Secondly, we relate our results to a long-standing controversy on the origin of solar energetic particles (SEP) arriving at Earth, i.e., acceleration in flares, or shocks ahead of coronal mass ejections (CMEs). Our analysis shows that all electromagnetic emissions from microwaves up to 2.22 MeV line gamma-rays during the main flare phase originated within a compact structure located just above sunspot umbrae. In particular, a huge (≈ 10⁵ sfu) radio burst with a high frequency maximum at 30 GHz was observed, indicating the presence of a large number of energetic electrons in very strong magnetic fields. Thus, protons and electrons responsible for various flare emissions during its main phase were accelerated within the magnetic field of the active region. The leading, impulsive parts of the ground-level enhancement (GLE), and highest-energy gamma-rays identified with π ⁰-decay emission, are similar and closely correspond in time. The origin of the π ⁰-decay gamma-rays is argued to be the same as that of lower-energy emissions, although this is not proven. On the other hand, we estimate the sky-plane speed of the CME to be 2 000 – 2 600 km s⁻¹, i.e., high, but of the same order as preceding non-GLE-related CMEs from the same active region. Hence, the flare itself rather than the CME appears to determine the extreme nature of this event. We therefore conclude that the acceleration, at least, to sub-relativistic energies, of electrons and protons, responsible for both the major flare emissions and the leading spike of SEP/GLE by 07 UT, are likely to have occurred nearly simultaneously within the flare region. However, our analysis does not rule out a probable contribution from particles accelerated in the CME-driven shock for the leading GLE spike, which seemed to dominate at later stages of the SEP event. S.N. Kuznetsov deceased 17 May 2007.     

The national geophysical data center bathymetric program

The National Geophysical Data Center's (NGDC's) mission is data management in the broadest sense, playing a role in the nation's research into the environment and providing data to a wide group of users. NGDC also operates components of the International Council of Scientific Unions (ICSU) World Data Center A. The Marine Geology and Geophysics Division of NGDC handles bathymetric data acquisition, manipulation, archival, and dissemination and operates the International Hydrographic Organization Data Center for Digital Bathymetry. Four major data bases have been developed to manage the large volume of data received: the Global Marine Geophysical Data Base (geophysical data acquired in a time series); the NOAA National Ocean Service Hydrographic Data Base; the International Hydrographic Data Base (contains bathymetric data, other than NOS surveys, with no time‐tagging); and the Multibeam Bathymetric Data Base. In addition, gridded data sets such as ETOPO5 are available from NGDC. Bathymetric data are acquired by NGDC through data exchange, funded and contract programs, processing of long‐term data holdings, data digitization from hardcopy sources, and national and international linkages. NGDC personnel participate nationally and internationally on numerous committees associated with studies of the seafloor including charting and bathymetric needs.     

Modelling of a Single-Channel Beta–Gamma Coincidence Phoswich Detector Using Geant4 for the Conversion Electron Energy Peak Resolution and Beta–Gamma Coincidence Efficiency Improvement

In this study, an optimized single-channel phoswich well detector design has been proposed and assessed in order to improve beta–gamma coincidence measurement sensitivity of xenon radioisotopes. This newly designed phoswich well detector consists of a plastic beta counting cell (BC404) embedded in a CsI (Tl) crystal coupled to a photomultiplier tube. The BC404 is configured in a cylindrical pipe shape to minimise light collection deterioration. The CsI (Tl) crystal consists of a rectangular part and a semi-cylinder scintillation part as a light reflector to increase light gathering. Compared with a PhosWatch detector, the final optimized detector geometry showed 15 % improvement in the energy resolution of a ^131mXe 129.4 keV conversion electron peak. The predicted beta–gamma coincidence efficiencies of xenon radioisotopes have also been improved accordingly.     

Large in‐stream wood studies: a call for common metrics

During the past decade, research on large in‐stream wood has expanded beyond North America's Pacific Northwest to diverse environments and has shifted toward increasingly holistic perspectives that incorporate processes of wood recruitment, retention, and loss at scales from channel segments to entire watersheds. Syntheses of this rapidly expanding literature can be facilitated by agreement on primary variables and methods of measurement. In this paper we address these issues by listing the variables that we consider fundamental to studies of in‐stream wood, discussing the sources of variability in their measurement, and suggesting more consistency in future studies. We recommend 23 variables for all studies of in‐stream wood, as well as another 12 variables that we suggest for studies with more specific objectives. Each of these variables relates either to the size and characteristics of in‐stream wood, to the geomorphic features of the channel and valley, or to the ecological characteristics of the riparian zone adjacent to the study reach. The variables were derived from an overview of those cited in the literature and from our collective field experiences. Copyright © 2010 John Wiley & Sons, Ltd.     

Groundwater in fractured crystalline rocks, the Clara mine, Black Forest (Germany)

The chemical composition of water sampled in a 700 m deep underground barite-fluorite mine in the crystalline basement of the Black Forest area (SW Germany) varies systematically with depth and the length of flow paths trough, the fracture porosity of the gneiss matrix. Calcium and sulfate increase as a result of a combined sulfide oxidation and plagioclase alteration reaction. The gneiss contains andesine–plagioclase (An₂₀–An₄₀) and is rich in primary sulfide. As an effect of Ca and SO₄ release by the prime water–rock reaction, dissolved oxygen decreases and the waters become more reduced. The waters have Cl/Br mass ratios of about 50, which is very close to that of experimentally leached gneiss powders indicating that the rock matrix is the source of the halogens. The waters are undersaturated with respect to calcite in the upper parts of the mine. With increasing reaction progress, calcite saturation is reached and carbonate forms as a reaction product of the prime reaction that also controls the partial pressure of CO₂ to progressively lower values. The chemical evolution of groundwater in fractured basement of the Clara mine suggests that the partial pressure of CO₂ is an internally buffered parameter rather than a controlling external variable.     

