Establishing a predictive performance indicator for real‐time hybrid simulation

Real‐time hybrid simulation (RTHS) is increasingly being recognized as a powerful cyber‐physical technique that offers the opportunity for system evaluation of civil structures subject to extreme dynamic loading. Advances in this field are enabling researchers to evaluate new structural components/systems in cost‐effective and efficient ways, under more realistic conditions. For RTHS, performance metric clearly needs to be developed to predict and evaluate the accuracy of various partitioning choices while incorporating the dynamics of the transfer system, and computational/communication delays. In addition, because of the dynamics of the transfer system, communication delays, and computation delays, the RTHS equilibrium force at the interface between numerical and physical substructures is subject to phase discrepancy. Thus, the transfer system dynamics must be accommodated by appropriate actuator controllers. In this paper, a new performance indicator, predictive performance indicator (PPI), is proposed to assess the sensitivity of an RTHS configuration to any phase discrepancy resulting from transfer system dynamics and computational/communication delays. The predictive performance indicator provides a structural engineer with two sets of information as follows: (i) in the absence of a reference response, what is the level of fidelity of the RTHS response? and (ii) if needed, what partitioning adjustments can be made to effectively enhance the fidelity of the response? Moreover, along with the RTHS stability switch criterion, this performance metric may be used as an acceptance criteria for conducting single‐degree‐of‐freedom RTHS. Copyright © 2014 John Wiley & Sons, Ltd.     

Comparative analysis of contributing parameters for rainfall-triggered landslides in the Lesser Himalaya of Nepal

In the Himalaya, people live in widely spread settlements and suffer more from landslides than from any other type of natural disaster. The intense summer monsoons are the main factor in triggering landslides. However, the relations between landslides and slope hydrology have not been a focal topic in Himalayan landslide research. This paper deals with the contributing parameters for the rainfall-triggered landslides which occurred during an extreme monsoon rainfall event on 23 July 2002, in the south-western hills of Kathmandu valley, in the Lesser Himalaya, Nepal. Parameters such as bedrock geology, geomorphology, geotechnical properties of soil, and clay mineralogy are described in this paper. Landslide modeling was performed in SEEP/W and SLOPE/W to understand the relationship of pore water pressure variations in soil layers and to determine the spatial variation of landslide occurrence. Soil characteristics, low angle of internal friction of fines in soil, medium range of soil permeability, presence of clay minerals in soil, bedrock hydrogeology, and human intervention were found to be the main contributing parameters for slope failures in the region.     

Studies on some properties of coronal mass ejections based on angular width

The paper investigates the effects of thermal conductivity and non-uniform magnetic field on the gravitational instability of a non-uniformly rotating infinitely extending axisymmetric cylinder in a homogeneous heat conducting medium. The non-uniform rotation and magnetic field are supposed to act along θ and z directions of the cylinder. It is found that the gravitational instability of this general problem is determined by the same criterion as obtained by Dhiman and Dadwal (Astrophys. Space Sci. 325(2):195–200, 2010) for the self-gravitating isothermal medium in the presence of non-uniform rotation and magnetic field with the only difference that adiabatic sound velocity is now replaced by the isothermal sound velocity. It is found that the thermal conductivity has stabilizing effect on the onset of gravitational instability. Further, the stabilizing/destabilizing effect of the non-uniform magnetic field on the gravitational instability of heat conducting medium has been discussed and is illustrated by considering some special forms of the basic magnetic fields.     

Evidence of gas hydrate accumulation and its resource estimation in Andaman deep water basin from seismic and well log data

2D and 3D seismic reflection and well log data from Andaman deep water basin are analyzed to investigate geophysical evidence related to gas hydrate accumulation and saturation. Analysis of seismic data reveals the presence of a bottom simulating reflector (BSR) in the area showing all the characteristics of a classical BSR associated with gas hydrate accumulation. Double BSRs are also observed on some seismic sections of area (Area B) that suggest substantial changes in pressure–temperature (P–T) conditions in the past. The manifestation of changes in P–T conditions can also be marked by the varying gas hydrate stability zone thickness (200–650 m) in the area. The 3D seismic data of Area B located in the ponded fill, west of Alcock Rise has been pre-stack depth migrated. A significant velocity inversion across the BSR (1,950–1,650 m/s) has been observed on the velocity model obtained from pre-stack depth migration. The areas with low velocity of the order of 1,450 m/s below the BSR and high amplitudes indicate presence of dissociated or free gas beneath the hydrate layer. The amplitude variation with offset analysis of BSR depicts increase in amplitude with offset, a similar trend as observed for the BSR associated with the gas hydrate accumulations. The presence of gas hydrate shown by logging results from a drilled well for hydrocarbon exploration in Area B, where gas hydrate deposit was predicted from seismic evidence, validate our findings. The base of the hydrate layer derived from the resistivity and acoustic transit-time logs is in agreement with the depth of hydrate layer interpreted from the pre-stack depth migrated seismic section. The resistivity and acoustic transit-time logs indicate 30-m-thick hydrate layer at the depth interval of 1,865–1,895 m with 30 % hydrate saturation. The total hydrate bound gas in Area B is estimated to be 1.8 × 10¹⁰ m³, which is comparable (by volume) to the reserves in major conventional gas fields.     

