Terrestrial heat flow around the aseismic front of the Japanese Island Arc

Very few data on heat flow are available in the area around the aseismic front of the Japanese Islands. In order to remedy this situation, measurements of the terrestrial heat flow were made at three locations in the eastern part of Fukushima Prefecture, northeastern Honshu, Japan. The observed values of heat flow were 37 mW/m² (0.88 μcal/cm²·s) at Soma, 52 mW/m² (1.25 μcal/cm²·s) at Kashima and 19 mW/m² (0.46 μcal/cm²·s) at Naraha, respectively. These data partially fill the gaps in the terrestrial heat flow data on land in northeastern Honshu, Japan. These values are considerably lower than the average heat flow over the world, but agree well with the previous estimation for the area.     

Timing of remanent magnetization acquisition in red beds: A case study from a syn-folding sedimentary basin

We propose to explain the origin of the double trend in seismicity of the Macas swarm in the Subandean Cordillera of Cutucú (Ecuador) and characterize the corresponding active deformation of that region. For that purpose, seismological and geological data have been used, with the deployment of a temporary seismological array, with geological field observations and image processing. We found that some earthquakes are aligned on a well known NNE–SSW trend corresponding to the orientation of the nodal planes of the reverse focal mechanism of the M_w=7.0 1995 Macas earthquake as for its aftershocks. Nevertheless, many smaller events are aligned on an unexpected NNW–SSE trend inside the Cutucú Cordillera. We interpret these two orientations of the Macas swarm as linked to Subandean basement thrusts inherited from the inversion tectonics of a NNE–SSW trending Triassic–Jurassic rift, which has been uplifted and partly extruded in the Cutucú Cordillera. The present partitioning of this part of the Subandean deformation is controlled by pre-existing NNE–SSW to NNW–SSE Triassic–Jurassic normal faults that have been subsequently compressed–transpressed and reactivated into reverse faults. Major boundary faults of the rift were NNE–SSW oriented and correspond now to some main Subandean thrusts as confirms the focal mechanism of the 1995 main shock located on the eastern border (Morona frontal thrust) and the orientation of its aftershocks. In the Cutucú Cordillera, the double orientation of present swarm can be interpreted as the result of accommodation of deformation along NNW–SSE pre-existing faults inside the inverted rift system, linked to the motion of the Morona frontal NNE–SSW thrust.     

Isotopic Evaluation on the Genesis of the Kanamaru Pegmatite Deposit, Niigata Prefecture, Japan

Abstract: The Kanamaru pegmatite is one of the two largest pegmatite deposits in Japan and is rich in K–feldspar, which is maximum microcline. The mica minerals and microcline from this ore deposit were studied for K-Ar ages and δ¹⁸O ratios. Biotite gives K-Ar age of 78. 5 Ma, but microcline is much younger in age of 66. 0 and 58. 3 Ma. Oxygen isotopic equilibrium temperature of the biotite-quartz pair is 625°C. Using closure temperature of the K-Ar system for biotite and microcline, cooling rate of the pegmatite is calculated to be 88°C/m. y. at the beginning but 12°C/m. y. in the later period of the cooling history. The microcline is slightly depleted in ¹⁸O, yielding apparent equilibrium temperatures of 230°C and 155°C on quartz-microcline pairs. It is suggested that the fluid phase, magmatic and partly meteoric in origin, contained in the solidifying pegmatite, was interacted with the original orthoclase and converted it to microcline during the subsolidus stage.     

Geochemical behaviour of iron and manganese ions in the Ningyo-Toge uranium deposit district, southwest Japan

The Ningyo-Toge uranium deposit is one of the typical sedimentary uranium deposits in Japan. In general, during weathering, U is removed from the basal granite through underground water. The underground water in this area is rich in U, and has a comparatively high concentration of Fe and Mn.

In this area, three types of Fe minerals can be recognized in different modes of occurrence: (1) in the oxide zone brownish Fe-hydroxide mineral with ferric ion, i.e. goethite (-FeOOH); (2) in the reduced zone of the mine gallery pale-blue Fe-hydroxide mineral with some ferrous ion, i.e. lepidocrocite (γ-FeOOH); and (3) Fe-sulphate minerals such as melanterite (FeSO₄·7H₂O), etc. Some uranyl sulphate minerals, uranopilite and zippeite, are closely associated with these Fe-sulphate minerals. Under weakly alkaline conditions of the oxidizing environment, Mn-hydroxide (MnOOH) coexists with goethite as alternative thin laminae with shale, or coprecipitates resembling a marine Mn nodule, in the size of 0.5 cm in diameter. Radioactive anomalies have been recognized frequently for these Mn sediments due to absorption of Ra by the sediments.     

