Application of organic petrology and geochemistry to coal waste studies

Coal wastes produced during mining activities are commonly deposited in nearby dumps. These wastes mostly composed of minerals and variable amounts (usually 20-30%) of organic matter start to weather immediately after deposition. Oxidation of the organic matter can lead to self heating and self combustion as a result of organic and mineral matter transformations. The degree of alteration depends on the properties of the wastes, i.e., the maceral and microlithotype composition of the organic matter and its rank.Alteration of wastes also depends on the heating history, i.e., the rate of heating, final heating temperature, duration of heating, and the degree of air access. Although air is probably necessary to initiate and drive the heating processes, these usually take place under relatively oxygen depleted conditions. With slow heating, color of organic matter particles changes, irregular cracks and oxidation rims develop around edges and cracks, and bitumen is expelled. As a result, massive and detritic isotropic and strongly altered organic matter forms. On the other hand, higher heating rates cause the formation of devolatilization pores, oxidation rims around these pores and along cracks, vitrinite-bands-mantling particles, and bitumen expulsions.Organic compounds generated from the wastes include n-alkanes, iso-alkanes, alkylcyclohexanes, acyclic isoprenoids, mainly pristane, phytane and, in some cases, farnesane, sesquiterpanes, tri- and tetracyclic diterpanes, tri- and pentacyclic triterpanes, and steranes, polycyclic aromatic hydrocarbons (mostly with two- to five rings, rarely six rings), and phenols. The compounds formed change during the heating history. The fact that phenols are found in dumps where heating has not yet been completed, but are absent in those where heating ceased previously suggests the presence of water washing. The organic compounds formed may migrate within the dumps. However, when they migrate out of the dumps, they become a hazard to environment.This paper is a review on transformations of organic matter (both maceral composition and reflectance and chemical composition) in coal wastes deposited in coal waste dumps. Immediately after deposition the wastes are exposed to weathering conditions and sometimes undergo self heating processes.     

Early Carboniferous (Viséan) emplacement of the collisional Kłodzko–Złoty Stok granitoids (Sudetes, SW Poland): constraints from geochemical data and zircon U–Pb ages

Sensitive high-resolution ion microprobe zircon U–Pb dating and geochemical data of igneous rocks from the composite K?odzko–Z?oty Stok (KZS) Granite Pluton, Sudetic Block, indicate that the granitoids represent an Early Carboniferous Viséan phase of Variscan metaluminous, high-K, I-type, syn-collisional granite magmatism within the Saxothuringian Zone of the Central European Variscides. Igneous zircon records hypabyssal magmatism that produced various granitoids and lamprophyre (spessartite) emplaced from ca. 340 to 331 Ma. The KZS granitoids have compositions ranging from granodiorite to monzonite, low A/CNK ratios (<1), and are associated with abundant mafic members. Most of them are alkaline, highly potassic, and moderately evolved. The major and trace element contents of the KZS granitoids suggest geochemical heterogeneity, and the hybrid nature of magmas derived from a range of sources in the middle crust, with a strong input of material from the upper mantle. Mixing of magmas of mantle origin with high-K material from partly melted continental crust was probably a more important factor than fractional crystallization, in controlling the evolution of the magmas. The mean Pb–U ages of the main population of igneous zircon from a quartz monzodiorite (?elazno) and hornblende monzonite (Droszków) are 340.2 ± 2.5 Ma and 339.5 ± 3.1 Ma, respectively. A slightly younger biotite-hornblende granodiorite from Chwalis?aw, 336.7 ± 2.5 Ma, was cut by a spessartite dyke at 333.1 ± 3.1 Ma. This indicates that mafic magmas were immediately intruded into fractured, probably incompletely solidified, granodiorites. The lamprophyric dyke also contains igneous zircon of Neoproterozoic age, 566.3 ± 6.4 Ma, typical of the crust in the Saxothuringian Zone. Tonalite from Ptasznik Hill near Droszków is of similar age to the spessartite, 331.5 ± 2.6 Ma. High REE contents in the tonalite and its igneous zircon indicate advanced differentiation of granitic magma, producing a more leucocratic melt associated with post-magmatic activity including abundant late crosscutting pegmatites and quartz veins, and contact metasomatic mineralization. The KZS granitoids have rather similar petrographic and geochemical characteristics to granitoids from other parts of the Central European Variscides, where a thickened orogenic root caused a substantial rise in crustal temperatures, producing granitoid magmas closely correlated with regional tectonic activity between the Saxothuringian and Brunovistulia Terranes at the NE margin of the Bohemian Massif.     