Hydrochemistry and sediment characteristics of polar periglacial lacustrine environments on Fisher Island and Broknes Peninsula,East Antarctica

Fisher Island and Broknes Peninsula in the Larsemann Hills constitute part of a polar lowland periglacial environment between marine and glacial ecosystems. The landscape is characterized by gently rolling hills and broad valleys interspersed with lakes formed in glacially scoured basins. We analyzed the physieochemical parameters and the ionic constituents of water samples from 10 lakes in each of these two locations. Our results showed considerable differences between the two regions and demon- strated the influence of lithology and processes including weathering, evaporation, and atmospheric precipitation. All major cations and anions in the lake waters showed positive correlations indicating balanced ionic concentrations. Unconsolidated sediments were sparsely distributed and scattered over glacial deposits, valley fills, and occasional moraine ridges. The type and rate of sedi- mentation was mainly controlled by surface run-off and aeolian influx. The sediment samples from lake beds and the catchment area on Fisher Island were immature and poorly to very poorly sorted, consisting of gravelly sand with negligible silt and finer fractions. Sediments had a polymodal grain size distribution with the two major populations lying between -2 and 1 phi and be- tween 0 and 1.5 phi. The sediments were lithic arenite to arkosic in composition and the microtextures imprinted over quartz grains were dominated by mechanical textures resulting from several stages of glacial crushing and grinding. The presence of deep disso- lution cavities, cryptocrystalline precipitation, and euhedral crystal growth signified the effect of chemical activity after the deposition of grains in the lacustrine environment.     

Petrological considerations for the demineralization of Rajmahal coals with <Emphasis Type="Italic">Pseudomonas mendocina</Emphasis> B6-1

The present study entails the results of the petrological coniderations for demineralization of Rajmahal Gondwana coals with Psudomonas mendocina B6-1. Inertinite group macerals are the dominant constituents of these coals, followed by vitrinite group, while liptinite occurs in low concentration. The amount of Mineral matter is moderately high. The concentration of major, minor and trace elements is high when compared with Clarke values. After the treatment of these coals with Pseudomonas mendocina strain B6-1, a significant reduction in the elemental content of oxygen, hydrogen and sulphur was observed. A gradual reduction of pyrite phase due to bioleaching was identified and its signatures were reflected in the XRD spectra and FTIR absorption bands. Over 5 % reduction in the ash content and decrease of major, minor and trace element to variable degrees were also noticed. Fe, As, and Ca positively correlate with the ash removal percentage indicating that the samples with high concentration of these elements were prone to demineralization with Pseudomonas mendocina strain B6-1 whereas Ni, Zn, Cr and Cu, negatively correlate with the ash removal percentage and shows that their enrichment impeded the process of demineralization. With increasing concentration of vitrinite the removal of major/minor/trace elements also increased which is attributed to the possible association of these elements with the mineral matter occurring as superficial mounting and superficial blanketing over the vitrinite macerals. This could facilitate the bacterial access to the elements to act upon and remove it to the variable extent. Some minerals occur intergrown with inertinites causing restricted bacterial action owing to the nonexposure of the mineral particles and less surface area available to the bacteria for bioleaching. Sulfur removal strongly relates with increase in inertinite content and decrease in liptinite content. This appears that sulfur associated with liptinites have shown difficult removal condition. The maximum removal of the trace elements like Cd, Cu, Co, Zn and Pb was observed from the ‘banded dull coal’ samples of the Rajmahal basin while maximum removal of major/minor elements like Fe, Ca and Mg was noticed from the ‘banded bright coal’ samples. However, maximum removal of Mn and As was also observed in the samples of ‘banded coal’.     