Fast practical evaluation of soil–structure interaction of embedded structures

A simple and fast evaluation method of soil–structure interaction (SSI) effects of embedded structures is presented via a cone model. The impedances and the effective input motions at the bottom of an embedded foundation are evaluated by means of the cone model. Those quantities are transformed exactly to the corresponding values at the top of the foundation. The evaluated quantities are combined with the super-structure at the top of the foundation. The transfer function amplitude of the interstory drift of a single-degree-of-freedom super-structure is computed for various cases, i.e. no SSI, SSI without embedment, SSI with shallow embedment, SSI with deep embedment. Soil properties are also varied to investigate in more detail the SSI effects of embedded structures. It is found that, while the transfer function amplitude is reduced by the increase of embedment in general, the characteristics of the transfer function amplitude for a very small ground shear wave velocity and large embedment are irregular and complicated.     

Nonlinear surface ground analysis via statistical approach

A statistical approach is proposed for nonlinear surface ground analysis. In contrast to the conventional method which deals with only a single ground motion for equivalent linearization of soil properties, a design response spectrum defined at the upper level (bottom of the surface ground) of an engineering bedrock can be handled as the target design earthquake in the present paper. The effective shear strain in each soil layer is evaluated by means of a statistical procedure in which the mean peak shear strain is computed in terms of its standard deviation and the corresponding peak factor. The stiffness and damping ratio of each soil layer are obtained iteratively from the nonlinear relation of stiffness reduction factors and damping ratios with respect to the strain level. After the evaluation of the equivalent stiffness and damping ratio of every soil layer, the ground surface response spectrum is transformed from the design response spectrum defined at the upper level of the engineering bedrock via the one-dimensional wave propagation theory. The reliability and accuracy of the proposed analysis method is examined through the comparison with the results by the conventional method (represented by the program) for many simulated spectrum-compatible ground motions.     

Origin of the metamorphosed clasts in the CV3 carbonaceous chondrite breccias of Graves Nunataks 06101, Vigarano,Roberts Massif 04143, and Yamato‐86009

We observed metamorphosed clasts in the CV3 chondrite breccias Graves Nunataks 06101, Vigarano, Roberts Massif 04143, and Yamato‐86009. These clasts are coarse‐grained polymineralic rocks composed of Ca‐bearing ferroan olivine (Fa_24–40, up to 0.6 wt% CaO), diopside (Fs_7–12Wo_44–50), plagioclase (An_52–75), Cr‐spinel (Cr/[Cr + Al] = 0.4, Fe/[Fe + Mg] = 0.7), sulfide and rare grains of Fe‐Ni metal, phosphate, and Ca‐poor pyroxene (Fs₂₄Wo₄). Most clasts have triple junctions between silicate grains. The rare earth element (REE) abundances are high in diopside (REE ~3.80–13.83 × CI) and plagioclase (Eu ~12.31–14.67 × CI) but are low in olivine (REE ~0.01–1.44 × CI) and spinel (REE ~0.25–0.49 × CI). These REE abundances are different from those of metamorphosed chondrites, primitive achondrites, and achondrites, suggesting that the clasts are not fragments of these meteorites. Similar mineralogical characteristics of the clasts with those in the Mokoia and Yamato‐86009 breccias (Jogo et al. 2012 ) suggest that the clasts observed in this study would also form inside the CV3 chondrite parent body. Thermal modeling suggests that in order to reach the metamorphosed temperatures of the clasts of >800 °C, the clast parent body should have accreted by ~2.5–2.6 Ma after CAIs formation. The consistency of the accretion age of the clast parent body and the CV3 chondrule formation age suggests that the clasts and CV3 chondrites could be originated from the same parent body with a peak temperature of 800–1100 °C. If the body has a peak temperature of >1100 °C, the accretion age of the body becomes older than the CV3 chondrule formation age and multiple CV3 parent bodies are likely.     

Characteristic of the vertical seismic waves associated with the 1995 Hyogo‐ken Nanbu (Kobe), Japan earthquake estimated from the failure of the Daikai Underground Station

The dynamic behaviour of underground structures built by cut‐and‐cover methods is discussed. A simple model analysis shows that a column supporting the overburden at midspan (central column) can resonate upon incidence of an elastic wave of a specific frequency. The analytical results indicate that not only the size and material properties of the column, but also the static load acting on the column (overburden) is a decisive factor that influences the resonant frequency. Based on the results obtained by the analysis, the mechanism of the failure at the Daikai Underground Station in Kobe caused by the 1995 Hyogo‐ken Nanbu, Japan, earthquake is investigated. It is shown that the wave‐induced damage to underground structures can concentrate on the sections with specific overburden, and from the induced damage, it is possible to estimate the frequency characteristics of the associated seismic waves. Copyright © 2000 John Wiley & Sons, Ltd.     

Effects of alkali and alkaline-earth cations on the high-pressure sound velocities of aluminosilicate glasses

Physics and Chemistry of Minerals - A black tourmaline sample from Seagull batholith (Yukon Territory, Canada) was established to be a schorl with concentrations of Fe2+ among the highest currently...