Geology of the Side Crater of the Erebus volcano,Antarctica

The summit cone of the Erebus volcano contains two craters. The Main crater is roughly circular (∼ 500 m diameter) and contains an active persistent phonolite lava lake ∼ 200 m below the summit rim. The Side Crater is adjacent to the southwestern rim of the Main Crater. It is a smaller spoon-shaped Crater (250–350 m diameter, 50–100 m deep) and is inactive. The floor of the Side Crater is covered by snow/ice, volcanic colluvium or weakly developed volcanic soil in geothermal areas (a.k.a. warm ground). But in several places the walls of the Side Crater provide extensive vertical exposure of rock which offers an insight into the recent eruptive history of Erebus. The deposits consist of lava flows with subordinate volcanoclastic lithologies. Four lithostratigraphic units are described: SC 1 is a compound lava with complex internal flow fabrics; SC 2 consists of interbedded vitric lavas, autoclastic and pyroclastic breccias; SC 3 is a thick sequence of thin lavas with minor autoclastic breccias; SC 4 is a pyroclastic fall deposit containing large scoriaceous lava bombs in a matrix composed primarily of juvenile lapilli-sized pyroclasts. Ash-sized pyroclasts from SC 4 consist of two morphologic types, spongy and blocky, indicating a mixed strombolian-phreatomagmatic origin. All of the deposits are phonolitic and contain anorthoclase feldspar.     

Inversion of band-limited TEM responses

It is shown that the electromagnetic (EM) spectrum is characterized by strong amplitude-modulated transmitters operating in the target bandwidth of transient electromagnetic (TEM) measurements. As these transmitters cause significant noise in TEM soundings, it is mandatory to band-limit the input signals to improve the signal-to-noise ratio and thereby the depth of exploration. Band-limitation will distort the TEM responses, which leads to erroneous inversion results if the applied low-pass filters are not accounted for in the inversion scheme. We incorporate the low-pass filters in the inversion scheme and test the inversion approach on theoretical and field data. Inversion of band-limited theoretical responses results in recovery of erroneous resistivity models if the filters are not included in the inversion scheme. By contrast, inversion of band-limited theoretical and field data, for which the applied low-pass filters are included in the inversion scheme, leads to recovery of similar resistivity models, independent of the applied cut-off frequencies.     

Postglacial rebound and fault instability in Fennoscandia

The best available rebound model is used to investigate the role that postglacial rebound plays in triggering seismicity in Fennoscandia. The salient features of the model include tectonic stress due to spreading at the North Atlantic Ridge, overburden pressure, gravitationally self-consistent ocean loading, and the realistic deglaciation history and compressible earth model which best fits the sea-level and ice data in Fennoscandia. The model predicts the spatio-temporal evolution of the state of stress, the magnitude of fault instability, the timing of the onset of this instability, and the mode of failure of lateglacial and postglacial seismicity. The consistency of the predictions with the observations suggests that postglacial rebound is probably the cause of the large postglacial thrust faults observed in Fennoscandia. The model also predicts a uniform stress field and instability in central Fennoscandia for the present, with thrust faulting as the predicted mode of failure. However, the lack of spatial correlation of the present seismicity with the region of uplift, and the existence of strike-slip and normal modes of current seismicity are inconsistent with this model. Further unmodelled factors such as the presence of high-angle faults in the central region of uplift along the Baltic coast would be required in order to explain the pattern of seismicity today in terms of postglacial rebound stress. The sensitivity of the model predictions to the effects of compressibility, tectonic stress, viscosity and ice model is also investigated. For sites outside the ice margin, it is found that the mode of failure is sensitive to the presence of tectonic stress and that the onset timing is also dependent on compressibility. For sites within the ice margin, the effect of Earth rheology is shown to be small. However, ice load history is shown to have larger effects on the onset time of earthquakes and the magnitude of fault instability.     

Circulatory Patterns of Air Pollutants within the Barcelona Air Basin in a Summertime situation: Lidar and Numerical Approaches

This work examines circulatory patterns of airpollutants in the area of Barcelona (Spain), a regionwith strong coastal and orographic influences. Thiswas achieved through exploitation ofelastic-backscatter lidar data and by numericalsimulation of the atmosphere with a meteorologicalmesoscale model (MEMO). Lidar data were acquired inJuly 1992 during a collaborative campaign between LosAlamos National Laboratory (LANL) and the PolytechnicUniversity of Catalonia (UPC). The lidar providedinformation about the distribution of aerosols and theprevailing winds, determined by application of amaximum cross-correlation algorithm toelastic-backscatter lidar data. Lidar winds are usedto evaluate high altitude winds simulated by themodel. This study showed that circulatory patterns inBarcelona are correlated with daytime convectivevertical mixing, sea-breeze circulations, and verticalforcing caused by mountain thermal and mechanicaleffects.