Sea level changes induced by local winds on the west coast of India

The contribution of atmospheric pressure and local wind to sea level variability at Goa (West coast of India) for the period 2007–2008 is investigated. Sea level data from a tide gauge are compared with measured local surface meteorological as well as oceanographic data. Multilinear regression analysis is used to resolve the dependence of sea level on various forcing parameters. The multilinear regression analysis performed over approx. 2-year data shows that the local surface meteorological data and water temperature account for the sea level variability only up to 6%. The accounted sea level variability increases to 25%, when the local wind and the surface currents obtained from satellite altimetry in the near vicinity of the study area are incorporated in the regression analysis. The contribution of local wind increases substantially when the regression is performed over a 2-month duration, and it is variable within the year. During the summer monsoon season (May–September), the sea level variability attributable to wind is up to 47% and 75%, respectively, for 2007 and 2008; however, it reduces to <20% during the winter monsoon (November–February) season. A significant part of the variability observed in sea level remains unaccounted for and is attributed to remote forcing.     

Delineation of coalfield surface fires by thresholding Landsat TM-7 day-time image data

Surface fires are common in coalfields where coal is mined or exposed to sunlight for long durations of time. The heat energy emitted from these fires affects the signal recorded by sensors operating in the shortwave infrared regions of the electromagnetic spectrum. The Landsat TM/ETM+ band-7 is sensitive to solar reflected radiation as well as emitted radiation from a target. The ‘maximum solar reflection threshold’ method proposed in this study uses the highest spectral radiance that can be attributed to solar reflection as the conservative threshold to segregate the pixels with emitted component from those with reflected component of the EM energy. Investigations with Landsat TM/ETM+ data indicate a reflectance value of 0.23–0.25 as the most representative highest reflectance (threshold) in coal mining areas. The method apparently has the advantage that it is based on the reflectance characteristics of materials (sandstone-shale mixtures) typically found in coal mining areas.     

Tropical cyclone contribution to extreme rainfall over southwest Pacific Island nations

Southwest Pacific nations are among some of the worst impacted and most vulnerable globally in terms of tropical cyclone (TC)-induced flooding and accompanying risks. This study objectively quantifies the fractional contribution of TCs to extreme rainfall (hereafter, TC contributions) in the context of climate variability and change. We show that TC contributions to extreme rainfall are substantially enhanced during active phases of the Madden–Julian Oscillation and by El Niño conditions (particularly over the eastern southwest Pacific region); this enhancement is primarily attributed to increased TC activity during these event periods. There are also indications of increasing intensities of TC-induced extreme rainfall events over the past few decades. A key part of this work involves development of sophisticated Bayesian regression models for individual island nations in order to better understand the synergistic relationships between TC-induced extreme rainfall and combinations of various climatic drivers that modulate the relationship. Such models are found to be very useful for not only assessing probabilities of TC- and non-TC induced extreme rainfall events but also evaluating probabilities of extreme rainfall for cases with different underlying climatic conditions. For example, TC-induced extreme rainfall probability over Samoa can vary from ~ 95 to ~ 75% during a La Niña period, if it coincides with an active or inactive phase of the MJO, and can be reduced to ~ 30% during a combination of El Niño period and inactive phase of the MJO. Several other such cases have been assessed for different island nations, providing information that have potentially important implications for planning and preparing for TC risks in vulnerable Pacific Island nations.

     

Petrological and geochemical considerations to predict oil potential of Rajpardi and Vastan lignite deposits of Gujarat, western India

This paper entails the results of the investigations undertaken to assess the oil potential of two lignite deposits, Rajpardi and Vastan, from Gujarat, western India. They are ‘Low rank B’ type lignite. Petrographically, they are enriched in huminite and are low in liptinite and inertinite. Their elevated hydrogen content, in relation to carbon, has probably made them perhydrous in nature and oil prone. The reactivity of these coals during liquefaction has also been discussed in the light of petrofactor. Good correlation has been noticed between oil yield and conversion (r² = 0.999) in both the lignite deposits. The VRr (0.24–0.35% in both lignites), H/C atomic ratio (0.11–1.39 in Rajpardi and 1.09–1.88 in Vastan), reactive maceral content (91.6–99.8 vol % mmf in Rajpardi lignite and 75.5–99.7 vol % in Vastan lignite) and VM_daf (64.8–67.9 wt % in Rajpardi lignite and 42.1–80.0 wt % in Vastan lignite) of these lignites have a favourable range required for a coal to generate oil. Huminite is seen to play a vital role in conversion and maintains a good correlation with it. The calculations show that these lignites have a high conversion (> 95%) and oil yield (> 65%).