Systematic Methodology for Velocity-dependent Gravity Modelling of Density Crustal Cross-Sections, using an Optimization Procedure

The paper describes a new method of gravity modelling of the density cross section along a DSS profile. We propose a systematic procedure of gravity interpretation using structural information contained both in the velocity distribution of the seismic model and the geometry of its layers. The procedure is based on the optimisation of the density parameters of the model. The values of the parameters are limited by relationships between the seismic velocity and the density (optimisation with inequalities). The formulation of the method allows for discussion of the presence of isostasy and the distribution of compensating masses. The discussion is very important for the considered crust-lithosphere system. The presented calculations are done for one Carpathian profile (CEL01). The analysis of the properties of the fitting procedure provides the characteristic depth of subcrustal compensating density structures, the position of crucial tectonic boundaries along the profiles, locations of the crustal areas having exceptional lithology, the regional density differences of subcrustal matter and the estimation of regional deviations from the isostatic equilibrium.     

Comparison of source parameters estimated in the frequency and time domains for seismic events at the Rudna copper mine,Poland

Source parameters estimated in the frequency domain for 100 selected seismic events from the Rudna copper mine, with moment magnitude ranging from 1.4 to 3.6, were collected to study their scaling relations and to compare them with the parameters estimated in the time domain. The apparent stress and static stress drop, corrected for the limited bandwidth recording, increase slightly in a similar manner with increasing seismic moment. The ratio of apparent stress to static stress drop, a measure of radiation efficiency, is practically constant and its mean value is close to 0.1. For 37 seismic events, with moment magnitude between 1.9 and 3.4, source parameters were estimated in the time domain from relative source time functions, that displayed unilateral rupture propagation, and their rupture velocity could be estimated. It ranges from 0.23 to 0.80 of shear wave velocity and is almost independent of seismic moment. The fault length, estimated from the average source pulse width and rupture velocity, is clearly dependent on seismic moment and is smaller than the source radius estimated from the corner frequency on the average by about 25 percent. There is no correlation between the values of static stress drop estimated in the frequency and time domains, but the time domain stress drop is in general similar to that estimated in the frequency domain. The apparent stress increases with increasing rupture velocity, and the ratio of apparent stress to static stress drop seems also to depend on rupture velocity.     

A GIS-based WFD oriented typology of shallow micro-tidal soft bottom using wave exposure and turbidity mapping

Our GIS based project aims at producing a classification scheme to develop a typology of the bottom of the Bay of Gdansk in the southern Baltic. The typology was based on the abiotic factors which are used to define water body types by the European Water Framework Directive (WFD). Significance analysis of particular factors has shown that within the discussed area wave exposure seems to play the most important role. All other factors are to a greater or lesser degree correlated with these two. Taking into consideration the shallows and the varied coastline of the investigated area it was decided to make use of the SWAN numerical wave model to determine the influence of wave impact upon the bottom. The model was used to produce raster maps of orbital velocity near the bottom for each wind scenario. With the help of the GIS analysis the maps were turned into layers: the mean velocity and the maximum velocity at the bottom. To produce the layer of yearly amount of solar radiation a GIS model was built which main parameters were the layer of depth and three layers of turbidity for three seasons. The layers of the maximum orbital velocity and of the solar radiation at the bottom were then used in a classificatory procedure consisted in an iterative sequence of the three following steps: cluster formation, dendrogram analysis and classification using the maximum likelihood method. Ecological importance of the classification has been obtained by means of the aggregation of a part of classes based upon the statistics calculated for them within the GIS system with the help of the zonal function out of the following parameters: salinity, depth, mean and maximum orbital velocity at the bottom, temperature differences between warm and cold seasons, solar radiation, and type of sediments. The method proposed here makes it possible to produce high resolution thematic maps of the bottom even with incomplete data cover of the investigated area.     

Dissolved organic carbon in the southern Baltic Sea: Quantification of factors affecting its distribution

During a cruise of r/v ‘Oceania’ in May 2006, seven vertical dissolved organic carbon (DOC) concentration profiles were produced against a background of CTD, chlorophyll a (chl a) and phaeopigment concentration profiles. The results indicate distinct vertical and spatial DOC fluctuations, ranging from 248 ± 7 μmol C dm⁻³ at 70 m depth at the westernmost station G/06 to 398 ± 5 μmol C dm⁻³ at 5 m depth at station A/06 in the western Gulf of Gdańsk. DOC concentrations were the highest at 10 m depth, where phytoplankton activity was relatively intensive, as reflected by the active chl a concentration distribution. DOC concentrations decreased towards the sea bottom.     

Abundance and Taxonomic Diversity of Bacteria Inhabiting the Sediment-Water Interface in a Marine Harbor Channel

Ocean Science Journal - The abundance of bacteria inhabiting the sediment-water interface and their taxonomic composition were determined with the fluorescence in situ hybridization (FISH) method...     

A high‐resolution Lateglacial and Holocene palaeoceanographic record from the Greenland Sea

We present an unprecedented multicentennial sediment record from the foot of Vesterisbanken Seamount, central Greenland Sea, covering the past 22.3 thousand years (ka). Based on planktic foraminiferal total abundances, species assemblages, and stable oxygen and carbon isotopes, the palaeoenvironments in this region of modern deepwater renewal were reconstructed. Results show that during the Last Glacial Maximum the area was affected by harsh polar conditions with only episodic improvements during warm summer seasons. Since 18 ka extreme freshwater discharges from nearby sources occurred, influencing the surface water environment. The last major freshwater event took place during the Younger Dryas. The onset of the Holocene was characterized by an improvement of environmental conditions suggesting warming and increasing ventilation of the upper water layers. The early Holocene saw a stronger Atlantic waters advection to the area, which began around 10.5 and ended quite rapidly at 5.5 ka, followed by the onset of Neoglacial cooling. Surface water ventilation reached a maximum in the middle Holocene. Around 3 ka the surface water stratification increased leading to subsequent amplification of the warming induced the North Atlantic Oscillation at 2 ka.     

Deglacial to postglacial palaeoenvironments of the Celtic Sea: lacustrine conditions versus a continuous marine sequence

Recent work on the last glaciation of the British Isles has led to an improved understanding of the nature and timing of the retreat of the British?Irish Ice Sheet (BIIS) from its southern maximum (Isles of Scilly), northwards into the Celtic and Irish seas. However, the nature of the deglacial environments across the Celtic Sea shelf, the extent of subaerial exposure and the existence (or otherwise) of a contiguous terrestrial linkage between Britain and Ireland following ice retreat remains ambiguous. Multiproxy research, based on analysis of 12 BGS vibrocores from the Celtic Deep Basin (CDB), seeks to address these issues. CDB cores exhibit a shell‐rich upward fining sequence of Holocene marine sand above an erosional contact cut in laminated muds with infrequent lonestones. Molluscs, in situ Foraminifera and marine diatoms are absent from the basal muds, but rare damaged freshwater diatoms and foraminiferal linings occur. Dinoflagellate cysts and other non‐pollen palynomorphs evidence diverse, environmentally incompatible floras with temperate, boreal and Arctic glaciomarine taxa co‐occurring. Such multiproxy records can be interpreted as representing a retreating ice margin, with reworking of marine sediments into a lacustrine basin. Equally, the same record may be interpreted as recording similar conditions within a semi‐enclosed marine embayment dominated by meltwater export and deposition of reworked microfossils. As assemblages from these cores contrast markedly with proven glaciomarine sequences from outside the CDB, a glaciolacustrine interpretation is favoured for the laminated sequence, truncated by a Late Weichselian transgressive sequence fining upwards into fully marine conditions. Reworked rare intertidal molluscs from immediately above the regional unconformity provide a minimum date c. 13.9 cal. ka BP for commencement of widespread marine erosion. Although suggestive of glaciolacustrine conditions, the exact nature and timing of laminated sediment deposition within the CDB, and the implications this has on (pen)insularity of Ireland following deglaciation, remain elusive.